2 layers290.1 × 130 mm
2 layers40.6 × 21.6 mm
MCP2517FD Breakout
rt4bc/MCP2517FD-Breakout- Size
- 40.6 × 21.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 17
- Nets
- 18
- Pads
- 60
- Tracks, vias
- 151, 36
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 31 Dec 2020
- Updated
- 8 Jan 2021
Overview
MCP2517FD Breakout is an open-source printed circuit board by rt4bc, from the rt4bc/MCP2517FD-Breakout repository on GitHub, published under the MIT licence. It is a 2-layer board of 40.6 × 21.6 mm with 17 parts on 18 nets, routed with 151 tracks and 36 vias.
It is built around the AMS1117-3.3. Its parts include 7 capacitors, 3 ICs, 2 resistors, 2 connectors and 1 diode. It belongs with the interfaces and adapters boards of this library.
Main components
1README
README.mdMCP2517FD-Breakout
Parts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C6, C7 |
| 2 | 10uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C5 |
| 2 | 22pF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C3 |
| 1 | 100R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | 120R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | Conn_01x04_Male | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | Conn_01x07_Male | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J1 |
| 1 | Crystal | Crystal:Crystal_HC49-U_Vertical | Y1 |
| 1 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | MCP2517FD-xSL | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U1 |
| 1 | MCP2562-E-SN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | TestPoint | TestPoint:TestPoint_Pad_1.0x1.0mm | TP1 |
Similar boards
- 2 layers26.2 × 45.5 mm
PL18 multiprotocol
pascallanger/DIY-Multiprotocol-TX-Module
Multiprotocol TX Module (or MULTI-Module) is a 2.4GHz transmitter module which controls many different receivers and models.
24 parts1.9kGPL-3.0 - 4 layers99 × 53.3 mm
PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0 - 4 layers85 × 56 mm
- 4 layers100 × 54 mm
32Bit shift register
MaltWhiskey/Mega-Cube
16x16x16 PL9823 Cube with Teensy 4.0 and FlexIO driver
64 parts766 - 2 layers44.2 × 29.3 mm
- 2 layers78 × 60 mm
- 2 layers59.1 × 99.9 mm
Cheap FOCer 2 60mm
shamansystems/Cheap-FOCer-2
Low-Cost Motor Controller based on the VESC 6
193 parts407
Questions
How big is the MCP2517FD Breakout PCB?
It measures 40.6 × 21.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MCP2517FD Breakout use?
17 parts, built around the AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MCP2517FD Breakout KiCad files?
From the rt4bc/MCP2517FD-Breakout repository on GitHub, at the commit this page was made from: the board is MCP2517FD-Breakout.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the MCP2517FD Breakout design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).