

ESP32-OctalServo
ESP32 based LCC Boards
- Size
- 66 × 91.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 41
- Nets
- 51
- Pads
- 174
- Tracks, vias
- 176, 36
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 28 Dec 2022
- Updated
- 22 Oct 2026
Overview
ESP32-OctalServo is an open-source printed circuit board by RobertPHeller, from the RobertPHeller/ESP32-LCC repository on GitHub. It is a 2-layer board of 66 × 91.4 mm with 41 parts on 51 nets, routed with 176 tracks and 36 vias.
It is built around the ESP32-DEVKITC-VE, AP63205WU and RJ45. Its parts include 11 connectors, 7 capacitors, 4 ICs, 2 resistors and 2 diodes. It belongs with the ESP32 boards of this library.
Main components
3ESP32-DEVKITC-VE
-- WiFi Modules ROHSEspressif SystemsWiFi ModulesAP63205WU
TSOT-23-6-40℃~+85℃@(TA) 1 1.1MHz 22uA 2A 3.8V~32V 5V Buck Built-in Fixed Overcurrent Protection、Light load efficient mode、Cycle-by-cycle current limiting、Hiccup current limiting、EMI optimization (spread spectrum) Step-down type Yes TSOT-23-6 DC-DC Converters ROHSDiodes IncorporatedDC-DC ConvertersRJ45
TH-12PTH-12P SMT ROHSJLCPCB AssemblyUncategorised
README
ESP32-16LedDriver/README.mdESP32-16LedDriver
16 on/off LED Driver board using a MCP23017.
Parts
41| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 22uf | Capacitors_SMD:C_0603 | C403, C404 |
| 2 | 60 Ohms | Resistors_SMD:R_1206 | R301, R302 |
| 2 | DFLS240-7 | Diodes_SMD:D_PowerDI-123 | D301, D302 |
| 2 | RJ45 | RJ45-8N-S:RJ45_8N-S | J301, J302 |
| 1 | DWSLogoBCU:DWSLogoBCU | ||
| 1 | + 5V Servo - | Connectors_Terminal_Blocks:TerminalBlock_Pheonix_PT-3.5mm_2pol | J101 |
| 1 | - 15 in + | Connectors_Terminal_Blocks:TerminalBlock_Pheonix_MPT-2.54mm_2pol | T301 |
| 1 | - 15 out + | Connectors_Terminal_Blocks:TerminalBlock_Pheonix_MPT-2.54mm_2pol | T302 |
| 1 | .1 uf | Capacitors_SMD:C_0603 | C301 |
| 1 | 100nf | Capacitors_SMD:C_0603 | C402 |
| 1 | 10uf | Capacitors_SMD:CP_Elec_5x5.3 | C401 |
| 1 | 15 uf 15V | Capacitors_SMD:CP_Elec_4x5.7 | C302 |
| 1 | 4.7uH | Inductors_SMD:L_7.3x7.3_H4.5 | L401 |
| 1 | 47 nf | Capacitors_SMD:C_0603 | C303 |
| 1 | AP63205 | TO_SOT_Packages_SMD:TSOT-23-6_MK06A | U401 |
| 1 | ESP32_DEVKIT_C | ESP32Boards:ESP32-Devkit-C | U201 |
| 1 | LCC | LCC_LOGO:LCC_LOGO_4.5x4.5 | G*** |
| 1 | Servo 1 | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | J102 |
| 1 | Servo 2 | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | J103 |
| 1 | Servo 3 | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | J104 |
| 1 | Servo 4 | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | J105 |
| 1 | Servo 5 | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | J106 |
| 1 | Servo 6 | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | J107 |
| 1 | Servo 7 | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | J108 |
| 1 | Servo 8 | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | J109 |
| 1 | TCAN332DR | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U301 |
| 1 | TTGO-T1 | ESP32Boards:TIGO-T1 | U202 |
| 1 | Termination | Pin_Headers:Pin_Header_Straight_2x02_Pitch2.54mm | JP301 |
The 32 most common of 41 parts.
More from RobertPHeller/ESP32-LCC
12- 2 layers165.1 × 132.1 mm

- 2 layers104.1 × 127 mm

- 2 layers225 × 120 mm

- 2 layers99.1 × 125.7 mm

- 2 layers99.1 × 125.7 mm

- 2 layers104.1 × 127 mm

- 2 layers99.1 × 125.7 mm

- 2 layers119.4 × 127 mm

- 2 layers82.6 × 113 mm

- 2 layers115.6 × 130.8 mm

- 2 layers123.2 × 148.6 mm

- 2 layers115.6 × 130.8 mm

Similar boards
- 4 layers220.5 × 51 mm

MuonScope
manvalan/MuonScope
Piano di rivelazione MuonScope con 16 fotodiodi VBPW34S in matrice 4×4 a passo 10 mm, per il bus MIKILAB REV5.1.
102 parts - 4 layers61 × 81 mm

- 2 layers101.6 × 101.6 mm

- 2 layers64.8 × 74.5 mm

ReadingLampController
vsi5004/ReadingLampController
A repurposing of my LCC Lighting Controller hardware into a customizable, Matter enabled, RGBW reading lamp
67 parts - 2 layers105.6 × 73.3 mm

STM32F767ZI LCC PNET Router
RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading
52 parts24 - 2 layers180 × 125 mm

- 2 layers

- 2 layers140.1 × 160 mm

PracticeFieldTimer-38-pin ESP32s2
emintz/FirstRobotics
Projects that support First Robotics activities
28 parts1AGPL-3.0
Questions
How big is the ESP32-OctalServo PCB?
It measures 66 × 91.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ESP32-OctalServo use?
41 parts, built around the ESP32-DEVKITC-VE, AP63205WU and RJ45. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ESP32-OctalServo KiCad files?
From the RobertPHeller/ESP32-LCC repository on GitHub, at the commit this page was made from: the board is ESP32-OctalServo/ESP32-OctalServo.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the ESP32-OctalServo design in my own project?
Its repository states no licence, so its author keeps all rights: ask RobertPHeller before reusing the design.