

Agrinode hub c
- Size
- 130 × 108 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 119
- Nets
- 94
- Pads
- 377
- Tracks, vias
- 1,259, 122
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 27 Sep 2026
- Updated
- 29 Sep 2026
Overview
Agrinode hub c is an open-source printed circuit board by rthcloudcom-art, from the rthcloudcom-art/PCB repository on GitHub. It is a 2-layer board of 130 × 108 mm with 119 parts on 94 nets, routed with 1,259 tracks and 122 vias.
It is built around the CH340C, ESP32-WROOM-32E-N8 and MAX3485ESA, with the LM2596S-5.0, MIC29302WU and DS3231MZ/V+ among its other parts. Its parts include 41 resistors, 24 capacitors, 10 diodes, 10 connectors and 9 transistors. It belongs with the ESP32 boards of this library.
Main components
12CH340C
SOP-16-20℃~+70℃ 2Mbps 3.3V、5V 50uA 7mA Transceiver USB 2.0 SOP-16 USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB ConvertersESP32-WROOM-32E-N8
SMD,25.5x18mm-40℃~+85℃ -98dBm 112mA 2.4GHz 20dBm 239mA 3V~3.6V Bluetooth4.2 ESP32-DOWD-V3 On-board PCB Antenna UART、SDIO、SPI、I2C、GPIO、PWM、I2S SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesMAX3485ESA
SOP-8-40℃~+85℃ 1 1 12Mbps 2.97V~3.63V 256 Half-Duplex Transceiver SOP-8 RS-485 / RS-422 ICs ROHSUMWRS-485 / RS-422 ICsLM2596S-5.0
TO-263-5-40℃~+125℃@(TJ) 1 150kHz 3A 4.5V~40V 5V 5mA Buck Buck Built-in Fixed No TO-263-5 DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersMIC29302WU
TO-263-5-40℃~+125℃@(Tj) 1 26V 370mV@(3A) 37mA 3A 400uVrms、260uVrms Adjustable Over Current Protection、Over Temperature Protection、Reverse connection protection、Enable Positive TO-263-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTECH PUBLICVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsDS3231MZ/V+
SOIC-8-40℃~+85℃ 2.3V~5.5V Built-in I2C Temperature compensation、Backup power management and battery charging、Alarm function、Locking and tamper-proof、Periodic interrupt output SOIC-8 Real Time Clocks ROHSMaxim Integrated (Analog Devices)Real Time ClocksTP4056
ESOP-8-40℃~+85℃ 1 1A 35uA 4.2V 4V~6.5V Charging IC Lithium Battery Support Support 恒流充电、恒压充电、涓流充电、自动再充电、充电终止、可编程充电电流、软启动、欠压锁定 ESOP-8 Battery Management ROHSUMWBattery ManagementMMBT3904
SOT-23-55℃~+150℃ 1 NPN 100 100nA 200mA 200mW 300MHz 300mV 40V 6V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)AO3401A
SOT-231 P-Channel 14nC@10V 30V 47mΩ@10V、60mΩ@4.5V、85mΩ@2.5V 4A 55pF 645pF 80pF 900mV SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETsSS34
SMA(DO-214AC)-55℃~+125℃ 3A 40V 500uA@40V 550mV@3A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes1N4148W
SOD-123150mA 1A 1V@50mA 1uA@75V 400mW 4ns 75V Independent SOD-123 Switching Diodes ROHSSTMicroelectronicsSwitching DiodesBSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETs
README
README.mdAgriNode — سختافزار IoT برای مدیریت هوشمند کشاورزی و دامپروری
خانوادهای از بردهای الکترونیکی برای کنترل، مانیتورینگ و مدیریت گلخانه، مرغداری، دامداری، پرورش ماهی، مزرعه و باغ.
| سند | محتوا |
|---|---|
docs/01-features.md | فاز ۱ — فهرست جامع قابلیتها برای هر کاربری و ترجمهی آن به نیازمندی سختافزاری |
docs/02-architecture.md | فاز ۲ — معماری (نودها + هاب)، تغذیه، قوانین ساخت برای دستگاه کمدقت، اقدامات صنعتی |
docs/03-roadmap.md | فاز ۳ — نقشهی راه بردهای بعدی |
docs/portfolio/ | سبد محصولات (نسخهبندیشده) — کنترلر، برد قدرت، نود بیسیم، پروب هوشمند و راهکار ۱۵ صنعت؛ نسخهی فعلی: v2 (در حال بررسی) |
hardware/hubs/ | بردهای هاب — HUB-W (Wi-Fi)، HUB-L (LoRa)، HUB-C (4G LTE)، GW-LAN (گیتوی LoRa→LAN)؛ هر کدام یک برد دو لایهی جدا با هستهی مشترک |
hardware/lib/ | کتابخانهی سمبل و فوتپرینت برای ساخت با دستگاه کمدقت (پدهای باریکشده، فاصله ≥ 0.55mm) |
hardware/archive/mc1-4layer/ | نسخهی قبلی (برد یکپارچهی ۴ لایه، کنار گذاشته شد) |
hardware/archive/hub1-universal-2layer/ | نسخهی قبلی هاب (یک برد برای همهی انواع، کنار گذاشته شد) |
ساختار مخزن
docs/ اسناد نیازمندی و معماری
hardware/<board>/
design/*.py منبع طراحی مدار (پایتون)
build.py تولید شماتیک KiCad + بررسی نتلیست + BOM + PDF
pcb.py تولید PCB (چیدمان، زونها، قوانین، مسیریابی خودکار)
kicad/ پروژهی KiCad تولیدشده
outputs/ PDF شماتیک، BOM، گزارش DRC، تصاویر
tools/kigen/ کتابخانهی کوچک «مدار به صورت کد» برای تولید فایلهای KiCadپیشنیازها
- KiCad 7 یا جدیدتر (کتابخانههای رسمی symbol و footprint)
- Python 3.10+ (ماژول
pcbnewکه همراه KiCad نصب میشود) - برای مسیریابی خودکار: Java 25 و Freerouting 2.4+
(
FREEROUTING_JARوFREEROUTING_JAVAرا تنظیم کنید)
Parts
119| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100n | Capacitor_SMD:C_1206_3216Metric | C12, C13, C15, C16, C18, C19, C21, C23 |
| 7 | 10k | Resistor_SMD:R_1206_3216Metric | R13, R14, R19, R20, R27, R28, R35 |
| 7 | 1k | Resistor_SMD:R_1206_3216Metric | R4, R17, R18, R26, R39, R40, R41 |
| 5 | 4.7k | Resistor_SMD:R_1206_3216Metric | R21, R22, R23, R36, R37 |
| 5 | MMBT3904 | Package_TO_SOT_SMD:SOT-23 | Q3, Q4, Q6, Q8, Q9 |
| 4 | 10u | Capacitor_SMD:C_1206_3216Metric | C5, C6, C7, C9 |
| 4 | M3 | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 1u | Capacitor_SMD:C_1206_3216Metric | C4, C11, C17 |
| 3 | 220u/10V | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C3, C8, C24 |
| 3 | AO3401A | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q7 |
| 3 | SS34 | Diode_SMD:D_SMA | D6, D7, D8 |
| 3 | SS54 40V/5A | Diode_SMD:D_SMC | D1, D2, D5 |
| 2 | 100k | Resistor_SMD:R_1206_3216Metric | R5, R32 |
| 2 | 100k 1% | Resistor_SMD:R_1206_3216Metric | R9, R10 |
| 2 | 10k 1% | Resistor_SMD:R_1206_3216Metric | R8, R34 |
| 2 | 22 | Resistor_SMD:R_1206_3216Metric | R15, R16 |
| 2 | 22u | Capacitor_SMD:C_1206_3216Metric | C14, C20 |
| 2 | 47k | Resistor_SMD:R_1206_3216Metric | R6, R38 |
| 2 | 680 | Resistor_SMD:R_1206_3216Metric | R30, R31 |
| 2 | MIC29302WU | Package_TO_SOT_SMD:TO-263-5_TabPin3 | U3, U8 |
| 2 | PTC 1.5A/30V | Fuse:Fuse_1812_4532Metric | F1, F2 |
| 1 | 0R JP_NTC (fit if no NTC) | Resistor_SMD:R_1206_3216Metric | JP1 |
| 1 | 0R TERM (end of line) | Resistor_SMD:R_1206_3216Metric | JP2 |
| 1 | 1.2k | Resistor_SMD:R_1206_3216Metric | R1 |
| 1 | 1000u/6.3V low ESR | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C22 |
| 1 | 100u/10V | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C10 |
| 1 | 120 | Resistor_SMD:R_1206_3216Metric | R29 |
| 1 | 16.5k 1% | Resistor_SMD:R_1206_3216Metric | R7 |
| 1 | 18650 Li-ion (protected) | Battery:BatteryHolder_MPD_BH-18650-PC2 | BT1 |
| 1 | 1N4148W | Diode_SMD:D_SOD-123 | D9 |
| 1 | 1u/50V | Capacitor_SMD:C_1206_3216Metric | C2 |
| 1 | 2.2k | Resistor_SMD:R_1206_3216Metric | R24 |
| 1 | 220u/35V | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C1 |
| 1 | 22k 1% | Resistor_SMD:R_1206_3216Metric | R33 |
| 1 | 330 | Resistor_SMD:R_1206_3216Metric | R25 |
| 1 | 330k 1% | Resistor_SMD:R_1206_3216Metric | R11 |
| 1 | 33uH 3A | Inductor_SMD:L_12x12mm_H6mm | L1 |
| 1 | 47k 1% | Resistor_SMD:R_1206_3216Metric | R12 |
| 1 | 5.6k | Resistor_SMD:R_1206_3216Metric | R2 |
| 1 | 5V magnetic buzzer | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | 75k | Resistor_SMD:R_1206_3216Metric | R3 |
| 1 | BAT NTC 10k | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | BOOT / PAIR | Button_Switch_THT:SW_PUSH_6mm | SW2 |
| 1 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q5 |
| 1 | CH340C | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U5 |
| 1 | CR2032 | Battery:BatteryHolder_Keystone_500 | BT2 |
| 1 | DC 12V 5.5/2.1 | Connector_BarrelJack:BarrelJack_Horizontal | J1 |
| 1 | DC IN 7-24V | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J2 |
| 1 | DS3231MZ | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U6 |
| 1 | ESP32-WROOM-32E-N8 | agrinode:ESP32-WROOM-32E_Coarse | U4 |
| 1 | I2C | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J7 |
| 1 | LED STRIP WS2813 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J8 |
| 1 | LM2596S-5.0 | Package_TO_SOT_SMD:TO-263-5_TabPin3 | U1 |
| 1 | LTE MODULE | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J10 |
| 1 | MAX3485ESA | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U7 |
| 1 | PROG | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J6 |
| 1 | PTC 0.75A/16V | Fuse:Fuse_1812_4532Metric | F5 |
| 1 | PTC 1.5A/8V | Fuse:Fuse_1812_4532Metric | F3 |
| 1 | PTC 3A/16V | Fuse:Fuse_1812_4532Metric | F4 |
| 1 | RESET | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | RS-485 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-3-5.08_1x03_P5.08mm_Horizontal | J9 |
| 1 | SM712 | Package_TO_SOT_SMD:SOT-23 | D10 |
| 1 | SMBJ24CA | Diode_SMD:D_SMB | D3 |
| 1 | SMBJ6.0CA | Diode_SMD:D_SMB | D4 |
| 1 | SOLAR 6-24V | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J3 |
| 1 | TP4056 | agrinode:ESOP-8_TP4056_Coarse | U2 |
| 1 | USB 5V / PROG | agrinode:USB_B_THT_Coarse | J4 |
More from rthcloudcom-art/PCB
2- 4 layers240 × 180 mm

- 2 layers150 × 108 mm

Similar boards
- 2 layers200 × 150 mm

- 2 layers105 × 105 mm

GW A
ayaxan7/SolarAlert
SolarAlert is a compact embedded hardware project designed to monitor the health and performance of solar panels.
97 parts - 4 layers100 × 65 mm

- 2 layers220 × 300 mm

Transit
thebenedict/seattletransit-hardware
Schematic and PCB for a circuit board map of Seattle area public transit.
448 parts14CERN-OHL-W-2.0 - 2 layers83.3 × 56.5 mm

- 6 layers71.1 × 150.1 mm

Led bage
caesarakalaeii/rgb-badge
The badge to end all badges, cutomizable functions, crazy tight led matrix
3,235 partsAGPL-3.0 - 2 layers100 × 125 mm

DSP Regulator RevC
Phil-CIA/Development-Station-Power-Supply
3 channel bench supply with current and voltage plotting
235 parts - 2 layers160 × 110 mm

Prepaid meter
kbssrikar7/esp32-energy-meter-pcb
KiCad PCB design for an ESP32-based single-phase energy meter (ATM90E26 metering AFE) — DRC/ERC-clean, SPICE-validated, fab-ready
80 parts
Questions
How big is the Agrinode hub c PCB?
It measures 130 × 108 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Agrinode hub c use?
119 parts, built around the CH340C, ESP32-WROOM-32E-N8, MAX3485ESA and LM2596S-5.0. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Agrinode hub c KiCad files?
From the rthcloudcom-art/PCB repository on GitHub, at the commit this page was made from: the board is hardware/hubs/hub-c/kicad/agrinode_hub_c.kicad_pcb and its schematic hardware/archive/hub1-universal-2layer/kicad/agrinode_hub.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Agrinode hub c design in my own project?
Its repository states no licence, so its author keeps all rights: ask rthcloudcom-art before reusing the design.