

Digital Electronic Trainer main pcb
- Size
- 280 × 170 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 348
- Nets
- 223
- Pads
- 730
- Tracks, vias
- 1,331, 3
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 21 Nov 2024
- Updated
- 21 Nov 2024
Overview
Digital Electronic Trainer main pcb is an open-source printed circuit board by WanjiruVivian, from the WanjiruVivian/Digital_Electronic_pcb repository on GitHub. It is a 2-layer board of 280 × 170 mm with 348 parts on 223 nets, routed with 1,331 tracks and 3 vias.
It is built around the SN74LS47N, NE555P and L7805, with the SN7400N, SN7402N and SN7432N among its other parts. Its parts include 217 connectors, 51 resistors, 24 diodes, 17 transistors and 15 ICs.
Main components
11SN74LS47N
DIP-160℃~+70℃ 24mA 35mW 4.75V~5.25V 7 Segment x 1 Digit DIP-16 Digital Tube Drivers ROHSTexas InstrumentsDigital Tube DriversNE555P
DIP-80℃~+70℃ 100kHz 10mA 4.5V~16V DIP-8 555 Timers / Counters ROHSTexas InstrumentsTimers / CountersL7805
TO-220ST0℃~+125℃@(Tj) 1 1.2A 20V 2V@(1A) 42uV 500uA 5V 73dB@(120Hz) Fixed Positive Short Circuit Protection TO-220ST Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSOSENVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsSN7400N
PDIP-140℃~+70℃ 16mA 22ns@5V,15pF 2V 4 4.75V~5.25V 400uA 7400 Series 800mV NAND Gate PDIP-14 Logic Gates ROHSTexas InstrumentsLogic GatesSN7402N
PDIP-140℃~+70℃ 16mA 22ns@5V,15pF 2V 4 4.75V~5.25V 400uA 7400 Series 800mV NOR Gate PDIP-14 Logic Gates ROHSTexas InstrumentsLogic GatesSN7432N
PDIP-140℃~+70℃ 16mA 2 2.4V~3.4V 200mV~400mV 22mA 22ns@5V,15pF 2V 4 4.75V~5.25V 7400 Series 800mV 800uA OR Gate PDIP-14 Logic Gates ROHSTexas InstrumentsLogic GatesSN7486N
PDIP-140℃~+70℃ 14ns 16mA 2 2.4V~3.4V 200mV~400mV 2V 4 4.75V~5.25V 50mA 74 800mV 800uA XOR Gate PDIP-14 Logic GatesTexas InstrumentsLogic GatesSN74HC04N
DIP-14InvertersTexas InstrumentsSN74LS00N
PDIP-140℃~+70℃ 15ns@5V,15pF 2 2.5V 2V 4 4.75V~5.25V 400uA 500mV 74LS Series 800mV 8mA NAND Gate PDIP-14 Logic Gates ROHSTexas InstrumentsLogic GatesBC547
TO-92Bipolar (BJT)Jiangsu Changjing Electronics Technology (CJ)240-1280-00-0602J
-IC / Transistor Socket3M
Parts
348| Qty | Value | Footprint | References |
|---|---|---|---|
| 216 | Conn_01x01_Socket | Connector_PinSocket_2.00mm:PinSocket_1x01_P2.00mm_Vertical | J10, J11, J100, J101, J102, J103, J104, J105, J106, J107, J108, J109, J110, J111, J112, J113 +200 |
| 18 | LED | LED_THT:LED_D5.0mm | D1, D2, D3, D4, D5, D6, D7, D10, D11, D12, D13, D14, D15, D16, D17, D20 +2 |
| 17 | 1kΩ | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P15.24mm_Horizontal | R3, R5, R7, R11, R13, R15, R17, R20, R22, R24, R26, R28, R30, R32, R34, R37 +1 |
| 16 | 330Ω | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P15.24mm_Horizontal | R4, R6, R8, R10, R12, R14, R16, R18, R21, R23, R25, R27, R29, R31, R33, R35 |
| 16 | BC547 | Package_TO_SOT_THT:TO-92_Inline | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q9, Q10, Q11, Q12, Q13, Q14, Q15, Q16 |
| 8 | 330Ω | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P15.24mm_Horizontal | R45, R46, R47, R48, R49, R50, R51, R52 |
| 8 | SW_Nidec_CAS-120A1 | ATE1D-2M3-10-Z:SW_ATE1D-2M3-10-Z | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 |
| 4 | D_Schottky | Diode_THT:D_A-405_P12.70mm_Horizontal | D35, D36, D37, D38 |
| 3 | C | Capacitor_THT:C_Disc_D10.0mm_W2.5mm_P5.00mm | C1, C3, C5 |
| 3 | NE555P | Package_DIP:DIP-8_W7.62mm | U1, U2, U3 |
| 2 | 1KΩ | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P15.24mm_Horizontal | R41, R44 |
| 2 | 44KΩ | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P15.24mm_Horizontal | R42, R43 |
| 2 | 7KΩ | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P15.24mm_Horizontal | R39, R40 |
| 2 | D | Diode_THT:D_DO-34_SOD68_P12.70mm_Horizontal | D33, D34 |
| 2 | J-K F.F | SN74LS47N:DIP794W45P254L1930H508Q16 | J-K_F.F, J-K_F.F |
| 2 | R_Potentiometer | Potentiometer_THT:Potentiometer_Alps_RK09K_Single_Vertical | RV1, RV2 |
| 1 | 0.7kΩ | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P15.24mm_Horizontal | R38 |
| 1 | 0.9K | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P15.24mm_Horizontal | R1 |
| 1 | 1.5KΩ | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P15.24mm_Horizontal | R36 |
| 1 | 1000uF | Capacitor_THT:C_Radial_D12.5mm_H25.0mm_P5.00mm | C7 |
| 1 | 100uF | Capacitor_THT:C_Radial_D10.0mm_H16.0mm_P5.00mm | C4 |
| 1 | 1uF | Capacitor_THT:C_Radial_D5.0mm_H11.0mm_P2.00mm | C8 |
| 1 | 240-1280-00-0602J | 40 pin:3M_240-1280-00-0602J | J1 |
| 1 | 330 | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P15.24mm_Horizontal | R2 |
| 1 | 33uF | Capacitor_THT:C_Radial_D10.0mm_H16.0mm_P5.00mm | C2 |
| 1 | 47uF | Capacitor_THT:C_Radial_D10.0mm_H16.0mm_P5.00mm | C6 |
| 1 | 74LS90 | SN74LS90N:DIP254P762X508-14 | IC6-7490 |
| 1 | 74LS95 | SN74LS595N:DIP794W45P254L1969H508Q16 | IC7-7495 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_D14mm_H7mm_P10mm | BZ1 |
| 1 | KCSA02-107 | Display_7Segment:KCSC02-107 | U17 |
| 1 | L7805 | L7805CV:TO255P1040X460X1968-3 | U4 |
| 1 | LOGO | Pixelengineering.preety:logo | G*** |
| 1 | NPN | 2N4013:TO18 | Q17 |
| 1 | SN7400N | SN7400N:DIP794W45P254L1969H508Q14 | IC1-7400 |
| 1 | SN7402 | SN7400N:DIP794W45P254L1969H508Q14 | IC2-7402 |
| 1 | SN7408 | SN7400N:DIP794W45P254L1969H508Q14 | IC3-7408 |
| 1 | SN7432N | SN7432N:DIP794W45P254L1969H508Q14 | IC4-7432 |
| 1 | SN7486 | SN7400N:DIP794W45P254L1969H508Q14 | IC8-7486 |
| 1 | SN74HC04N | SN74HC04N:DIP794W45P254L1969H508Q14 | IC5-7404 |
| 1 | SN74LS00N | SN74LS00N:DIP794W45P254L1969H508Q14 | U11 |
| 1 | SN74LS47N | SN74LS47N:DIP794W45P254L1930H508Q16 | U14 |
| 1 | SW_Push_Open_Dual | Button_Switch_THT:SW_Push_2P1T_Toggle_CK_PVA1xxH2xxxxxxV2 | SW14 |
| 1 | SW_Push_Open_Dual | Button_Switch_THT:Push_E-Switch_KS01Q01 | SW16 |
Similar boards
- 2 layers177.8 × 200.9 mm

- 2 layers715.5 × 705.5 mm

Frontpanel
Pconst167/sol-1
Sol-1 is a homebrew CPU and Minicomputer built from 74HC logic. It is published here for educational purposes.
299 parts1 - 2 layers76.4 × 80.1 mm

- 2 layers105.5 × 99.6 mm

- 2 layers127 × 69.9 mm

Ezcgi
baldengineer/bit-preserve
Project for capturing vintage, classic, aka old computer schematics in KiCad.
34 parts446 - 2 layers169.1 × 191 mm

Entrex Trapezoid Interface Board v23
ForgottenMachines/Entrex
The technologies documented here will include all like-kind systems manufactured by Nixdorf, Redifon, ROCC & Mera, all originally designed by Entrex Inc, Burlington, MA USA.
101 parts1 - 2 layers45 × 47 mm

- 2 layers149.9 × 111.8 mm

Questions
How big is the Digital Electronic Trainer main pcb PCB?
It measures 280 × 170 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Digital Electronic Trainer main pcb use?
348 parts, built around the SN74LS47N, NE555P, L7805 and SN7400N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Digital Electronic Trainer main pcb KiCad files?
From the WanjiruVivian/Digital_Electronic_pcb repository on GitHub, at the commit this page was made from: the board is Digital Electronic Trainer main pcb.kicad_pcb and its schematic Digital_Electronic_Trainer.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Digital Electronic Trainer main pcb design in my own project?
Its repository states no licence, so its author keeps all rights: ask WanjiruVivian before reusing the design.