Skip to the content
2 layers40 × 23 mmEnoki, the printed circuit board in 3D

Allen Synthesis version of the Toadstool Tech Enoki SSD1306 OLED Module

Size
40 × 23 mm
Copper layers
2
Thickness
1.6 mm
Parts
18
Nets
29
Pads
70
Tracks, vias
126, 19
Pours
1
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
21 Jan 2024
Updated
14 Feb 2024

Overview

Enoki is an open-source printed circuit board by roryjamesallen, from the roryjamesallen/Enoki-Allen-Synthesis repository on GitHub. It is a 2-layer board of 40 × 23 mm with 18 parts on 29 nets, routed with 126 tracks and 19 vias.

Its parts include 7 capacitors, 5 resistors and 3 connectors.

README

README.md

Enoki

By Toadstool Tech

image

  • SSD1306 OLED Controller
  • 128x64 pixel display
  • SPI and I²C compatible, with I²C as the default protocol
  • Two addresses available (0xC and 0xD), set by external pin (default 0xC with pin low or floating)
  • Breadboard compatible
  • 40x23mm (Eurorack compatible in modules of 8HP or greater width)

Parts

18
QtyValueFootprintReferences
52.2uFCapacitor_SMD:C_0805_2012MetricC1, C2, C4, C5, C7
410KResistor_SMD:R_0603_1608MetricR1, R2, R3, R5
210uFCapacitor_SMD:C_0805_2012MetricC3, C6
2Conn_01x02_PinConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical_SMD_Pin1RightJ2, J3
2Cut for SPIJumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mmJP1, JP2
1330KResistor_SMD:R_0603_1608MetricR4
1Conn_01x08_MaleConnector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical_SMD_Pin1LeftJ1
1OLED-128O064Dallen-synthesis:KH-FPC0.5-H2.0SMT-30P-QCH FPC Connector 30 pinDS1

More from roryjamesallen/Enoki-Allen-Synthesis

1
  • 2 layers40.6 × 39.7 mmEnoki-1u panel, the printed circuit board in 3D

    Enoki-1u panel

    roryjamesallen/Enoki-Allen-Synthesis

    Allen Synthesis version of the Toadstool Tech Enoki SSD1306 OLED Module

    3 parts1

Similar boards

  • 2 layers27.9 × 16.5 mmPowerSSO-24 breakout, the printed circuit board in 3D

    PowerSSO-24 breakout

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    18 parts1.2k
  • 2 layers42.7 × 13.7 mmStm32-mini12864, the printed circuit board in 3D

    Stm32-mini12864

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    18 parts1.1kGPL-3.0
  • 2 layers41.2 × 46.6 mmThumb cluster left, the printed circuit board in 3D

    Thumb cluster left

    JesusFreke/lalboard

    A 3D-printed keyboard inspired by the DataHand

    18 parts993
  • 2 layers44 × 51.3 mm4272MAVcoder R4, the printed circuit board in 3D

    4272MAVcoder R4

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    18 parts915
  • 2 layers28.3 × 14.3 mmTap Photosensor PCB, the printed circuit board in 3D

    Tap Photosensor PCB

    VoronDesign/Voron-Tap

    Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:

    18 parts716GPL-3.0
  • 2 layers20.3 × 15.2 mmL0 stepper driver, the printed circuit board in 3D

    L0 stepper driver

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    18 parts546MIT
  • 2 layersMooltipass, the printed circuit board in 3D

    Mooltipass

    limpkin/mooltipass

    Github repository dedicated to the mooltipass project

    18 parts531
  • 2 layers42.5 × 28.8 mmC5VRX JACK DIY V2, the printed circuit board in 3D

    C5VRX JACK DIY V2

    Twotoz/C5VRX

    Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS

    18 parts515GPL-3.0

Questions

How big is the Enoki PCB?

It measures 40 × 23 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Enoki use?

18 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Enoki KiCad files?

From the roryjamesallen/Enoki-Allen-Synthesis repository on GitHub, at the commit this page was made from: the board is kicad/Enoki.kicad_pcb and its schematic enoki-1u-panel/enoki-1u-panel.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Enoki design in my own project?

Its repository states no licence, so its author keeps all rights: ask roryjamesallen before reusing the design.