Skip to the content
2 layers56.9 × 54.2 mmRDC1-0009 H, the printed circuit board in 3D

Это цифровое, светодиодное сердце будет отличным подарком девушке ко Дню Влюбленных, 8 Марта, или на День рождения. 21 светодиод расположены по периметру печатной платы в виде сердца.

Size
56.9 × 54.2 mm
Copper layers
2
Thickness
1.6 mm
Parts
62
Nets
58
Pads
165
Tracks, vias
455, 58
Pours
2
Routed
Yes
KiCad
KiCad 4
Created
30 Apr 2018
Updated
30 Apr 2018

Overview

RDC1-0009 H is an open-source printed circuit board by romansavrulin, from the romansavrulin/DigitalHeart repository on GitHub. It is a 2-layer board of 56.9 × 54.2 mm with 62 parts on 58 nets, routed with 455 tracks and 58 vias.

It is built around the ATMEGA328P-AU and BSS138. Its parts include 25 resistors, 22 diodes, 3 capacitors, 2 connectors and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

2

README

Readme.md

RDC1-0009, Цифровое сердце

Это цифровое, светодиодное сердце будет отличным подарком девушке ко Дню Влюбленных, 8 Марта, или на День рождения. 21 светодиод расположены по периметру печатной платы в виде сердца. Все они управляются микроконтроллером ATmega328. В демонстрационном скетче прописаны несколько эффектов оживляющих сердце. Скетч загружается с помощью любого контроллера Arduino. Но главная изюминка это вибромоторчик от смартфона расположенный на тыльной стороне. Он создает эффект бьющегося в такт световым эффектам сердца. Скетч легко изменить, если вы придумаете новые световые эффекты и частоту стука сердца. На тыльной стороне сердца есть зарядное устройство для Li-ion аккумуляторов, которое будет подзаряжать ваше сердце через порт Mini USB. Схема зарядного устройства собрана на микросхеме MCP73831T. Схема включения стандартная из описания на микросхему. Все детали проекта открыты для свободного использования. Проект созданный в KiCAD можно скачать в приложении. Программу скачивайте в разделе «Скетч – код программы».

Внешний вид устройства

TOP

BOTTOM

Технические параметры

Размер - 50 х 50 мм. Источник питания – Li-Ion или Li-Pol аккумулятор 3,7В

Programmer wiring

Nano pinsNANO ISP PINNano netTarget NetTarget Pin
D121MOSIMISO1
5V25V5V2
D133SCKSCK3
D114MISOMOSI4
D10N/A, USE D10TARGET_RSTRST5
GND6GNDGND6

Troubleshooting

If you get slow effects, it's wrong FUSE configuration. Try to run

text
"C:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avrdude" "-CC:\Program Files (x86)\Arduino\hardware\tools\avr/etc/avrdude.conf" -v -patmega168p -cstk500v1 -PCOM4 -b19200 -U lfuse:w:0xE2:m

from console

Parts

62
QtyValueFootprintReferences
24RR_0805_HandSolderingR1, R2, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23 +8
22LEDLEDs:LED_0805D1, D2, D3, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22 +6
3CCapacitors_SMD:C_0805_HandSolderingC1, C2, C3
1ATMEGA328P-AHousings_QFP:LQFP-32_7x7mm_Pitch0.8mmIC1
1BSS138SOT-23Q1
1CONN_02X03NewComponents:Pin_Header_Straight_2x03_mmP2
1GIC_MCP73831NewComponents:SOT-23-5_mmDA1
1LOGONewComponents:Logo_silk_OSHW_12x13mmG***
1LOGOSymbols:hert1G***
1LOGONewComponents:LOGO_chipdipG***
1Li-Pol 3,7VNewComponents:Pin_Header_Straight_1x02_mmBT1
1RResistors_SMD:R_0805_HandSolderingR5
1SPSTSWITCH_RELAY:SWITCH-mmp122-rSW1
1USB_OTGNewComponents:USB_Mini-B_mmP1
1V.MOTORConnect:PINHEAD1-2M1

The 61 most common of 62 parts.

Similar boards

  • 2 layers73 × 94 mmSportiduino base, the printed circuit board in 3D

    Sportiduino base

    sportiduino/sportiduino

    Electronic timing system for orienteering and similar outdoor sports events on Arduino

    119 parts78GPL-3.0
  • 2 layers58.9 × 44.2 mmOpenPSX2AmigaPadAdapter, the printed circuit board in 3D

    OpenPSX2AmigaPadAdapter

    SukkoPera/OpenPSX2AmigaPadAdapter

    Playstation to Commodore Amiga/CD32 Controller Adapter

    43 parts69
  • 2 layers50 × 41.6 mmNunchuk64, the printed circuit board in 3D

    Nunchuk64

    djtulan/nunchuk64

    A Nintendo (Nunchuk) Controller Adapter for Commodore 64.

    42 parts62GPL-3.0
  • 2 layers30.5 × 63 mmAdbuino, the printed circuit board in 3D

    Adbuino

    akuker/adbuino

    Arduino-based USB keyboard and Mouse to ADB adapter. Allows USB keyboards and mice to be used with vintage Macintosh computers.

    75 parts60
  • 2 layers48.3 × 26.7 mmHob2ikeahood, the printed circuit board in 3D

    Hob2ikeahood

    maximevince/hob2ikeahood

    AEG hob2hood support for Ikea Underverk Hoods

    31 parts30GPL-3.0
  • 4 layers78 × 78 mmBEEIRON v0.0, the printed circuit board in 3D

    BEEIRON v0.0

    Krishnawa/BEEIRON

    A JBC soldering station

    136 parts7CC0-1.0
  • 2 layers137.2 × 83.8 mmGeneralPurposeAlarmDevicePCB, the printed circuit board in 3D

    GeneralPurposeAlarmDevicePCB

    PubInv/general-purpose-alarm-device

    A general purpose alarm device (with software) as a module for medical devices (and others)

    140 parts7AGPL-3.0
  • 2 layers98.8 × 55.1 mmH bridge controller, the printed circuit board in 3D

    H bridge controller

    jayanta525/dual-h-bridge

    Dual H-Bridge Controller with IRF3205 and IR2104 MOSFET Driver, and with ATMega328P-AU PWM Controller

    104 parts5MIT

Questions

How big is the RDC1-0009 H PCB?

It measures 56.9 × 54.2 mm and has 2 copper layers, 1.6 mm thick.

What parts does the RDC1-0009 H use?

62 parts, built around the ATMEGA328P-AU and BSS138. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the RDC1-0009 H KiCad files?

From the romansavrulin/DigitalHeart repository on GitHub, at the commit this page was made from: the board is PCB/KiCAD/RDC1-0009 H.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the RDC1-0009 H design in my own project?

Its repository states no licence, so its author keeps all rights: ask romansavrulin before reusing the design.