2 layers55.9 × 71.3 mm
2 layers31 × 66.5 mm
LineSensor
robboworld/Robokit_0.4Schematics, gerber, etc ScratchDuino hardware v0.4
- Size
- 31 × 66.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 7
- Nets
- 4
- Pads
- 16
- Tracks, vias
- 27, 4
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 26 Oct 2015
- Updated
- 28 Jan 2016
Overview
LineSensor is an open-source printed circuit board by robboworld, from the robboworld/Robokit_0.4 repository on GitHub, published under the GPL-2.0 licence. It is a 2-layer board of 31 × 66.5 mm with 7 parts on 4 nets, routed with 27 tracks and 4 vias.
Its parts include 2 resistors, 2 diodes and 1 connector.
README
README.mdscratchduino-RoboKit v0.4
This repository includes body, schematics, PCB, documentation and sources for RoboKit v0.4
#Directories
- Body - the body of roboplatform and sensors
- Documentation - the .pdf schematics, etc
- Firmware - the firmware for RoboKit v0.4
- PCB - Printed Circuit Boards for Roboplatform and sensors
- Gerber - gerber files + gerber drill files
- Cartridge
- ...
- SVG - svg files without drill files
- Cartridge
- ...
- Gerber - gerber files + gerber drill files
- Sources - the sources for PCB and Body
- Cartridge - Kicad files for PCB
- make - This bash script distribute Gerber, SVG and PDF files to directories PCB,Documentation
- PCB - Here you need print PCB in svg and gerber formats( read make )
- ...
- Cartridge - Kicad files for PCB
Parts
7| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | NPHd3,1 | , | |
| 1 | VSMB2000 | D2 | |
| 1 | TEMD1000 | D1 | |
| 1 | SENSOR | P1 | |
| 1 | 100 | SMD0805 | R1 |
| 1 | 100K | SMD0805 | R3 |
More from robboworld/Robokit_0.4
7- 2 layers31 × 66.5 mm
- 2 layers27 × 19 mm
- 2 layers31 × 22 mm
- 2 layers31 × 22 mm
- 2 layers31 × 22 mm
IRDistanceSensor
robboworld/Robokit_0.4
Schematics, gerber, etc ScratchDuino hardware v0.4
2 partsGPL-2.0 - 2 layers31 × 22 mm
Similar boards
- 2 layers
Encoder
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
7 parts4.3kMIT - 2 layers40 × 20 mm
- 2 layers19.8 × 30 mm
- 2 layers35.6 × 58.2 mm
Display Carrier
AxxAxx/AxxSolder
STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power
7 parts1.7kGPL-3.0 - 2 layers20.3 × 16.3 mm
- 2 layers26 × 44 mm
Compact carrier board
jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.
7 parts1.1k - 2 layers26.4 × 53.8 mm
Atari pickup
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
7 parts1kGPL-3.0 - 2 layers
Questions
How big is the LineSensor PCB?
It measures 31 × 66.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the LineSensor use?
7 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LineSensor KiCad files?
From the robboworld/Robokit_0.4 repository on GitHub, at the commit this page was made from: the board is Sources/LineSensor/LineSensor.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the LineSensor design in my own project?
Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).