
Vendinator platine
MakeMagazinDE/Vendinator
Ergänzend zum Artikel in der Make 5/24 findet ihr hier die Sketches, Schaltpläne und Ablaufpläne.

My small project about creating a Night vision gogle witch cost less than 2000CZK each
Night Gogle is an open-source printed circuit board by airsoftak25, from the airsoftak25/Night-Gogle repository on GitHub. It is a 2-layer board of 82.3 × 43.5 mm with 29 parts on 26 nets, routed with 91 tracks and 8 vias.
It is built around the ESP32-CAM and IRL540NPBF. Its parts include 8 diodes, 6 resistors, 2 switches, 1 IC and 1 connector. It belongs with the ESP32 and RISC-V boards of this library.
My small project about creating a Night vision gogle witch cost less than 2000CZK each
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | LED | LED_THT:LED_D5.0mm | D1, D2, D3, D4, D5, D6, D7, D8 |
| 7 | ~ | N-G_board:Pad-3.5mm | GND1, GND2, IR-LED1, IR-Led2, IR-LED3, VIN1, VIN2 |
| 4 | 160R | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2, R3, R4, R5 |
| 1 | 100R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6 |
| 1 | Conn_01x06_Pin | Connector_JST:JST_SH_SM06B-SRSS-TB_1x06-1MP_P1.00mm_Horizontal | J1 |
| 1 | ESP32-CAM | N-G_board:ESP32-CAM | MCU1 |
| 1 | IRL540N | N-G_board:TO254P1524X483-4N | U1 |
| 1 | LOGO | N-G_ graphic:OWO_IMG | G*** |
| 1 | LOGO | N-G_ graphic:SHIKANOKO_IMG | G*** |
| 1 | LOGO | N-G_ graphic:CALIPER_IMG | G*** |
| 1 | SW_Push | N-G_board:TD-03X | SW1 |
| 1 | ~ | N-G_board:255SB (B1408) - Vertical | SW2 |

MakeMagazinDE/Vendinator
Ergänzend zum Artikel in der Make 5/24 findet ihr hier die Sketches, Schaltpläne und Ablaufpläne.




moonbuggy/GPIO-power-switch
A low-side MOSFET switch controlled by a button and GPIO signals


Dixit-Golakiya/Master-Thesis-Project
Custom 2-layer PCB (192 mm × 166 mm) built around a NUCLEO-G474RE evaluation board, providing all sensing and excitation circuitry for the supercapacitor health monitoring system.

hagego/SmartHome
Tools and applications for my simple, very heterogeneous smart home
It measures 82.3 × 43.5 mm and has 2 copper layers, 1.6 mm thick.
29 parts, built around the ESP32-CAM and IRL540NPBF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the airsoftak25/Night-Gogle repository on GitHub, at the commit this page was made from: the board is PCB/Night-Gogle MKI/Night-Gogle.kicad_pcb and its schematic PCB/Night-Gogle MKI/IR-LedSetup.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask airsoftak25 before reusing the design.