4 layers24.5 × 14 mm
4 layers65.5 × 36.1 mm
Roboy sno
Roboy/roboy_sno1Altera 10M16SAU169C8G custom fpga board with esp8266-e12
- Size
- 65.5 × 36.1 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 58
- Nets
- 134
- Pads
- 543
- Tracks, vias
- 1,789, 306
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 20 Mar 2018
- Updated
- 12 Aug 2018
Overview
Roboy sno is an open-source printed circuit board by Roboy, from the Roboy/roboy_sno repository on GitHub, published under the BSD-3-Clause licence. It is a 4-layer board of 65.5 × 36.1 mm with 58 parts on 134 nets, routed with 1,789 tracks and 306 vias.
It is built around the 10M16SAU169C8G, DSC6083CE2A-032K768 and FT231XQ-T, with the BNO055 and LD39200PUR among its other parts. Its parts include 24 resistors, 10 capacitors, 7 ICs, 7 connectors and 5 diodes. It belongs with the ESP8266 and FPGA and CPLD boards of this library.
Main components
5
10M16SAU169C8G
UBGA-1690℃~+85℃ 1000 130 16000 2.85V~3.465V 562176bit MAX 10 Supports hot swap、Integrated temperature sensor UBGA-169 Programmable Logic Device (CPLDs/FPGAs) ROHSIntel/AlteraProgrammable Logic Device (CPLDs/FPGAs)
DSC6083CE2A-032K768
SMD3225-4PSMD3225-4P Programmable Oscillators ROHSMicrochip TechnologyPre-Ordered MCUs
FT231XQ-T
QFN-20-EP(4x4)-40℃~+85℃ 125uA 3.3V~5V 8mA USB 2.0 USB to UART QFN-20-EP(4x4) USB Converters ROHSFTDIUSB Converters
BNO055
LGA-28(3.8x5.2)-40℃~+85℃ 2.4V~3.6V 40uA I2C、UART IMU X,Y,Z X,Y,Z ±16g ±2000dps LGA-28(3.8x5.2) Accelerometers ROHSBosch SensortecAccelerometers
LD39200PUR
DFN-6(3x3)-40℃~+125℃@(Tj) 1 24uVrms 250mV@(2A) 2A 300uA 500mV~5.75V 6V 70dB@(1kHz) Adjustable PG Pin、Over Current Protection、Reverse connection protection、Thermal Shutdown Positive DFN-6(3x3) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSSTMicroelectronicsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.md
Parts
58| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | 10k | Resistor_SMD:R_0402_1005Metric | R2, R4, R5, R6, R7, R8, R9, R15, R16, R17, R18, R19, R20, R23, R24 |
| 7 | 1k | Resistor_SMD:R_0402_1005Metric | R1, R3, R10, R11, R12, R13, R14 |
| 4 | Conn_02x20_Odd_Even_MountingPin | Connector_FFC-FPC:Hirose_FH12-40S-0.5SH_1x40-1MP_P0.50mm_Horizontal | J1, J2, J3, J6 |
| 4 | LED | LED_SMD:LED_0603_1608Metric | D1, D2, D3, D4 |
| 3 | 100n | Capacitor_SMD:C_0402_1005Metric | C1, C6, C8 |
| 2 | 10uF | Capacitor_SMD:C_0402_1005Metric | C2, C3 |
| 2 | 27 | Resistor_SMD:R_0402_1005Metric | R21, R22 |
| 2 | 47pF | Capacitor_SMD:C_0402_1005Metric | C4, C7 |
| 2 | SW_Push | Button_Switch_SMD:SW_SPST_B3U-1000P | SW1, SW2 |
| 1 | 10M16SAU169C8G | BGA169CP80_13X13_1100X1100X95B40N:BGA169CP80_13X13_1100X1100X95B40N | U3 |
| 1 | 10n | Capacitor_SMD:C_0402_1005Metric | C5 |
| 1 | 120n | Capacitor_SMD:C_0402_1005Metric | C10 |
| 1 | 6.8n | Capacitor_SMD:C_0402_1005Metric | C9 |
| 1 | BNO055 | Package_LGA:LGA-28_5.2x3.8mm_P0.5mm | U7 |
| 1 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | Conn_02x05_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x05_P2.54mm_Vertical | J4 |
| 1 | DSC6083CE2A-032K768 | Oscillator:Oscillator_SMD_Abracon_ASE-4Pin_3.2x2.5mm | U2 |
| 1 | D_Schottky | Diode_SMD:D_SOD-123F | D5 |
| 1 | ESP8266-ESP-12E | roboy_sno:ESP-12E_SMD | U4 |
| 1 | FT231XQ-T | Housings_DFN_QFN:QFN-20-1EP_4x4mm_Pitch0.5mm | U5 |
| 1 | Ferrite_Bead | Inductor_SMD:L_0402_1005Metric | L1 |
| 1 | G*** | custom_lib:Roboy_big(4cm)_without_circle | svg2mod |
| 1 | LD39200 | Housings_DFN_QFN:DFN-6-1EP_3x3mm_Pitch0.95mm | U1 |
| 1 | Q_DUAL_NPN_NPN_E1B1C2E2B2C1 | Package_TO_SOT_SMD:SOT-363_SC-70-6 | Q1 |
| 1 | USB_B_Mini | Connector_USB:USB_Micro-B_Molex_47346-0001 | J7 |
| 1 | custom:Simic_Infineon | custom_lib:IM69D130_Simic_uPhone | U6 |
Questions
How big is the Roboy sno PCB?
It measures 65.5 × 36.1 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Roboy sno use?
58 parts, built around the 10M16SAU169C8G, DSC6083CE2A-032K768, FT231XQ-T and BNO055. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Roboy sno KiCad files?
From the Roboy/roboy_sno repository on GitHub, at the commit this page was made from: the board is roboy_sno.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Roboy sno design in my own project?
Its repository publishes it under the BSD-3-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers31.8 × 56 mm
- 4 layers122.8 × 102.7 mm
- 4 layers65 × 56 mm
- 2 layers26.2 × 53.1 mm
- 2 layers92.5 × 100 mm
- 4 layers99.9 × 50.7 mm
- 4 layers127 × 114.3 mm
