2 layers65 × 56 mm
2 layers123 × 77 mm
Power board for "Coupe de France de Robotique" 2017
- Size
- 123 × 77 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 23
- Nets
- 20
- Pads
- 134
- Tracks, vias
- 153, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 24 May 2017
- Updated
- 24 May 2017
Overview
Alim is an open-source printed circuit board by RobotikUTT, from the RobotikUTT/alim-2017 repository on GitHub. It is a 2-layer board of 123 × 77 mm with 23 parts on 20 nets, routed with 153 tracks and 0 vias.
It is built around the OKX-T/10-D12N-C and IDH06SG60C. Its parts include 6 connectors, 4 resistors, 2 ICs, 2 diodes and 2 fuses.
Main components
2Parts
23| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 1.472k | Resistors_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P15.24mm_Horizontal | R1, R2 |
| 2 | 10A | Fuse_Holders_and_Fuses:Fuseholder5x20_horiz_open_Schurter_0031_8201 | F1, F2 |
| 2 | 10k | Resistors_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P15.24mm_Horizontal | R3, R4 |
| 2 | IDH06SG60C | alim_robot:TO-220-2 | D1, D2 |
| 2 | OKX-T/10-D12 | alim_robot:Murata_OKX-T10-D12N-C | U1, U2 |
| 2 | TEN50 | alim_robot:Traco_TEN50_Molex | CC1, CC2 |
| 1 | AU | Connectors:bornier4 | J6 |
| 1 | BATT | Connectors_Molex:Molex_MiniFit-JR-5556-02A_2x01x4.20mm_Straight | J1 |
| 1 | Out12L | Connectors:bornier4 | J3 |
| 1 | Out12R | Connectors:bornier4 | J4 |
| 1 | Out5L | Connectors:bornier4 | J5 |
| 1 | Out5P | Connectors:bornier4 | J2 |
The 18 most common of 23 parts.
Questions
How big is the Alim PCB?
It measures 123 × 77 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Alim use?
23 parts, built around the OKX-T/10-D12N-C and IDH06SG60C. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Alim KiCad files?
From the RobotikUTT/alim-2017 repository on GitHub, at the commit this page was made from: the board is alim.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Alim design in my own project?
Its repository states no licence, so its author keeps all rights: ask RobotikUTT before reusing the design.
Similar boards
- 2 layers14 × 100 mm
Yunomi
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
23 parts3kApache-2.0 - 2 layers50.8 × 52.2 mm
- 2 layers138.8 × 89.8 mm
- 2 layers32.9 × 53.3 mm
- 2 layers35.5 × 50 mm
- 2 layers19 × 19 mm
- 2 layers88.5 × 28 mm
ExpBreakout
Duet3D/Duet-2-Hardware
The KiCAD source for the Duet 3d printer controller see www.duet3d.com
23 parts258