2 layers364.4 × 167.3 mm
2 layers109.2 × 15.2 mm
HeadlightBoard
RobertPHeller/LibraryCoursesLesson notes for courses at the library
- Size
- 109.2 × 15.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 9
- Nets
- 7
- Pads
- 16
- Tracks, vias
- 22, 0
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 3 Feb 2024
- Updated
- 29 Sep 2024
Overview
HeadlightBoard is an open-source printed circuit board by RobertPHeller, from the RobertPHeller/LibraryCourses repository on GitHub, published under the CC-BY-4.0 licence. It is a 2-layer board of 109.2 × 15.2 mm with 9 parts on 7 nets, routed with 22 tracks and 0 vias.
It is built around the TIP120. Its parts include 3 resistors, 2 diodes and 1 transistor.
Main components
1README
README.mdLibrary Courses
These are my course notes for courses I plan on teachibng at the Wendell Free Library.
- Scratch For Kids This is a course for school age kids (4th through 6th grade) teaching computer programming using the Scratch programming environment.
- Sonic Pi For All Ages This is a course teaching Sonic Pi, which is a programming environment for making music. This is an all-ages course.
- Arduino And Robotics For Kids A fun course learning about electronic circuits and robotics.
Parts
9| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 20 .5W | Resistor_SMD:R_1210_3225Metric | R102, R103 |
| 2 | Headlight | DS203:DS203 | D101, D102 |
| 1 | + (Red) | TestPoint:TestPoint_Plated_Hole_D2.0mm | TP102 |
| 1 | - (Black) | TestPoint:TestPoint_Plated_Hole_D2.0mm | TP103 |
| 1 | 1K | Resistor_SMD:R_0805_2012Metric | R101 |
| 1 | Signal (Yellow) | TestPoint:TestPoint_Plated_Hole_D2.0mm | TP101 |
| 1 | TIP120 | Package_TO_SOT_THT:TO-220-3_Vertical | Q101 |
Questions
How big is the HeadlightBoard PCB?
It measures 109.2 × 15.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the HeadlightBoard use?
9 parts, built around the TIP120. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the HeadlightBoard KiCad files?
From the RobertPHeller/LibraryCourses repository on GitHub, at the commit this page was made from: the board is ArduinoAndRoboticsForKids/HeadlightBoard/HeadlightBoard.kicad_pcb and its schematic ArduinoAndRoboticsForKids/HeadlightBoard/HeadlightBoard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the HeadlightBoard design in my own project?
Its repository publishes it under the CC-BY-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers148.8 × 132.2 mm
Usbflashprog
robsonsmartins/usbflashprog
A memory device programmer (Flash/EPROM/E2PROM) board and software, connected to PC by USB port.
125 parts36 - 2 layers489.6 × 170.7 mm
Mission control
dcpedit/mission-control
Modern replacement PCB for the IBM Model M 122
286 parts31CC-BY-4.0 - 2 layers168 × 123 mm
V2 - 2
RudgeLab/FluoPi
Code and teaching materials for UC/BackyardBrains raspberry pi "macro" scope.
131 parts26 - 2 layers
Catozap
jones139/catocam
Uses a custom trained YoloV8 model on a Raspberry Pi to Detect Cats in CCTV images and Unleash a Cat Deterrent
3 parts18GPL-3.0 - 2 layers32.5 × 21.2 mm
Taptap
dcpedit/taptap
TapTap is a solenoid breakout board for those who are interested in adding a solenoid to their existing project. All you need are the following components, and an extra data pin on your microcontroller.
9 parts13CC-BY-4.0 - 2 layers323.8 × 169.8 mm
- 2 layers57.1 × 102.9 mm
Synthwave
alexose/synthwave
An open-source experiment in carbon removal based on the electrochemical pH swing of seawater.
70 parts10CERN-OHL-P-2.0