
OppakkerV5
robbertvdzon/schaakrob
XRL kabel: https://www.allekabels.nl/xlr-kabel/8/1312747/xlr-kabel.html XRL chassis: https://www.allekabels.nl/xlr-stekker/69/1601/xlr-chassis-3-polig.html XRL chassis…

XRL kabel: https://www.allekabels.nl/xlr-kabel/8/1312747/xlr-kabel.html XRL chassis: https://www.allekabels.nl/xlr-stekker/69/1601/xlr-chassis-3-polig.html XRL chassis…
OppakkerV3 is an open-source printed circuit board by robbertvdzon, from the robbertvdzon/schaakrob repository on GitHub. It is a 2-layer board of 60 × 70 mm with 26 parts on 43 nets, routed with 146 tracks and 0 vias.
It is built around the IRLZ34N. Its parts include 12 resistors, 4 diodes, 4 transistors, 3 connectors and 1 switch. It belongs with the AVR (ATmega, ATtiny) boards of this library.
nano: https://www.bitsandparts.nl/Arduino-Nano-3.0-Atmega328-5V-16-MHz-(compatible-clone)-p122093 headers voor nano: https://www.bitsandparts.nl/Headerpins-stackable-11mm-16-pins-p119111 4 pins header: https://www.bitsandparts.nl/Header-voor-PCB-4-pins-p101250 4 pin kabel: https://www.bitsandparts.nl/Signaalconnector-Molex-4-polig-met-draad-p113160 3 pin header: https://www.bitsandparts.nl/Header-voor-PCB-3-pins-p101249 3 pin kabel: https://www.bitsandparts.nl/Signaalconnector-Molex-3-polig-met-draad-p113159 2 pin header: https://www.bitsandparts.nl/Header-voor-PCB-2-pins-p101248 2 pin kabel: https://www.bitsandparts.nl/Signaalconnector-Molex-2-polig-met-draad-p113158 grote print plaat: https://www.bitsandparts.nl/Prototyping-board-PCB-(39x63-gaats-10x16cm)-p100969 kleine print plaat: https://www.bitsandparts.nl/Prototyping-board-PCB-(39x19-gaats-10x5cm)-p100967
XRL kabel: https://www.allekabels.nl/xlr-kabel/8/1312747/xlr-kabel.html XRL chassis: https://www.allekabels.nl/xlr-stekker/69/1601/xlr-chassis-3-polig.html XRL chassis: https://www.allekabels.nl/xlr-stekker/69/1602/xlr-chassis-3-polig.html
schakelaar: https://www.allekabels.nl/schakelaar/7303/1079540/wipschakelaar.html (max 16A = 2A per motor!)
see /documentation/setup_pi.md
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 10K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R3, R4, R6, R8, R9, R11, R12 |
| 4 | 100ohm | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R2, R5, R7, R10 |
| 4 | IRLZ34N | Package_TO_SOT_THT:TO-220-3_Vertical | Q1, Q2, Q3, Q4 |
| 4 | LED | LED_THT:LED_D5.0mm | D1, D2, D3, D4 |
| 3 | Conn_01x03 | Connector_Molex:Molex_KK-254_AE-6410-03A_1x03_P2.54mm_Vertical | J1, J2, J4 |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | A1 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_15x7.5RM7.6 | BZ1 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH-12mm | SW1 |

robbertvdzon/schaakrob
XRL kabel: https://www.allekabels.nl/xlr-kabel/8/1312747/xlr-kabel.html XRL chassis: https://www.allekabels.nl/xlr-stekker/69/1601/xlr-chassis-3-polig.html XRL chassis…

robbertvdzon/schaakrob
XRL kabel: https://www.allekabels.nl/xlr-kabel/8/1312747/xlr-kabel.html XRL chassis: https://www.allekabels.nl/xlr-stekker/69/1601/xlr-chassis-3-polig.html XRL chassis…

robbertvdzon/schaakrob
XRL kabel: https://www.allekabels.nl/xlr-kabel/8/1312747/xlr-kabel.html XRL chassis: https://www.allekabels.nl/xlr-stekker/69/1601/xlr-chassis-3-polig.html XRL chassis…


Hans-Beerman/Deurnode_ESP32-PoE
KiCad design Deurnode for the MakerSpace Leiden, based on the Olimex ESP32-PoE

3D-Printing-for-Microfluidics/3D_printer_control
2nd generation 3D printer control software

DavidJ-Saving-Time/watch-cleaner
So this is a very rough draft of code designed to run on an esp32 to control a watch cleaning machine see this YouTube video https://youtu.be/Opr75n8DbYY I'll be adding to this and making it easier for people to use.

destroyer796/3DWelder
An overbuilt 3D pen that will use a chc pro hotend and custom dc extruder powered by a power tool battery

grillbaer/solar-power-supply
Solar power harvesting for micro controller projects with li-Ion battery and highly efficient charge controller

volw/wifiOiler
Automatic, distance depending chain oiler for motorbikes with track recording (GPS).

aidtopia/spider_dropper
Mechanism to "drop" a spider (or other lightweight prop) for Halloween fun
It measures 60 × 70 mm and has 2 copper layers, 1.6 mm thick.
26 parts, built around the IRLZ34N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the robbertvdzon/schaakrob repository on GitHub, at the commit this page was made from: the board is schema-ontwerp/oppakkerV3/oppakkerV3.kicad_pcb and its schematic schema-ontwerp/oppakker/oppakker.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask robbertvdzon before reusing the design.