2 layers364.4 × 167.3 mm
2 layers32.5 × 21.2 mm
Taptap
dcpedit/taptap13TapTap is a solenoid breakout board for those who are interested in adding a solenoid to their existing project. All you need are the following components, and an extra data pin on your microcontroller.
- Size
- 32.5 × 21.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 9
- Nets
- 5
- Pads
- 14
- Tracks, vias
- 12, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 3 Oct 2022
- Updated
- 11 Nov 2024
Overview
Taptap is an open-source printed circuit board by dcpedit, from the dcpedit/taptap repository on GitHub, published under the CC-BY-4.0 licence. It is a 2-layer board of 32.5 × 21.2 mm with 9 parts on 5 nets, routed with 12 tracks and 0 vias.
It is built around the TIP120. Its parts include 2 connectors and 1 resistor.
Main components
1README
README.mdTapTap
TapTap is a solenoid breakout board for those who are interested in adding a solenoid to their existing project. All you need are the following components, and an extra data pin on your microcontroller.
Here's an example of how I used one in a QAZer Beam
And another in my Pillz Mod project
Parts
9| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | MountingHole | MountingHole:MountingHole_2.2mm_M2_Pad | H1, H2 |
| 1 | 1N4001 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | 1N4001 |
| 1 | Conn_01x02_Female | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Conn_01x03_Female | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | LOGO | TapTap:taptap | G*** |
| 1 | R_2.2 | Keebio-Parts:Resistor | R2.2 |
| 1 | TIP120 | Package_TO_SOT_THT:TO-220-3_Vertical | TIP120 |
| 1 | solenoid | redherring:solenoid | Solenoid |
Questions
How big is the Taptap PCB?
It measures 32.5 × 21.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Taptap use?
9 parts, built around the TIP120. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Taptap KiCad files?
From the dcpedit/taptap repository on GitHub, at the commit this page was made from: the board is pcb/TapTap.kicad_pcb and its schematic pcb/TapTap.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Taptap design in my own project?
Its repository publishes it under the CC-BY-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers148.8 × 132.2 mm
Usbflashprog
robsonsmartins/usbflashprog
A memory device programmer (Flash/EPROM/E2PROM) board and software, connected to PC by USB port.
125 parts36 - 2 layers489.6 × 170.7 mm
Mission control
dcpedit/mission-control
Modern replacement PCB for the IBM Model M 122
286 parts31CC-BY-4.0 - 2 layers168 × 123 mm
V2 - 2
RudgeLab/FluoPi
Code and teaching materials for UC/BackyardBrains raspberry pi "macro" scope.
131 parts26 - 2 layers
Catozap
jones139/catocam
Uses a custom trained YoloV8 model on a Raspberry Pi to Detect Cats in CCTV images and Unleash a Cat Deterrent
3 parts18GPL-3.0 - 2 layers323.8 × 169.8 mm
- 2 layers57.1 × 102.9 mm
Synthwave
alexose/synthwave
An open-source experiment in carbon removal based on the electrochemical pH swing of seawater.
70 parts10CERN-OHL-P-2.0 - 2 layers423.3 × 249.2 mm
Ergodonk pico
JellyTitan/ErgoDonk
ErgoDox variant using standard SA keycaps, FDM case, and blackpill MCU
345 parts10MIT