2 layers31 × 66.5 mm
2 layers55.9 × 71.3 mm
Cartridge
robboworld/Robokit_0.4Schematics, gerber, etc ScratchDuino hardware v0.4
- Size
- 55.9 × 71.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 30
- Pads
- 117
- Tracks, vias
- 206, 16
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 26 Oct 2015
- Updated
- 28 Jan 2016
Overview
Cartridge is an open-source printed circuit board by robboworld, from the robboworld/Robokit_0.4 repository on GitHub, published under the GPL-2.0 licence. It is a 2-layer board of 55.9 × 71.3 mm with 13 parts on 30 nets, routed with 206 tracks and 16 vias.
It is built around the HC-05 and DS1040-02RN. Its parts include 3 resistors, 3 diodes, 2 switches, 1 IC and 1 connector. It belongs with the retro computing and games boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
2README
README.mdscratchduino-RoboKit v0.4
This repository includes body, schematics, PCB, documentation and sources for RoboKit v0.4
#Directories
- Body - the body of roboplatform and sensors
- Documentation - the .pdf schematics, etc
- Firmware - the firmware for RoboKit v0.4
- PCB - Printed Circuit Boards for Roboplatform and sensors
- Gerber - gerber files + gerber drill files
- Cartridge
- ...
- SVG - svg files without drill files
- Cartridge
- ...
- Gerber - gerber files + gerber drill files
- Sources - the sources for PCB and Body
- Cartridge - Kicad files for PCB
- make - This bash script distribute Gerber, SVG and PDF files to directories PCB,Documentation
- PCB - Here you need print PCB in svg and gerber formats( read make )
- ...
- Cartridge - Kicad files for PCB
Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | NPHd3,1 | NPHd3,1, NPHd3,1, NPHd3,1 | |
| 2 | LED | LED-1206 | D2, D3 |
| 1 | 10k | SMD0805 | R2 |
| 1 | 1k | SMD0805 | R3 |
| 1 | 5.6k | SMD0805 | R1 |
| 1 | ARDUINO_UNO | ARDUINO_SHIELD | D1 |
| 1 | DS1040-02RN | DS1040-02RN | SW1 |
| 1 | HC-05 | HC-05 | U1 |
| 1 | SL-34 | SL-34_CARTRIDGE | P1 |
| 1 | SWT-81-7 | RSTBUTTON | SW3 |
More from robboworld/Robokit_0.4
7- 2 layers31 × 66.5 mm
- 2 layers27 × 19 mm
- 2 layers31 × 22 mm
- 2 layers31 × 22 mm
- 2 layers31 × 22 mm
IRDistanceSensor
robboworld/Robokit_0.4
Schematics, gerber, etc ScratchDuino hardware v0.4
2 partsGPL-2.0 - 2 layers31 × 22 mm
Similar boards
- 4 layers126.6 × 37.7 mm
Gruzik2.0
NYDEREK/LineFollower_GRUZIK2.0-light
GRUZIK2.0 is simple light construction made for "line follower light" competition
50 parts101MIT - 2 layers100 × 100 mm
- 2 layers90.9 × 38.4 mm
Snaaur v1
duongngochoan/Self_balancing_robot_PID
Used a PID control algorithm and MPU605 sensor to balance a two-wheeled robot.
58 parts7 - 2 layers56.8 × 68.6 mm
Emg
leikoilja/muscle-imbalance-detection
A device to assist patients with the rehabilitation of the knee joint after a knee surgery using EMG biofeedback. The device can reliably detect muscle activity and display it in an easy-to-use mobile application.
84 parts6MIT - 2 layers135.8 × 56.1 mm
Power board
xtarke/automated_buggy
This shield connects microcontroller (MSP-EXP430FR2355) pins to the car's power board. Go to Power Board for more hardware information.
87 parts5GPL-3.0 - 2 layers33 × 58.8 mm
- 4 layers160 × 117.5 mm
- 2 layers
Questions
How big is the Cartridge PCB?
It measures 55.9 × 71.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Cartridge use?
13 parts, built around the HC-05 and DS1040-02RN. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Cartridge KiCad files?
From the robboworld/Robokit_0.4 repository on GitHub, at the commit this page was made from: the board is Sources/Cartridge/Cartridge.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Cartridge design in my own project?
Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).