2 layers139.7 × 73.7 mm
2 layers64.5 × 85.5 mm
Osiris electronics components. KiCAD projects, shared components, PCB releases.
- Size
- 64.5 × 85.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 40
- Nets
- 57
- Pads
- 172
- Tracks, vias
- 244, 11
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 16 Jul 2026
- Updated
- 5 Oct 2026
Overview
SET AV is an open-source printed circuit board by rocketproplab, from the rocketproplab/osiris-hardware repository on GitHub. It is a 2-layer board of 64.5 × 85.5 mm with 40 parts on 57 nets, routed with 244 tracks and 11 vias.
Its parts include 14 connectors, 10 resistors and 9 capacitors. It belongs with the ESP32 and RISC-V boards of this library.
Parts
40| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100nF | Capacitor_SMD:C_0603_1608Metric | C2, C3, C4, C6, C8 |
| 3 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R4, R7 |
| 3 | 47uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C1, C5, C7 |
| 2 | 3.6k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R8 |
| 2 | 4.7k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R9 |
| 1 | 100uF | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C9 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10 |
| 1 | 2.7k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | 6.8k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | AP63203 Buck (socket) | rpl:SparkFun_BabyBuck_AP63203 | J2 |
| 1 | Adafruit PA1616D JST-XH header (male) | Connector_JST:JST_XH_B6B-XH-A_1x06_P2.50mm_Vertical | J6 |
| 1 | BMP388 (socket) | rpl:Adafruit_BMP388 | J3 |
| 1 | BR recovery signal | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J7 |
| 1 | BR staging signal | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J8 |
| 1 | Battery | rpl:battery_pads | BT1 |
| 1 | Battery Debug | rpl:PinHeader_1x03_P2.54mm_Vertical | J13 |
| 1 | ESP32P4ETH (socket) | rpl:Waveshare_ESP32-P4-ETH | J1 |
| 1 | GPS Debug | rpl:6-pin-debug | J14 |
| 1 | LSM6DSOX (socket) | rpl:Adafruit_LSM6DSOX | J4 |
| 1 | RPL_Logo_26mm | rpl:RPL_Logo_26mm | G*** |
| 1 | RPL_Logo_NoSubtitle_15mm | rpl:RPL_Logo_NoSubtitle_15mm | G*** |
| 1 | Recovery Debug | rpl:PinHeader_1x03_P2.54mm_Vertical | J11 |
| 1 | Sensor Debug | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J10 |
| 1 | Staging Debug | rpl:PinHeader_1x03_P2.54mm_Vertical | J12 |
| 1 | XBee Debug | rpl:6-pin-debug | J9 |
| 1 | XBee PRO S3B (socket) | rpl:SparkFun_XBee_PRO_S3B_USB | J5 |
The 36 most common of 40 parts.
Questions
How big is the SET AV PCB?
It measures 64.5 × 85.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the SET AV use?
40 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SET AV KiCad files?
From the rocketproplab/osiris-hardware repository on GitHub, at the commit this page was made from: the board is boards/SET-1-Osiris-Avionics/SET_AV.kicad_pcb and its schematic boards/SET-1-Osiris-Avionics/SET_AV.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the SET AV design in my own project?
Its repository states no licence, so its author keeps all rights: ask rocketproplab before reusing the design.
Similar boards
- 2 layers149.4 × 177.4 mm
Lightsculpture
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
40 parts915 - 2 layers150 × 50 mm
EleLab v2 Bus150
Chrismettal/EleLab_v2
Cheap DIY lab system for hobbyists and the tinkering folk
40 parts531GPL-3.0 - 2 layers66.4 × 48.1 mm
Raspberry
Chrismettal/flipper-zero-backpacks
Backpack-style addon boards for the Flipper Zero!
40 parts456 - 2 layers44 × 44 mm
- 2 layers90.8 × 53.3 mm
- 2 layers59.6 × 109.5 mm
Drop
ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust
40 parts410 - 2 layers123.8 × 73.5 mm
