Skip to the content
1234567891011121314

SN74HC04N

Texas InstrumentsExtended

Part id
ti/SN74HC04N
Category
Inverters
Package
DIP-14
Pins
14
In stock
533 at JLCPCB (C2886)
Used on
8 open-source boards

Overview

The SN74HC04N is an inverter made by Texas Instruments in a DIP-14 package with 14 pins.

PCBKit's library has its KiCad symbol (74xx:74HC04, from KiCad's library) and its footprint (Package_DIP:DIP-14_W8.89mm_SMDSocket_LongPads, from KiCad's library), ready for a KiCad board. 533 are in stock at JLCPCB (part C2886). 8 open-source boards in 7 repositories on GitHub use it.

Symbol

12
74xx:74HC04From KiCad's library

Footprint

1234567891011121314
Package_DIP:DIP-14_W8.89mm_SMDSocket_LongPadsFrom KiCad's library

Pinout

14
The pins of the SN74HC04N
PinNameType
1—Input
2—Output
3—Input
4—Output
5—Input
6—Output
7GNDPower in
8—Output
9—Input
10—Output
11—Input
12—Output
13—Input
14VCCPower in

Open-source boards using it

8
  • 2 layers45 × 47 mmATXtoX68000, the printed circuit board in 3D

    ATXtoX68000

    creekpld/ATXtoX68000

    Adapter to use a ATX PSU on your Sharp x68000

    9 parts1MIT
  • 2 layers149.9 × 111.8 mmBc80, the printed circuit board in 3D

    Bc80

    isolenta/bc80

    Homebrew 8-bit computer project

    63 parts1
  • 2 layersCarte 1A cdfr2018, the printed circuit board in 3D

    Carte 1A cdfr2018

    robotronik/cdfr-2018-1A

    regroupe tous les fichiers freecad du robot 1A pour la cdfr

    65 parts1GPL-3.0
  • 4 layers100 × 80 mmSDC, the printed circuit board in 3D

    SDC

    EggLem0n/Formula-KSAE-NstopO-EH-32

    E formula, SAE. This repository contains the LV Electrical Safety System Circuit Design files for the EH-32, developed by NstopO, the student racing team at Chung-Ang University.

    45 partsGPL-3.0
  • 4 layers207 × 78.7 mmRpihw, the printed circuit board in 3D

    Rpihw

    quorten/rpihw

    Raspberry Pi SPI devices board design

    101 partsUnlicense
  • 2 layers100.5 × 162.5 mmOVN, the printed circuit board in 3D

    OVN

    Skab101/OvnProjekt

    A fully hardware-based oven control system designed and built with analog + digital electronics only — no microcontroller or pre-programmed ICs. All schematics and PCBs were created in KiCad.

    76 parts
  • 2 layers103 × 112.5 mmDigital stryring v2 local, the printed circuit board in 3D

    Digital stryring v2 local

    Skab101/OvnProjekt

    A fully hardware-based oven control system designed and built with analog + digital electronics only — no microcontroller or pre-programmed ICs. All schematics and PCBs were created in KiCad.

    27 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the SN74HC04N?

Yes. The symbol is 74xx:74HC04 and the footprint Package_DIP:DIP-14_W8.89mm_SMDSocket_LongPads, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the SN74HC04N?

DIP-14, with 14 pins. Its footprint is drawn on this page.

Where is the SN74HC04N datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the SN74HC04N?

JLCPCB lists it as part C2886, with 533 in stock; the sellers' links on this page open their listings.

What can replace the SN74HC04N?

Parts like it in the library: the TC4584BP(N,F) by Toshiba, the XD14069 by XINLUDA, the XD4069 by XINLUDA and the CD4007UBN by HGSEMI. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the SN74HC04N?

8 boards in 7 repositories on GitHub; the most starred are listed on this page, with their KiCad files.