2 layers70 × 90 mm
2 layers70 × 50 mm
Capteur IR
robotronik/conferences2Dépôt avec les fichiers pour les conférences Phelma :
- Size
- 70 × 50 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 23
- Nets
- 13
- Pads
- 63
- Tracks, vias
- 112, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 11 May 2019
- Updated
- 22 Oct 2021
Overview
Capteur IR is an open-source printed circuit board by robotronik, from the robotronik/conferences repository on GitHub. It is a 2-layer board of 70 × 50 mm with 23 parts on 13 nets, routed with 112 tracks and 0 vias.
It is built around the LM324 and NE555. Its parts include 8 resistors, 6 capacitors, 2 ICs, 2 connectors and 1 diode.
Main components
2
LM324
SOP-14-1.5V~10V 0℃~+70℃ 24V 250nA 3V~20V 4 40mA 50nA 700uA 7mV 80dB SOP-14 Operational Amplifier ROHSHXY MOSFETOperational Amplifier
NE555
SOP-8-20℃~+70℃ 1 1.5mA 200mA 4.5V~15V Adjustable duty cycle oscillation、Reset function、Duty cycle stabilization SOP-8 555 Timers / Counters ROHSGRTimers / Counters
README
README.mdConférences
Dépôt avec les fichiers pour les conférences Phelma :
stm32 [blocked] lien à faire
Parts
23| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H1, H2, H3, H4 |
| 2 | 10n | Capacitor_THT:C_Rect_L7.0mm_W2.5mm_P5.00mm | C1, C6 |
| 2 | 1u | Capacitor_THT:C_Rect_L7.0mm_W2.5mm_P5.00mm | C3, C5 |
| 2 | 33k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R6, R7 |
| 1 | 100n | Capacitor_THT:C_Rect_L7.0mm_W2.5mm_P5.00mm | C2 |
| 1 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5 |
| 1 | 1n | Capacitor_THT:C_Rect_L7.0mm_W2.5mm_P5.00mm | C4 |
| 1 | 2.7k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 1 | 39k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R8 |
| 1 | 510 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4 |
| 1 | 6.8k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | 82 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | Conn_01x03_Male | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | Conn_01x04_Male | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | D | Diode_THT:D_A-405_P10.16mm_Horizontal | D1 |
| 1 | LM324 | Package_DIP:DIP-14_W7.62mm_Socket | U2 |
| 1 | NE555 | Package_DIP:DIP-8_W7.62mm | U1 |
Questions
How big is the Capteur IR PCB?
It measures 70 × 50 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Capteur IR use?
23 parts, built around the LM324 and NE555. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Capteur IR KiCad files?
From the robotronik/conferences repository on GitHub, at the commit this page was made from: the board is ConcElec_2019/kicad/capteur_IR/capteur_IR.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Capteur IR design in my own project?
Its repository states no licence, so its author keeps all rights: ask robotronik before reusing the design.
Similar boards
- 4 layers180.3 × 114.9 mm
- 2 layers297.2 × 180.3 mm
- 2 layers203.2 × 149.9 mm
- 2 layers
LM80C R6
leomil72/LM80C
A Z80-based homebrew computer withTMS9918, AY-3-8910, Z80 CTC, Z80 PIO, and Z80 SIO
153 parts123GPL-3.0 - 2 layers249.9 × 89.4 mm
CSCvon8
DoctorWkt/CSCvon8
A crazy small 8-bit CPU built with only seventeen 7400-series chips.
55 parts112GPL-3.0 - 2 layers160.1 × 101 mm
PLC-14500
nicolacimmino/PLC-14500
Retro trainer board based on the MC14500 1-bit ICU. The project is OSHW certified and a ready to assemble kit is available on Tindie.
173 parts70GPL-3.0 - 2 layers63 × 46 mm
Pi485
bvarner/pi485
An open-source TTL UART <-> RS485 converter, intended for a Raspberry Pi or Arduino
31 parts41MIT