2 layers55.9 × 71.3 mm
2 layers31 × 22 mm
LEDSensor
robboworld/Robokit_0.4Schematics, gerber, etc ScratchDuino hardware v0.4
- Size
- 31 × 22 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 3
- Nets
- 3
- Pads
- 10
- Tracks, vias
- 9, 2
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 26 Oct 2015
- Updated
- 28 Jan 2016
Overview
LEDSensor is an open-source printed circuit board by robboworld, from the robboworld/Robokit_0.4 repository on GitHub, published under the GPL-2.0 licence. It is a 2-layer board of 31 × 22 mm with 3 parts on 3 nets, routed with 9 tracks and 2 vias.
Its parts include 1 resistor, 1 diode and 1 connector.
README
README.mdscratchduino-RoboKit v0.4
This repository includes body, schematics, PCB, documentation and sources for RoboKit v0.4
#Directories
- Body - the body of roboplatform and sensors
- Documentation - the .pdf schematics, etc
- Firmware - the firmware for RoboKit v0.4
- PCB - Printed Circuit Boards for Roboplatform and sensors
- Gerber - gerber files + gerber drill files
- Cartridge
- ...
- SVG - svg files without drill files
- Cartridge
- ...
- Gerber - gerber files + gerber drill files
- Sources - the sources for PCB and Body
- Cartridge - Kicad files for PCB
- make - This bash script distribute Gerber, SVG and PDF files to directories PCB,Documentation
- PCB - Here you need print PCB in svg and gerber formats( read make )
- ...
- Cartridge - Kicad files for PCB
Parts
3| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | KPA3010 | D1 | |
| 1 | SENSOR | P3 | |
| 1 | 100 | SMD0805 | R1 |
Questions
How big is the LEDSensor PCB?
It measures 31 × 22 mm and has 2 copper layers, 1.6 mm thick.
What parts does the LEDSensor use?
3 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LEDSensor KiCad files?
From the robboworld/Robokit_0.4 repository on GitHub, at the commit this page was made from: the board is Sources/LEDSensor/LEDSensor.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the LEDSensor design in my own project?
Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from robboworld/Robokit_0.4
7- 2 layers31 × 66.5 mm
- 2 layers31 × 66.5 mm
- 2 layers27 × 19 mm
- 2 layers31 × 22 mm
- 2 layers31 × 22 mm
IRDistanceSensor
robboworld/Robokit_0.4
Schematics, gerber, etc ScratchDuino hardware v0.4
2 partsGPL-2.0 - 2 layers31 × 22 mm
Similar boards
- 2 layers40 × 30 mm
- 2 layers51.9 × 16 mm
Passive2-rpi non standard adapter
hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO
3 parts4.4kGPL-2.0 - 2 layers16.3 × 16.3 mm
- 2 layers
Sub
atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️
3 parts4kMIT - 2 layers85 × 30 mm
- 2 layers124.5 × 33.7 mm
- 2 layers10.5 × 83 mm
- 2 layers21.2 × 51.3 mm
Pico reset
hackclub/sprig
🍃 Learn to code by making games in a JavaScript web-based game editor.
3 parts1.1kMIT