Skip to the content
2 layers41 × 60 mmHermes, the printed circuit board in 3D

Hermes is a 3-Axis accelerometer that uses an embeded mpu6050 for controlling and gyro sensing. It has a Xiao RP2040 as a micro controller for it's compact size and versatile use. It's intended use could be in a bicycle or any other device that's position and gyro data needs to be mesured.

Size
41 × 60 mm
Copper layers
2
Thickness
1.6 mm
Parts
12
Nets
30
Pads
72
Tracks, vias
96, 14
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
2 Jun 2026
Updated
3 Jun 2026

Overview

Hermes is an open-source printed circuit board by rubaiyat666, from the rubaiyat666/Hermes-6-Axis-accelerometer repository on GitHub, published under the MIT licence. It is a 2-layer board of 41 × 60 mm with 12 parts on 30 nets, routed with 96 tracks and 14 vias.

It is built around the MPU-6050. Its parts include 4 capacitors, 2 resistors and 2 ICs. It belongs with the sensors and measurement boards and the RP2040 boards of this library.

Main components

1

README

README.md

Hermes-6-Axis-accelerometer

Hermes is a 6-Axis accelerometer that uses an embeded mpu6050 for controlling and gyro sensing. It has a Xiao RP2040 as a micro controller for it's compact size and versatile use.Designed for real-time motion data visualization in a small, badge-friendly form factor. It's intended use could be in a bicycle or any other device that's position and gyro data needs to be mesured.This is made in kicad and the files needed can be found in this directory.

Features

  • MPU-6050 IMU — 6-axis accelerometer + gyroscope over I2C for real-time motion and orientation tracking
  • 1.28" I2C OLED Display — 128×64 pixel screen for live data readout or custom graphics
  • Seeed XIAO RP2040 — powerful dual-core microcontroller with USB-C, onboard RGB LED, and a tiny footprint
  • Decoupling & Filtering — on-board bypass capacitors (0.1µF, 10nF, 2.2nF) for clean, stable power to both ICs
  • Compact PCB Design — rounded corners, mounting holes, and a clean layout with all components on a single board
  • USB-C Powered — program and power the board directly via the XIAO's USB-C port

BOM

NamePurposeQtyTotal Cost (USD)DistributorLink
PCBThe board5$30.00JLCPCBlink
4.7kΩ ResistorI2C Pull-up2$1.00Digikeylink
10nF CapacitorVoltage stabilization1$1.00Digikeylink
2.2nF CapacitorVoltage stabilization1$1.00Digikeylink
0.1µF CapacitorVoltage stabilization2$3.00Digikeylink
1.3" OLED DisplayOutput display1$5.00Darazlink
Seeed XIAO RP2040MCU1$11.00Darazlink
MPU-6050Accelerometer/Gyroscope1$14.90TDK InvenSenselink

Total Estimated Cost: $66.90

Made by </>RUBAIYAT

Parts

12
QtyValueFootprintReferences
20.1µFCapacitor_SMD:C_0402_1005MetricC1, C2
24.7kΩResistor_SMD:R_0402_1005MetricR1, R2
110nFCapacitor_SMD:C_0402_1005MetricC4
12.2nFCapacitor_SMD:C_0402_1005MetricC3
1LOGOLogo pretty:StasisG***
1LOGOLogo pretty:hackclub_flagG***
1LOGOLogo pretty:spiderG***
1MPU-6050Sensor_Motion:InvenSense_QFN-24_4x4mm_P0.5mmU1
1OLED_128X64_1.3_I2COLED_128X64_1.3_I2C:LCD_OLED_128X64_1.3_I2CDS1
1XIAO-RP2040-DIPHackclub Footprints:XIAO-RP2040-DIPU2

Similar boards

  • 2 layers23 × 120 mmFeather multi oled, the printed circuit board in 3D

    Feather multi oled

    idlehandsdev/volumetric_display

    TENEX OLED Displays

    72 parts312CC-BY-SA-4.0
  • 4 layers95 × 50 mmControl board, the printed circuit board in 3D

    Control board

    ZhuYanzhen1/MM32_CLion

    本项目是全国大学生智能车竞赛GDUT 2022年极速越野组的项目文件。采用了LQR控制器和多速率卡尔曼融合算法,并在单片机上实现。This project is the project document for the GDUT 2022 Extreme Off-Road Category of the National Student Intelligent Vehicle Competition.

    129 parts58AGPL-3.0
  • 2 layers50 × 66 mmBluePhil, the printed circuit board in 3D

    BluePhil

    pms67/BluePhil

    STM32-based development board with various sensors.

    106 parts53MIT
  • 2 layers36 × 43 mmAsac fc rev a, the printed circuit board in 3D

    Asac fc rev a

    victorhook/asac-fc

    asac fc is an rp2040 based flight controller made for FPV drone flying

    119 parts52GPL-3.0
  • 4 layers305 × 208.3 mmControlBoard, the printed circuit board in 3D

    ControlBoard

    paradise-fi/RoFI

    Distributed Metamorphic Robots

    224 parts42
  • 2 layers98.5 × 17.8 mmWeeSpindel, the printed circuit board in 3D

    WeeSpindel

    c-/weeSpindel

    Smaller, simpler version of the iSpindel. NOTE: Work-in-progress

    22 parts17
  • 2 layers36.2 × 36.2 mmDrone PCB, the printed circuit board in 3D

    Drone PCB

    PlumPot55/PCB_Designs

    Source Files of our PCB we did as a community

    50 parts15
  • 2 layers26 × 21.3 mmPModBoard, the printed circuit board in 3D

    PModBoard

    pms67/PModlet

    PMOD PCB with USB-to-UART converter and IMU (MPU-6050, I2C) for FPGAs.

    19 parts15MIT

Questions

How big is the Hermes PCB?

It measures 41 × 60 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Hermes use?

12 parts, built around the MPU-6050. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Hermes KiCad files?

From the rubaiyat666/Hermes-6-Axis-accelerometer repository on GitHub, at the commit this page was made from: the board is Hermes/Hermes.kicad_pcb and its schematic Hermes/Hermes.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Hermes design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).