

EinsteinTC01
Tatung Einstein TC-01
- Size
- 299.7 × 320 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 350
- Nets
- 517
- Pads
- 2,082
- Tracks, vias
- 9,719, 769
- Pours
- 13
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 1 Nov 2025
- Updated
- 25 Sep 2026
Overview
EinsteinTC01 is an open-source printed circuit board by Board-Folk, from the Board-Folk/Einstein-TC-01 repository on GitHub. It is a 2-layer board of 299.7 × 320 mm with 350 parts on 517 nets, routed with 9,719 tracks and 769 vias.
It is built around the BC547, 74LS32SC and BC307, with the 74LS157PC, 74LS74PC and 74LS00SC among its other parts. Its parts include 118 resistors, 88 capacitors, 21 transistors, 7 diodes and 3 connectors.
Main components
9BC547
TO-92Bipolar (BJT)Jiangsu Changjing Electronics Technology (CJ)74LS32SC
-- Logic Gates ROHSTexas InstrumentsLogic GatesBC307
TO-92-31 PNP 100mA 120 130MHz 15nA 300mV 45V 500mW PNP TO-92-3 Bipolar (BJT) ROHSonsemiBipolar (BJT)74LS157PC
PDIP-160℃~+70℃ 4.75V~5.25V Single Supply PDIP-16 Signal Switches, Multiplexers, Decoders ROHSTexas InstrumentsSignal Switches, Multiplexers, Decoders74LS74PC
DIP-140ns 0℃~+70℃ 1 2 20MHz 3.5pF 35ns@5V,50pF 4.5ns 4.75V~5.25V 400uA 74LS Series 8mA 8mA Asynchronous Complementary D-Type Rising Edge Set and Reset DIP-14 Flip FlopsTexas InstrumentsFlip Flops74LS00SC
-0℃~+70℃ 15ns@5V,50pF 2 2.7V 2V 4 4.75V~5.25V 400uA 500mV 74LS 800mV 8mA NAND Gate - Logic Gates ROHSTexas InstrumentsLogic Gates74LS02PC
DIP-140℃~+70℃ 15ns@5V,15pF 2 2.7V 2V 4 4.75V~5.25V 400uA 500mV 74LS 800mV 8mA 8mA NOR Gate DIP-14 Logic Gates ROHSonsemiLogic Gates74LS04PC
PDIP-140℃~+70℃ 4.75V~5.25V 6 6.6mA 74LS PDIP-14 InvertersonsemiInvertersBAT85
DO-341 Independent 200mA 2uA@25V 30V 5A 800mV@100mA DO-34 Schottky Diodes ROHSNexperiaSchottky Diodes
README
README.mdEinstein TC-01
Repository for the 2025 Board Folk recreation of the main board of the Einstein TC-01 computer from Tatung.

This repository contains the Bill-of-Materials (iBOM), Gerbers and Kicad files for a remake of the Tatung Einstein TC-01 main board.
Projects are in Kicad 9.
Revisions
- Version 1.1 Initial Public Release
Modifications
- The 3 digit references have been abridged so they work in Kicad
- The factory modifications (cuts and bodge wires) for the reset circuit have been included on the board
- Bodge capacitor C70 included on board for printer port strobe delay
- A solder jumper next to socket M16 provides the common modification of 5V power to pin 6 on the video output socket as you'd have on a BBC Micro
- Some small silkscreen improvements have been made to avoid confusion
Build Notes
- Power connectors are 5.08mm pin headers
- M6 keyboard pin header is 2.5mm not 2.54mm pitch
- Corner line indicator on transistor footprints signifies flat front side direction, NOT pin 1
- BC307 can be subtituted for BC557
- BC308 can be subtituted for BC558
- Reset switch is the same as the one found on the TRS-80 Model I
- The ADC0844 alternative footprint is a µPD7002 which requires C13 populating with 33nF (untested)
- The value/range of L101 "Chrominance Rejector" is at this time unknown
Archive
Currently contains the original copy of the v1.1 main board, which hasn't changed. The updated main Kicad folder now contains additional symbols and footprints only.
Credit
Mainboard PCB layout by Rob Taylor @peepouk. Schematics recreated by Ian Cudlip @grandoldian.
Expansions
TMSAdapterTC01
Adapter board to allow the use of a TMS9929 chip on the Tatung Einstein TC-01.
EinsteinTC01PS2
Arduino Nano based PS/2 Keyboard Adapter for the TC-01.
EinsteinTC01PS2Mini
ATMEGA328 based PS/2 Keyboard Adapter for the TC-01.
V9958AdapterTC01
Yamaha V9958/V9938 Adapter with 192K Video RAM for the TC-01.
TC02Mini
Simple non-replica remake of the TC-02 80 column adapter for the TC01.
Joystick Adapters
TC01AtariJoystick
Dual Atari Digital Joystick Adapter.
Withdrawn Tandy Joystick Adapter
It turns out the y axis on Tandy joysticks is connected the other way round, which means it will require circuitry to make it work for Einstein games. Trying to think of something clever for that.
Remixes
Einstein CE
Simplified Einstein with bits removed to fit on a small board. See description in folder.
Coming Soon
- Another, comprehensive remix with expansions
Links
10.6875MHz HC-49U Crystal
5 pin "Domino" DIN Socket for Serial Port
Modifyable bracket for holding standard Volume Pot
Thanks
- The rest of the Board Folk Team
Legal
As the product of this project is a replica of a proprietary product, the the author makes no claim of copyright to the schematics nor PCB layouts and releases these into the public domain, solely for the purposes of study and historical preservation.
You are free to produce PCBs based on this project's designs at your own risk and without limitation, for your own use or for sale and/or repair at a reasonable price. Attribution is appreciated. The authors are not obliged to provide support of any kind.
Under no circumstances will the authors be held responsible or liable in any way for losses, damages or costs resulting from the use of the information and/or resources of this project.
The resources are provided "as-is" without warranty of any kind, either expressed or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose.
Parts
350| Qty | Value | Footprint | References |
|---|---|---|---|
| 42 | 100nF | Einstein:C_Disc_10.16mm | C3, C27, C28, C30, C31, C32, C33, C34, C114, C115, C116, C118, C124, C125, C128, C136 +26 |
| 17 | 1K | Einstein:Resistor 12.70mm | R13, R14, R15, R17, R43, R117, R130, R146, R148, R151, R158, R160, R163, R173, R174, R178 +1 |
| 15 | 2K2 | Einstein:Resistor 12.70mm | R1, R2, R3, R4, R7, R12, R38, R40, R41, R42, R46, R48, R50, R136, R165 |
| 13 | BC547 | Einstein:Transistor - Box 1 (Leg Rear) | Q108, Q109, Q110, Q111, Q112, Q113, Q114, Q115, Q120, Q121, Q122, Q124, Q125 |
| 11 | 220R | Einstein:Resistor 12.70mm | R27, R28, R30, R31, R35, R53, R105, R121, R124, R126, R137 |
| 9 | 390R | Einstein:Resistor 12.70mm | R127, R145, R147, R150, R153, R155, R157, R166, R172 |
| 9 | 4K7 | Einstein:Resistor 12.70mm | R8, R10, R11, R45, R57, R58, R101, R116, R176 |
| 8 | 10K | Einstein:Resistor 12.70mm | R18, R37, R47, R54, R55, R62, R63, R120 |
| 8 | 470R | Einstein:Resistor 12.70mm | R21, R22, R23, R24, R25, R26, R51, R125 |
| 8 | TMS4164 | Einstein:DIP-16_W7.62mm | I8, I10, I11, I12, I13, I14, I15, I16 |
| 7 | 10uF 16V | Einstein:Elec_5.08mm - Box | C9, C22, C104, C105, C111, C112, C113 |
| 7 | 2K7 | Einstein:Resistor 12.70mm | R138, R141, R143, R162, R170, R175, R177 |
| 6 | 47uF 16V | Einstein:Elec_5.08mm - Box | C25, C102, C103, C108, C110, C133 |
| 5 | 1N4148 | Einstein:Diode 10.16mm | D1, D2, D3, D100, D101 |
| 5 | 330R | Einstein:Resistor 12.70mm | R52, R132, R133, R135, R167 |
| 5 | 74LS244 | Einstein:DIP-20_W7.62mm | I2, I3, I5, I36, I57 |
| 4 | 100R | Einstein:Resistor 12.70mm | R5, R6, R60, R61 |
| 4 | 74LS32 | Einstein:DIP-14_W7.62mm | I17, I20, I32, I54 |
| 4 | BC307 | Einstein:Transistor - Box 1 (Leg Rear) | Q116, Q117, Q118, Q126 |
| 3 | 100pF | Einstein:C_Disc_12.7mm | C70, C106, C120 |
| 3 | 1K2 | Einstein:Resistor 12.70mm | R34, R115, R168 |
| 3 | 22uF 16V | Einstein:Elec_5.08mm - Box | C121, C126, C132 |
| 3 | 470pF | Einstein:C_Disc_12.7mm | C15, C16, C17 |
| 3 | 68R | Einstein:Resistor 12.70mm | R152, R154, R156 |
| 3 | 74LS157 | Einstein:DIP-16_W7.62mm | I6, I7, I65 |
| 3 | 74LS74 | Einstein:DIP-14_W7.62mm | I25, I31, I51 |
| 3 | 820R | Einstein:Resistor 12.70mm | R32, R33, R122 |
| 3 | 8K2 | Einstein:Resistor 12.70mm | R140, R142, R144 |
| 3 | BC547 | Einstein:Transistor - Box 2 | Q1, Q2, Q3 |
| 3 | WIRE LINK | Einstein:Wire_Link_8.96mm | J50, J51, J52 |
| 2 | 1nF | Einstein:C_Disc_12.7mm | C10, C18 |
| 2 | 22R | Einstein:Resistor 12.70mm | R36, R123 |
| 2 | 2764/128 | Einstein:DIP-28_W15.24mm | I23, I24 |
| 2 | 33uF 16V | Einstein:Elec_5.08mm - Box | C117, C135 |
| 2 | 4016 | Einstein:DIP-14_W7.62mm | I102, I104 |
| 2 | 4416 | Einstein:DIP-18_W7.62mm | I40, I41 |
| 2 | 470uF 16V | Einstein:Elec_5.08mm - Big Box | C6, C23 |
| 2 | 7438 | Einstein:DIP-14_W7.62mm | I45, I46 |
| 2 | 74LS00 | Einstein:DIP-14_W7.62mm | I22, I33 |
| 2 | 74LS02 | Einstein:DIP-14_W7.62mm | I28, I34 |
| 2 | 74LS04 | Einstein:DIP-14_W7.62mm | I21, I47 |
| 2 | 74LS138 | Einstein:DIP-16_W7.62mm | I26, I27 |
| 2 | BAT85 | Einstein:Diode 10.16mm | D4, D5 |
| 2 | Bridge 1 | Einstein:Bodge Bridge | JP4, JP5 |
| 2 | KB GND | TestPoint:TestPoint_THTPad_D1.0mm_Drill0.5mm | TP1, TP2 |
| 2 | NF | Einstein:C_Disc_5.08mm | C12, C13 |
| 2 | ~ | Einstein:M PinHeader_1x08_P2.54mm | M100, M101 |
| 1 | 10.6875MHz | Einstein:Crystal | X1 |
| 1 | 100pF | Einstein:C_Disc_10.16mm | C2 |
| 1 | 100uF 25V | Einstein:Elec_5.08mm - Box | C20 |
| 1 | 100uF 25V | Einstein:Elec_5.08mm - Big Box | C21 |
| 1 | 10R | Einstein:Resistor 12.70mm | R20 |
| 1 | 10nF | Einstein:C_Disc_12.7mm | C26 |
| 1 | 10uH | Einstein:Resistor 12.70mm | L100 |
| 1 | 150K | Einstein:Resistor 12.70mm | R161 |
| 1 | 150R | Einstein:Resistor 12.70mm | R106 |
| 1 | 15K | Einstein:Resistor 12.70mm | R56 |
| 1 | 15pF | Einstein:C_Disc_12.7mm | C7 |
| 1 | 18pF | Einstein:C_Disc_2.54mm | C123 |
| 1 | 1K | Einstein:Volume | R16 |
| 1 | 1K5 | Einstein:Resistor 12.70mm | R171 |
| 1 | 1K8 | Einstein:Resistor 12.70mm | R134 |
| 1 | 1uF 50V | Einstein:Elec_5.08mm - Box | C14 |
| 1 | 2.2nF | Einstein:C_Disc_5.08mm | C134 |
| 1 | 220K | Einstein:Pot | R179 |
| 1 | 220pF | Einstein:C_Disc_12.7mm | C4 |
| 1 | 22pF | Einstein:C_Disc_2.54mm | C127 |
| 1 | 27pF | Einstein:C_Disc_5.08mm | C137 |
| 1 | 2N3906 | Einstein:Transistor - Box 1 (Alt 1+3) No corner marking | Q4 |
| 1 | 3-40pF | Einstein:Trimmer | C131 |
| 1 | 33pF | Einstein:C_Disc_12.7mm | C11 |
| 1 | 33pF | Einstein:C_Disc_2.54mm | C130 |
| 1 | 39R | Einstein:Resistor 12.70mm | R128 |
| 1 | 39pF | Einstein:C_Disc_2.54mm | C122 |
| 1 | 3K3 | Einstein:Resistor 12.70mm | R114 |
| 1 | 4.433619MHz | Einstein:Crystal | X100 |
| 1 | 4013 | Einstein:DIP-14_W7.62mm | I103 |
| 1 | 4066 | Einstein:DIP-14_W7.62mm | I101 |
| 1 | 47K | Einstein:Resistor 12.70mm | R118 |
| 1 | 47nF | Einstein:C_Disc_10.16mm | C5 |
The 287 most common of 350 parts.
More from Board-Folk/Einstein-TC-01
7- 2 layers170 × 170.1 mm

- 2 layers199.6 × 74.2 mm

- 2 layers131.1 × 91.4 mm

- 2 layers77.9 × 86.5 mm

- 2 layers55.9 × 88.9 mm

- 2 layers69.8 × 60.9 mm

- 2 layers63.8 × 53.3 mm

Similar boards
- 4 layers308 × 225.4 mm

- 2 layers407 × 184 mm

TRS-80-Model I G E1
RetroStack/TRS-80-Model-I-G-E1
Hardware Replica of the TRS-80 Model I Revision G
230 parts57MIT - 2 layers244 × 244 mm

- 2 layers407 × 184 mm

TRS-80-Model I Jap50-E1
RetroStack/TRS-80-Model-I-Jap50-E1
Hardware Replica of the TRS-80 Model I Revision HE11E011550
253 parts1MIT - 2 layers248.9 × 139.7 mm

6809 Plus EPROM Version
roberto314/GIMIX_reproduction
Reproducing SS-50 and SS-30 cards and GIMIX Ghost Case and Mainboard
167 parts1BSD-2-Clause - 2 layers486 × 306.3 mm

- 2 layers426 × 307 mm

I7000
felipesanches/Itautec_I7000_KICAD
Esquemáticos do computador Itautec I-7000 G desenhados a partir de inspeção do circuito das PCBs
115 parts - 2 layers379.1 × 273.4 mm

NE Delta
frubem/NE_Delta_Schematics
Forked from https://codeberg.org/hkzlab/NE_Delta_Schematics
185 parts
Questions
How big is the EinsteinTC01 PCB?
It measures 299.7 × 320 mm and has 2 copper layers, 1.6 mm thick.
What parts does the EinsteinTC01 use?
350 parts, built around the BC547, 74LS32SC, BC307 and 74LS157PC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the EinsteinTC01 KiCad files?
From the Board-Folk/Einstein-TC-01 repository on GitHub, at the commit this page was made from: the board is Kicad/EinsteinTC01.kicad_pcb and its schematic Archive/MainBoard/v1.1/Kicad/EinsteinTC01.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the EinsteinTC01 design in my own project?
Its repository states no licence, so its author keeps all rights: ask Board-Folk before reusing the design.