

Carte 1A cdfr2018
regroupe tous les fichiers freecad du robot 1A pour la cdfr
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 65
- Nets
- 115
- Pads
- 280
- Tracks, vias
- 626, 81
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 16 Nov 2017
- Updated
- 10 Oct 2018
Overview
Carte 1A cdfr2018 is an open-source printed circuit board by robotronik, from the robotronik/cdfr-2018-1A repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board with 65 parts on 115 nets, routed with 626 tracks and 81 vias.
It is built around the SN74LS126AN, MC34152D and IRF540N, with the SN74HC04N among its other parts. Its parts include 21 connectors, 14 ICs, 11 diodes, 6 resistors and 4 capacitors.
Main components
4SN74LS126AN
PDIP-140℃~+70℃ 1 2.6mA 24mA 4 4.75V~5.25V 74LS Tri-State Unidirectional PDIP-14 Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, TransceiversMC34152D
SOIC-8-40℃~+70℃ 1.5A 1.5A 1.75V~2.6V 14ns 15ns 2 40ns 55ns 6.1V~18V 6mA 800mV~1.58V MOSFET Under Voltage Protection SOIC-8 Gate Drivers ROHSonsemiGate DriversIRF540N
TO-2201 N-channel 1.35nF 100V 130W 280pF 33A 35mΩ@10V 4V 52nC@10V 85pF N-Channel TO-220 MOSFETs ROHSOSENMOSFETsSN74HC04N
DIP-14InvertersTexas Instruments
README
README.mdcdfr-2018-1A
Ceci est le readme du groupe phelma 1A cdfr
DESCRIPTION DES DOSSIERS :
_Mecanique
regroupe tous les fichiers freecad du robot 1A pour la cdfr_TestFreeCad
regroupe tous les fichiers freecad "experimentaux"_ELectronique
regroupe tout les kicads pour le design des cartes
_Programation
mxcube projet des test et gestion des actionneurs et capteursNB:
Commit : ont pour but de rendre compte de la version du projet == nom avec du sens
Dossiers : (à venir) _Electronique _Programmation
Parts
65| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | trou-d3mm | robot_1A:trou_d3mm | U2, U3, U4, U5, U22, U23, U24, U25 |
| 6 | D | Diodes_SMD:D_SMA_Handsoldering | D3, D4, D7, D8, D10, D11 |
| 5 | Conn_01x02 | Connectors_Molex:Molex_KK-6410-02_02x2.54mm_Straight | J7, J8, J9, JL1, JL2 |
| 5 | LED | LEDs:LED_D5.0mm | D1, D2, D5, D6, D9 |
| 4 | B_Plug_5mm | dsn2596:B plug 5mm | JL3, JL4, U7, U11 |
| 4 | CP | Capacitors_THT:CP_Radial_D8.0mm_P3.50mm | C1, C2, C3, C4 |
| 4 | ultrason | Connectors_Molex:Molex_KK-6410-04_04x2.54mm_Straight | P3, P4, P5, P6 |
| 3 | CONN_01X01_GND | Measurement_Points:Measurement_Point_Round-TH_Big | J1, J5, J6 |
| 3 | DSN2596 | DSN:DSN2596 | U8, U9, U10 |
| 2 | 1.8k | Resistors_SMD:R_1206_HandSoldering | R3, R5 |
| 1 | 1.2k | Resistors_SMD:R_1206_HandSoldering | R4 |
| 1 | 2.7k | Resistors_SMD:R_1206_HandSoldering | R2 |
| 1 | 680 | Resistors_SMD:R_1206_HandSoldering | R6 |
| 1 | B_Plug_5mm | DSN:B plug 5mm | U6 |
| 1 | CONN_01X01_+5V | Measurement_Points:Measurement_Point_Round-TH_Big | J4 |
| 1 | CONN_01X01_+7V4 | Measurement_Points:Measurement_Point_Round-TH_Big | J3 |
| 1 | CONN_01X01_BATT | Measurement_Points:Measurement_Point_Round-TH_Big | J2 |
| 1 | Conn_01x02 | dsn2596:B plug 5mm | J10 |
| 1 | Encodeur1 | Connectors_Molex:Molex_KK-6410-04_04x2.54mm_Straight | P1 |
| 1 | Encodeur2 | Connectors_Molex:Molex_KK-6410-04_04x2.54mm_Straight | P2 |
| 1 | Fuse | Fuse_Holders_and_Fuses:Fuseholder5x20_horiz_SemiClosed_Casing10x25mm | F6 |
| 1 | IRF540N | Power_Integrations:TO-220 | Q1 |
| 1 | MC34152 | Housings_DIP:DIP-8_W7.62mm_LongPads | U12 |
| 1 | Nucleo-64 | robot_1A:Nucleo-64 | U1 |
| 1 | R | Resistors_SMD:R_1206_HandSoldering | R1 |
| 1 | SN74HC04N | Housings_DIP:DIP-14_W7.62mm_LongPads | N1 |
| 1 | SN74LS126AN | Housings_DIP:DIP-14_W7.62mm_LongPads | T1 |
| 1 | pont_en_H | robot_1A:MC33926-Pont en H | H1 |
| 1 | servo1 | Connectors_Molex:Molex_KK-6410-03_03x2.54mm_Straight | P7 |
| 1 | servo2 | Connectors_Molex:Molex_KK-6410-03_03x2.54mm_Straight | P8 |
| 1 | servo3 | Connectors_Molex:Molex_KK-6410-03_03x2.54mm_Straight | P9 |
Similar boards
- 2 layers100 × 69 mm

- 2 layers175 × 90 mm

- 2 layers45 × 47 mm

- 2 layers149.9 × 111.8 mm

- 4 layers100 × 80 mm

SDC
EggLem0n/Formula-KSAE-NstopO-EH-32
E formula, SAE. This repository contains the LV Electrical Safety System Circuit Design files for the EH-32, developed by NstopO, the student racing team at Chung-Ang University.
45 partsGPL-3.0 - 4 layers207 × 78.7 mm

- 2 layers100.5 × 162.5 mm

OVN
Skab101/OvnProjekt
A fully hardware-based oven control system designed and built with analog + digital electronics only — no microcontroller or pre-programmed ICs. All schematics and PCBs were created in KiCad.
76 parts - 2 layers280 × 170 mm

Questions
What parts does the Carte 1A cdfr2018 use?
65 parts, built around the SN74LS126AN, MC34152D, IRF540N and SN74HC04N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Carte 1A cdfr2018 KiCad files?
From the robotronik/cdfr-2018-1A repository on GitHub, at the commit this page was made from: the board is Electronique/Carte_Principale_Robot/carte_1A_cdfr2018.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Carte 1A cdfr2018 design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).