2 layers150 × 12.5 mm
2 layers81.3 × 72.9 mm
Controller v4.3
RT-CUSTOMZ/Illumigon1WLED-gesteuerte Lichtpanele
- Size
- 81.3 × 72.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 48
- Nets
- 77
- Pads
- 212
- Tracks, vias
- 281, 44
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 5 Sep 2024
- Updated
- 6 Aug 2026
Overview
Controller v4.3 is an open-source printed circuit board by RT-CUSTOMZ, from the RT-CUSTOMZ/Illumigon repository on GitHub. It is a 2-layer board of 81.3 × 72.9 mm with 48 parts on 77 nets, routed with 281 tracks and 44 vias.
It is built around the CH340C, ESP32-WROOM-32E and AP63205WU, with the AMS1117-3.3, SN74LVC1T45DBV and BC857 among its other parts. Its parts include 12 capacitors, 12 resistors, 7 diodes, 5 ICs and 5 transistors. It belongs with the ESP32 boards of this library.
Main components
8
CH340C
SOP-16-20℃~+70℃ 2Mbps 3.3V、5V 50uA 7mA Transceiver USB 2.0 SOP-16 USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB Converters
ESP32-WROOM-32E
SMD,18x25.5mmSMD,18x25.5mm WiFi Modules ROHSEspressif SystemsWiFi Modules
AP63205WU
TSOT-23-6-40℃~+85℃@(TA) 1 1.1MHz 22uA 2A 3.8V~32V 5V Buck Built-in Fixed Overcurrent Protection、Light load efficient mode、Cycle-by-cycle current limiting、Hiccup current limiting、EMI optimization (spread spectrum) Step-down type Yes TSOT-23-6 DC-DC Converters ROHSDiodes IncorporatedDC-DC Converters
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsSN74LVC1T45DBV
SOT-23-6-40℃~+85℃ 1 1 1.65V~5.5V 1.65V~5.5V 420Mbps Bidirectional Tri-State SOT-23-6 Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level Shifters
BC857
SOT-231 PNP 100MHz 100mA 15nA 200mW 45V 5V 650mV 800 PNP SOT-23 Bipolar (BJT) ROHSSTMicroelectronicsBipolar (BJT)MMBT3904
SOT-23-55℃~+150℃ 1 NPN 100 100nA 200mA 200mW 300MHz 300mV 40V 6V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)
SS34
SMA(DO-214AC)-55℃~+125℃ 3A 40V 500uA@40V 550mV@3A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes
README
README.md💡 Illumigon
Die modularen smarten Leuchtpanels mit Wifi-Konnektivität, die Ihr auf der Campuswoche bauen könnt.
📦 Features
- Individuell adressierbare LEDs (WS2811)
- WLAN-fähige Steuerung via ESP32
- Konfigurierbare Animationen und Farbpaletten
- Open Source Hardware + Software (WLED)
- Home Assistant Integration
- Modular steckbar
- Keine Kabelsalat
📁 Dateiübersicht
| Pfad / Datei | Beschreibung |
|---|---|
Fusion 360/ | Fusion 360 Archiv und STEP-Modell |
Gerber/ | Leiterplattenlayouts im Gerber Format |
KiCad/ | Leiterplattenlayouts im KiCad 9 Format |
STLs/ | 3D-Modell im STL-Format für den 3D-Druck |
SVGs/ | Vectorgrafiken zum Laserschneiden und Gravieren |
🧾 Stückliste / Teilebestellung
🧠 ESP32 WLED Controller
| Bauteil | Referenz | Wert | Footprint | Menge | Link |
|---|---|---|---|---|---|
| Keramikkondensator | C3, C4, C5, C7, C8, C9, C10 | 100n | SMD 1206 | 7 | |
| Keramikkondensator | C11, C12 | 22u | SMD 1206 | 2 | |
| Elektrolytkondensator | C1 | 470u | C_Elec_10x10.2 | 1 | |
| Keramikkondensator | C2 | 1u0 | SMD 1206 | 1 | |
| Keramikkondensator | C6 | 10u | SMD 1206 | 1 | |
| Dichschichtwiderstand | R3, R6, R9 | 100R | SMD 0805 | 3 | |
| Dichschichtwiderstand | R8, R11, R12 | 10K | SMD 1206 | 3 | |
| Dichschichtwiderstand | R4, R5 | 5K1 | SMD 1206 | 2 | |
| Dichschichtwiderstand | R7, R10 | 4K7 | SMD 0805 | 2 | |
| Dichschichtwiderstand | R1 | 2K0 | SMD 0805 | 1 | |
| Dichschichtwiderstand | R2 | 470R | SMD 0805 | 1 | |
| Leistungsinduktor | L1 | 4u7 | 7.3x6.6mm | 1 | |
| Leuchtdiode | D1, D2, D3, D5, D6 | LED | SMD 0805 | 5 | |
| Schottky-Diode | D4, D7 | SS34 | SMA | 2 | |
| 3.3V Spannungswandler | U1 | AMS1117-3.3 | SOT-223-3 | 1 | |
| 32-bit Mikrocontroller | U2 | ESP32-WROOM-32E | 1 | ||
| 5V Synchr.-Schaltregler | U3 | AP63205WU | TSOT-23-6 | 1 | |
| 420Mbps Levelshifter | U4 | SN74LVC1T45DBV | SOT-23-6 | 1 | |
| USB-UART Transceiver | U5 | CH340C | SOIC-16 | 1 | |
| Bipolartransistor | Q2, Q3 | BC857 | SOT-23 | 2 | |
| Bipolartransistor | Q4, Q5 | MMBT3904 | SOT-23 | 2 | |
| P-Kanal MOSFET | Q1 | Q_PMOS_GDS | TO-252-2 | 1 | |
| USB-C-Buchse 16-Pin | J1 | USB_C_Receptacle_USB2.0_16P | GCT USB4105 | 1 | |
| Hohlsteckerbuchse | J2 | Barrel_Jack_Switch | 1 | ||
| Pinheader 2.54 2x3 | J3 | Conn_02x03_Odd_Even | 2x03 P2.54mm Vertical | 1 |
💡 Komponenten je Panel
| Bauteil | Referenz | Wert | Footprint | Menge | Link |
|---|---|---|---|---|---|
| Platine | Ecke | 3 | GitHub | ||
| Platine | Seite | 3 | GitHub | ||
| Plexiglas | Lichtleiter | 4mm klar | Acrylglas GS | 1 | GitHub |
| Plexiglas | Diffusor | 3mm opal | Acrylglas XT opal 70105 | 1 | GitHub |
| Pinheader 2x3 | J1 | 02x03 | Vertikal | 3 | LCSC |
| Pinheader 1x5 | J2, J3 | 01x05 | Horizontal | 6 | LCSC |
| Platine | Verbinder | 1 | GitHub | ||
| Pinsocket 2x3 | J1, J2 | 02x03 | Vertikal | 2 | LCSC |
| Pinheader 1x2 | J3, J4 | 01x02 | Vertikal | 2 | LCSC |
| Jumper 1x2 | 01x02 | 1 | LCSC | ||
| Schraube | PZ 3x10 | 3 | Schraubenhimmel | ||
| 3D-Druck | Deckel u. | 3 | GitHub | ||
| 3D-Druck | Deckel m. | 3 | GitHub | ||
| 3D-Druck | Verbinder | 2 | GitHub |
Parts
48| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100n | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C3, C5, C7, C8, C9, C10 |
| 5 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2, D3, D5, D6 |
| 3 | 100R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R6, R9 |
| 3 | 10K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R8, R11, R12 |
| 2 | 10u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C4, C6 |
| 2 | 22u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C11, C12 |
| 2 | 4K7 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7, R10 |
| 2 | 5K1 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R4, R5 |
| 2 | BC857 | Package_TO_SOT_SMD:SOT-23 | Q2, Q3 |
| 2 | MMBT3904 | Package_TO_SOT_SMD:SOT-23 | Q4, Q5 |
| 2 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad_TopBottom | H1, H2 |
| 2 | SS34 | Diode_SMD:D_SMA | D4, D7 |
| 1 | 1u0 | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2 |
| 1 | 2K0 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 470R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | 470u 25V | Capacitor_SMD:C_Elec_10x10.2 | C1 |
| 1 | 4u7 | Inductor_SMD:L_Chilisin_BMRB00060624 | L1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | AP63205WU | Package_TO_SOT_SMD:TSOT-23-6 | U3 |
| 1 | Barrel_Jack_Switch | Connector_BarrelJack:BarrelJack_Horizontal | J2 |
| 1 | CH340C | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U5 |
| 1 | Conn_02x03_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J3 |
| 1 | ESP32-WROOM-32E | RF_Module:ESP32-WROOM-32D | U2 |
| 1 | Q_PMOS_GDS | Package_TO_SOT_SMD:TO-252-2 | Q1 |
| 1 | SN74LVC1T45DBV | Package_TO_SOT_SMD:SOT-23-6 | U4 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | ~ | rt_Logo:RT_Logo_10mm_Silkscreen | SYM1 |
Questions
How big is the Controller v4.3 PCB?
It measures 81.3 × 72.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Controller v4.3 use?
48 parts, built around the CH340C, ESP32-WROOM-32E, AP63205WU and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Controller v4.3 KiCad files?
From the RT-CUSTOMZ/Illumigon repository on GitHub, at the commit this page was made from: the board is KiCad/Controller_v4.3/Controller_v4.3.kicad_pcb and its schematic KiCad/Controller_v4.3/Controller_v4.3.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Controller v4.3 design in my own project?
Its repository states no licence, so its author keeps all rights: ask RT-CUSTOMZ before reusing the design.
More from RT-CUSTOMZ/Illumigon
3- 2 layers31.9 × 24 mm
- 2 layers33 × 14.1 mm
Similar boards
- 2 layers90 × 60 mm
- 2 layers95 × 85 mm
Fiberboard logic min
nguyenduchan/fiberboard
Fiberboard là bo mạch điều khiển logic tích hợp (AIO), không có driver stepper Nema. Cùng chức năng module ESP32 công nghiệp thông dụng: 4 ngõ vào cách ly + 4 relay + RS485.
108 parts - 2 layers84 × 66 mm
Pomodoro timer v5 routed
hinewboy/pomodoro-timer
番茄钟 PCB 项目（KiCad）：原理图、布局布线自动化脚本、JLCPCB 打样生产文件
46 partsMIT - 2 layers114 × 105 mm
Smell monitor v1 1
OpenSmell/smell-monitor
The enclosure is the simple one a builder can hold in their head: an open tray, a board on four standoffs, modules plugged into eight headers, a flat lid with four M3 screws, a filter pad that drops into the front, and…
64 parts - 2 layers30 × 60 mm
Test routed
Shmcandi/esp32-devkit-hardware
Production-grade ESP32-WROOM-32E and ESP32-S3 (N16R8) Dual USB-C development board PCB designs created with Atopile & KiCad 10
26 parts - 4 layers67.5 × 53.5 mm
Flight controller rev2
shazmeenShz/ESP32-Flight-Controller
Custom 4-layer IoT-Ready ESP32 Flight Controller PCB designed in KiCad 8 featuring USB Type-C, CH340C, MP1584 power management, MPU6050 interface, and manufacturing-ready Gerber files.
65 parts3MIT - 2 layers100 × 100 mm
Hour meter board microfit can handroute
ilomon10/embedded-totalizer-hour-meter
ESP32 engine hour meter & totalizer: firmware, SensorFrame protocol, Node host tools, KiCad PCB and a Deno device simulator
152 parts - 2 layers100 × 85 mm
ESP32 MediaCarrier routed
xmyoot/esp32-media-carrier
ESP32 multimedia carrier board with 7–24 V DC buck regulator, 3.2 W Class-D I2S audio amp, WS2812 LED ring driver, and SPI TFT display header
97 partsMIT