4 layers315 × 147.2 mm
2 layers285.8 × 95.3 mm
R60-std
rpedde/r60-stdA standard poker 60% board
- Size
- 285.8 × 95.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 178
- Nets
- 102
- Pads
- 649
- Tracks, vias
- 1,321, 59
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 19 Aug 2017
- Updated
- 21 May 2018
Overview
R60-std is an open-source printed circuit board by rpedde, from the rpedde/r60-std repository on GitHub. It is a 2-layer board of 285.8 × 95.3 mm with 178 parts on 102 nets, routed with 1,321 tracks and 59 vias.
It is built around the ATMEGA32U4-AU and AST1109MLTRQ. Its parts include 69 switches, 65 diodes, 9 capacitors, 5 resistors and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2
ATMEGA32U4-AU
QFP-44(10x10)-40℃~+85℃ 10bit 16MHz 1KB 2.5KB 2.7V~5.5V 26 32KB 8 Bit AVR Built-in FLASH QFP-44(10x10) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
AST1109MLTRQ
--20℃~+70℃ 11mm 1V~20V 20V 2mm 4.1kHz 73dB 9mm Passive (Externally Driven) Piezoelectric SMD - Buzzers ROHSMallory Sonalert Products IncBuzzers
README
readme.mdr60 std
This is just a simple poker 60% board as a base for testing stuff.
It's a 16MHz Atmega32U4 running quantum mechanical keyboard firmware.
It should fit in most (all?) 60% poker cases.
CAD/CAM
I have cnc milled plates for this board using openscad/dxf files generated from this project.
I have cnc milled cases for this board using openscad/stl files generate from this project.
Changelog
Rev 1 (Ordered through easyeda, verified working):
- Initial rev
Rev 1.1 (Ordered through easyeda, verified working) gerbers:
- Changed PTH holes on sides to edge slot cuts, for ease in mfg
Rev 1.2 (Not verified working):
- Silkscreen fixes
- Move speaker connector, allow for direct drive of 8 ohm speaker
Rev 2.0 (Not verified working) gerbers:
- Use SMT diodes rather than through-hole
- Align components to fit better on vortex cases (braces between rows)
Rev 2.1 (Not verified working) gerbers
- Switch SOD-323 footprint diodes to 0805
Rev 3.0 (ISO working, fitment problems with ANSI) gerbers:
- Add option for stepped capslock/control
- Add option for ISO as well as ANSI
Parts
178| Qty | Value | Footprint | References |
|---|---|---|---|
| 65 | D | Keyboard:D_0805 | D0, D0A1, D0B1, D0C1, D0D1, D1, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19 +49 |
| 5 | .1uF | Capacitors_SMD:C_0603 | C3, C4, C5, C6, C7 |
| 3 | 22 | Keyboard:RC_0805 | R1, R2, R5 |
| 2 | 18pF | Capacitors_SMD:C_0603 | C1, C2 |
| 2 | RFN | Keyboard:CHERRY_PCB_100H | K3C1, K4C1 |
| 1 | .1uF | Capacitors_SMD:C_0805 | C9 |
| 1 | 0 | Keyboard:CHERRY_PCB_100H | K0A1 |
| 1 | 1 | Keyboard:CHERRY_PCB_100H | K1 |
| 1 | 10K | Keyboard:RC_0805 | R3 |
| 1 | 10K | Resistors_SMD:R_0603 | R4 |
| 1 | 16MHz | Crystals:Crystal_SMD_3225-4pin_3.2x2.5mm | Y1 |
| 1 | 1uF | Capacitors_SMD:C_0603 | C8 |
| 1 | 2 | Keyboard:CHERRY_PCB_100H | K2 |
| 1 | 3 | Keyboard:CHERRY_PCB_100H | K3 |
| 1 | 4 | Keyboard:CHERRY_PCB_100H | K4 |
| 1 | 5 | Keyboard:CHERRY_PCB_100H | K5 |
| 1 | 6 | Keyboard:CHERRY_PCB_100H | K6 |
| 1 | 7 | Keyboard:CHERRY_PCB_100H | K7 |
| 1 | 8 | Keyboard:CHERRY_PCB_100H | K8 |
| 1 | 9 | Keyboard:CHERRY_PCB_100H | K9 |
| 1 | A | Keyboard:CHERRY_PCB_100H | K21 |
| 1 | AST1109MLT | Keyboard:AST1109ML-SMT | LS1 |
| 1 | ATmega32U4-AU | Housings_DFN_QFN:QFN-44-1EP_7x7mm_Pitch0.5mm | U1 |
| 1 | B | Keyboard:CHERRY_PCB_100H | K35 |
| 1 | BACKSP | Keyboard:CHERRY_PCB_200H_INVERTED | K0D1 |
| 1 | BS_PIPE | Keyboard:CHERRY_PCB_150H | K1D1 |
| 1 | C | Keyboard:CHERRY_PCB_100H | K33 |
| 1 | CAPS | Keyboard:CHERRY_PCB_175H | K20 |
| 1 | CAPS | Keyboard:CHERRY_PCB_125H | K20-S1 |
| 1 | COLON | Keyboard:CHERRY_PCB_100H | K2A1 |
| 1 | COMMA | Keyboard:CHERRY_PCB_100H | K38 |
| 1 | D | Keyboard:CHERRY_PCB_100H | K23 |
| 1 | DOT | Keyboard:CHERRY_PCB_100H | K39 |
| 1 | E | Keyboard:CHERRY_PCB_100H | K13 |
| 1 | ENTER | Keyboard:CHERRY_PCB_225H | K2D1 |
| 1 | EQUAL | Keyboard:CHERRY_PCB_100H | K0C1 |
| 1 | ESC | Keyboard:CHERRY_PCB_100H | K0 |
| 1 | F | Keyboard:CHERRY_PCB_100H | K24 |
| 1 | G | Keyboard:CHERRY_PCB_100H | K25 |
| 1 | H | Keyboard:CHERRY_PCB_100H | K26 |
| 1 | I | Keyboard:CHERRY_PCB_100H | K18 |
| 1 | J | Keyboard:CHERRY_PCB_100H | K27 |
| 1 | K | Keyboard:CHERRY_PCB_100H | K28 |
| 1 | L | Keyboard:CHERRY_PCB_100H | K29 |
| 1 | LALT | Keyboard:CHERRY_PCB_125H | K42 |
| 1 | LBRACE | Keyboard:CHERRY_PCB_100H | K1B1 |
| 1 | LCTL | Keyboard:CHERRY_PCB_125H | K40 |
| 1 | LFN | Keyboard:CHERRY_PCB_125H | K43 |
| 1 | LSHIFT | Keyboard:CHERRY_PCB_225H | K30 |
| 1 | LWIN | Keyboard:CHERRY_PCB_125H | K41 |
| 1 | M | Keyboard:CHERRY_PCB_100H | K37 |
| 1 | MINUS | Keyboard:CHERRY_PCB_100H | K0B1 |
| 1 | N | Keyboard:CHERRY_PCB_100H | K36 |
| 1 | O | Keyboard:CHERRY_PCB_100H | K19 |
| 1 | P | Keyboard:CHERRY_PCB_100H | K1A1 |
| 1 | Q | Keyboard:CHERRY_PCB_100H | K11 |
| 1 | QUOTE | Keyboard:CHERRY_PCB_100H | K2B1 |
| 1 | R | Keyboard:CHERRY_PCB_100H | K14 |
| 1 | RALT | Keyboard:CHERRY_PCB_125H | K48 |
| 1 | RALT-1 | Keyboard:CHERRY_PCB_100H | K48-1 |
| 1 | RBRACE | Keyboard:CHERRY_PCB_100H | K1C1 |
| 1 | RCTL | Keyboard:CHERRY_PCB_125H | K4B1 |
| 1 | RCTL-1 | Keyboard:CHERRY_PCB_100H | K4B1-1 |
| 1 | RGUI | Keyboard:CHERRY_PCB_125H | K4A1 |
| 1 | RGUI-1 | Keyboard:CHERRY_PCB_100H | K4A1-1 |
| 1 | RSHIFT | Keyboard:CHERRY_PCB_275H | K3B1 |
| 1 | RSHIFT | Keyboard:CHERRY_PCB_175H | K3B1-1 |
| 1 | RWIN | Keyboard:CHERRY_PCB_125H | K49 |
| 1 | RWIN-1 | Keyboard:CHERRY_PCB_100H | K49-1 |
| 1 | S | Keyboard:CHERRY_PCB_100H | K22 |
| 1 | SLASH | Keyboard:CHERRY_PCB_100H | K3A1 |
| 1 | SPACE | Keyboard:CHERRY_PCB_625H | K45 |
| 1 | SSPACE-1 | Keyboard:CHERRY_PCB_225H | K44 |
| 1 | SSPACE-2 | Keyboard:CHERRY_PCB_275H | K45-1 |
| 1 | SW_Push | Buttons_Switches_SMD:SW_SPST_TL3342 | SW1 |
| 1 | T | Keyboard:CHERRY_PCB_100H | K15 |
| 1 | TAB | Keyboard:CHERRY_PCB_150H | K10 |
| 1 | U | Keyboard:CHERRY_PCB_100H | K17 |
| 1 | USB_B | Connectors:USB_Mini-B | P1 |
| 1 | V | Keyboard:CHERRY_PCB_100H | K34 |
The 152 most common of 178 parts.
Questions
How big is the R60-std PCB?
It measures 285.8 × 95.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the R60-std use?
178 parts, built around the ATMEGA32U4-AU and AST1109MLTRQ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the R60-std KiCad files?
From the rpedde/r60-std repository on GitHub, at the commit this page was made from: the board is r60-std.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the R60-std design in my own project?
Its repository states no licence, so its author keeps all rights: ask rpedde before reusing the design.
Similar boards
- 4 layers66 × 60 mm
MainFlightComputer
RockSat-X/RSXVT2026
Our experiment aims to evaluate the use of optical navigation with Commercial-off-the-Shelf (COTS) products for use in spaceflight applications.
72 parts3MIT - 2 layers342.9 × 95.3 mm
- 2 layers285 × 95.1 mm
- 4 layers25 × 44 mm
Nordic clicker
yohummus/nordic-clicker
Simple and small remote control based on the nRF52840 SoC
58 parts - 2 layers243.2 × 106 mm
- 2 layers228.4 × 85 mm
LeChiffre
tominabox1/Le-Chiffre-Keyboard
Great thanks goes to Jake at P3D for really making the case amazing and open sourcing his work. Check him out at P3Dstore.com
105 parts183GPL-3.0 - 2 layers228.6 × 76.8 mm
Schwann Rev0.5b
The-Royal/The_Royal_Open-Source-Projects
A Master Repository For All things Royal Made
127 parts159MIT