
LPC176x MultiFunction
RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading
PocketBeagleQuadOCDect is an open-source printed circuit board by RobertPHeller, from the RobertPHeller/RPi-RRCircuits repository on GitHub. It is a 2-layer board of 114.3 × 115.6 mm with 46 parts on 38 nets, routed with 262 tracks and 27 vias.
It is built around the LM2574N-5.0, MCT6H and RJ45, with the SB240-E3 and SB160-E3/54 among its other parts. Its parts include 10 resistors, 7 ICs, 7 diodes, 5 capacitors and 5 connectors. It belongs with the ESP32 boards of this library.
This is a SMD variant of 16DriverOutputHAT.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10 Ohms | R1 | R3, R5, R7, R9 |
| 4 | 10K Ohms | R1 | R4, R6, R8, R10 |
| 4 | BRIDGEX | KBL | D4, D5, D6, D7 |
| 4 | MCT6H | DIP-8__300 | IC1, IC2, IC3, IC4 |
| 4 | MountingHole_2-5mm_RevA_Date21Jun2010 | MountingHole_2-5mm_RevA_Date21Jun2010 | MH, MH, MH, MH |
| 2 | 60 Ohms | R1 | R1, R2 |
| 2 | RJ45 | RJ45_8N-S | J1, J2 |
| 2 | SB240E | DO-35 | D1, D2 |
| 1 | + 15 in - | ScrewTerm2.54-2 | T1 |
| 1 | + 15 out - | ScrewTerm2.54-2 | T2 |
| 1 | .1 uf | C1 | C1 |
| 1 | 15 uf, 15V | C1V5 | C2 |
| 1 | 22 uf 100V | C1-3V8 | C5 |
| 1 | 220 uf 25V | C1-3V8 | C4 |
| 1 | 330 uh | PE-LowProfile | L1 |
| 1 | 47 nf | C1 | C3 |
| 1 | Console | PIN_ARRAY-6X1 | P101 |
| 1 | In Track1 Out | mors_2p | T3 |
| 1 | In Track2 Out | mors_2p | T4 |
| 1 | In Track3 Out | mors_2p | T5 |
| 1 | In Track4 Out | mors_2p | T6 |
| 1 | LM2574N-5.0 | DIP-8__300 | U3 |
| 1 | POCKETBEAGLE-P1 | pin_socket_18x2 | P1 |
| 1 | POCKETBEAGLE-P2 | pin_socket_18x2 | P2 |
| 1 | SB160-E3/54 | DO-41 | D3 |
| 1 | SN65HVD233-HT | DIP-8__300 | U2 |
| 1 | TCAN332DR | SOIC-8_N | U1 |
| 1 | Termination | PIN_ARRAY_2X2 | JMP1 |

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading


RobertPHeller/2ndGenLocoControlStand
Model 2nd Generation Diesel Locomotive Control Stand


UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported

travisgoodspeed/goodfet
An embedded bus adapter for various microcontrollers and radios.



nv1t/standing-desk-interceptor
I wanted to intercept the communication between my Flexispot standing desk buttons. This is the progress on the project
It measures 114.3 × 115.6 mm and has 2 copper layers, 1.6 mm thick.
46 parts, built around the LM2574N-5.0, MCT6H, RJ45 and SB240-E3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the RobertPHeller/RPi-RRCircuits repository on GitHub, at the commit this page was made from: the board is PocketBeagleQuadOCDect/PocketBeagleQuadOCDect.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask RobertPHeller before reusing the design.