2 layers53.1 × 56 mm
2 layers51.7 × 119.5 mm
RocketBoard
rotellini9809/rocket_project- Size
- 51.7 × 119.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 23
- Nets
- 58
- Pads
- 158
- Tracks, vias
- 128, 1
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 18 Nov 2023
- Updated
- 27 Oct 2024
Overview
RocketBoard is an open-source printed circuit board by rotellini9809, from the rotellini9809/rocket_project repository on GitHub. It is a 2-layer board of 51.7 × 119.5 mm with 23 parts on 58 nets, routed with 128 tracks and 1 via.
It is built around the ESP32-CAM, L7805 and SRD-05VDC-SL-C. Its parts include 4 switches, 3 ICs, 3 diodes, 2 resistors and 2 connectors. It belongs with the ESP32, RP2040 and RISC-V boards of this library.
Main components
3
ESP32-CAM
插件插件 WiFi Modules ROHSAi-ThinkerWiFi Modules
L7805
TO-220ST0℃~+125℃@(Tj) 1 1.2A 20V 2V@(1A) 42uV 500uA 5V 73dB@(120Hz) Fixed Positive Short Circuit Protection TO-220ST Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSOSENVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
SRD-05VDC-SL-C
插件,19.2x15.6mm100mΩ 10ms 10ms 15A 250V@AC 360mW 5 5V 70Ω Non-Polarized - Single Coil One set changeover: 1C (SPDT - changeover) 插件,19.2x15.6mm Power Relays ROHS松乐Power Relays
README
README.mdrocket_project
Parts
23| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_2.1mm | H1, H2, H3, H4 |
| 2 | 1N4004 | Diode_THT:D_A-405_P7.62mm_Horizontal | D1, D3 |
| 1 | 10K omh | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1 |
| 1 | 150 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 1 | 2N2222 | Package_TO_SOT_THT:TO-92 | Q1 |
| 1 | 9DOF | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | BNO08X1 |
| 1 | ESP32-CAM | ESP32-CAM:ESP32-CAM | U3 |
| 1 | GY-BME-280 Barometer | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | JST_GPS | Connector_JST:JST_EH_S4B-EH_1x04_P2.50mm_Horizontal | JST_GPS1 |
| 1 | L7805 | Package_TO_SOT_THT:TO-220-3_Horizontal_TabDown | U2 |
| 1 | ON/OFF | roba_mia:Schiebeschalter SS-12D00 | SW3 |
| 1 | ON/OFF | SwitchMini:Schiebeschalter SS-12D00 | SW2 |
| 1 | PassiveBuzzer | roba_mia:myBuzzer | J5 |
| 1 | RESET | Button_Switch_SMD:SW_DIP_SPSTx01_Slide_6.7x4.1mm_W8.61mm_P2.54mm_LowProfile | SW1 |
| 1 | RPI-Pico | raspberry pi pico:RPi_Pico_SMD_TH | U1 |
| 1 | RedLED | LED_THT:LED_D3.0mm | D2 |
| 1 | SRD-05VDC-SL-C | roba_mia:ssr-41FDA | K1 |
| 1 | ~ | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | BATT1 |
| 1 | ~ | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | Pyro1 |
Questions
How big is the RocketBoard PCB?
It measures 51.7 × 119.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the RocketBoard use?
23 parts, built around the ESP32-CAM, L7805 and SRD-05VDC-SL-C. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RocketBoard KiCad files?
From the rotellini9809/rocket_project repository on GitHub, at the commit this page was made from: the board is KICAD_files/RocketBoard/RocketBoard.kicad_pcb and its schematic KICAD_files/RocketBoard/RocketBoard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the RocketBoard design in my own project?
Its repository states no licence, so its author keeps all rights: ask rotellini9809 before reusing the design.
More from rotellini9809/rocket_project
1Similar boards
- 2 layers224.2 × 84.1 mm
- 2 layers86.7 × 92.2 mm
- 2 layers38.1 × 63.5 mm
Sstv backpack
vaugerbird/sstv-backpack
A ESP32-CAM SSTV backpack for the Baofeng UV-5R + others!
29 parts94GPL-2.0 - 2 layers146.2 × 99 mm
FPVRover
Circuit-Digest/ESP32-Cam-Surveillance-Car
Watch full video on ESP32 surveillance car
35 parts15 - 2 layers78 × 62 mm
Portier connecte
InnoGreenTech/ESP32-CAM-pir-static-relay
ESP32-CAM mounting on a board with pir, photo-resistor sensors, AC/DC power and a static relay.
16 parts5 - 2 layers188.2 × 129.7 mm
- 2 layers82.3 × 43.5 mm
Night Gogle
airsoftak25/Night-Gogle
My small project about creating a Night vision gogle witch cost less than 2000CZK each
29 parts2 - 2 layers82 × 58 mm
