

Deurnode nieuw
KiCad design Deurnode for the MakerSpace Leiden, based on the Olimex ESP32-PoE
- Size
- 224.8 × 60.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 38
- Nets
- 39
- Pads
- 128
- Tracks, vias
- 317, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 27 Feb 2020
- Updated
- 8 Mar 2020
Overview
Deurnode nieuw is an open-source printed circuit board by Hans-Beerman, from the Hans-Beerman/Deurnode_ESP32-PoE repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 224.8 × 60.3 mm with 38 parts on 39 nets, routed with 317 tracks and 0 vias.
It is built around the PC814, BC547 and IRLZ34N. Its parts include 16 connectors, 11 resistors, 3 diodes, 2 transistors and 1 capacitor.
Main components
3README
README.mdKiCaD (concept) design Deurnode nieuw
Current version: concept V0.8
This repository contains the KiCad design for Deurnode nieuw, a deurnode for the Makerspace Leiden. This new design is based on the use of an Olimex ESP32-PoE.
This Deurnode Nieuw has the following features:
-
Two digital inputs van be used. The following options are available: Option 1:
- 1x Simple digital switch input (to be used for the Grote Schakelaar e.g.).
- 1x Opto coupler input. Remark: If input Schakelaar is not used, C1 could be removed
Option 2:
-
2x opto coupler input.
Both opto couplers can detect 230V AC available or not. By changing the input resistors of the optocouplers the inputs can be used for other voltages as well.
-
1 digital output is available. The following options are available:
- Digital output, to directly control a buzzer.
- Digital output to switch a coil or so. There are two options:
- A relais controlled isolated output (max. 250V AC/10A).
- A FET based output using the 12V power from an external power supply. The FET can handle max DC 55V/30 A. In our case max Ids is much less, due to to low maximum gateway voltage of about 3V. In case it is needed, the FET can be kept cool by means of a small cool block. For testing purposes, both the relais and the FET can be switched on permanently by placing jumper "Rel./FET Override".
-
SPI based RFID reader connection..
-
Step motor output, based on Polu Breakout A4988.
Power supply:
Depending on how the deurnode is used, there are two options to provide power to the deurnode print:
- The ethernet port of the Olimex ESP32-PoE board is directly connected to the MSL LAN. Jumper J19 (Use external 12V) must be removed in this situation. In that case there is no 12V available. It is however possible to provide 12V with an external PSU. Without external 12 V the step motor and the buzzer will not function at all and also the 12V output for the FET will not be available.
- To power the board via an external PSU (only). J19 must be installed and the ethernet board of the Olimex board should not be connected to a PoE switch port.
The following solution is available to couple the deurnode directly to a PoE connection of MSL LAN and also provide 12V to the deurnode board. See the diagram in the file "Deurnode Nieuw power supply V0.1 20200302.pdf"
For this solution a PoE splitter is used. On the Deurnode board jumper J19 must be installed.
Protection 230V circuits for the opto couplers
To prevent hazardous shocks, a plexiglass plate can be mounted on the board. The board contains 3 holes to mount a plate.
For more information about these protection plates, see the "DeurnodeProtection-230V V0.2 20200308.pdf" or the Autocad "DeurnodeProtection-230V.dwg" files.
Parts
38| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 220k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R6, R7, R8, R9 |
| 3 | Screw_Terminal_01x02 | TerminalBlock_RND:TerminalBlock_RND_205-00287_1x02_P5.08mm_Horizontal | J7, J14, J15 |
| 3 | Screw_Terminal_01x03 | TerminalBlock_RND:TerminalBlock_RND_205-00288_1x03_P5.08mm_Horizontal | J4, J9, J12 |
| 2 | 1N4004 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1, D2 |
| 2 | 4k7 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R4 |
| 2 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5, J6 |
| 2 | PC814 | PC814:DIL04 | OK1, OK2 |
| 1 | 10R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R11 |
| 1 | 2k2 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R10 |
| 1 | 2n2 | Capacitor_THT:C_Disc_D5.1mm_W3.2mm_P5.00mm | C1 |
| 1 | 330R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3 |
| 1 | 47k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R5 |
| 1 | BC547 | Package_TO_SOT_THT:TO-92_Inline | Q2 |
| 1 | BarrelJack_DC5.5F | Footprints:BarrelJack_DC5.5F | J18 |
| 1 | Conn_01x08 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Horizontal | J3 |
| 1 | EXT1 | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Vertical | J1 |
| 1 | EXT2 | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Vertical | J2 |
| 1 | Force output FET on | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J10 |
| 1 | Force output Relais on | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J22 |
| 1 | IRLZ34N | Package_TO_SOT_THT:TO-220-3_Vertical | Q1 |
| 1 | Jumper Use external 12V | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J19 |
| 1 | LED | LED_THT:LED_D3.0mm | D3 |
| 1 | OKI-78SR-5_1.5-W36-C | Converter_DCDC:Converter_DCDC_muRata_OKI-78SR_Vertical | U2 |
| 1 | Pololu_Breakout_A4988 | Module:Pololu_Breakout-16_15.2x20.3mm | A1 |
| 1 | SANYOU_SRD_Form_C | Relay_THT:Relay_SPDT_SANYOU_SRD_Series_Form_C | K1 |
| 1 | Screw_Terminal_01x04 | TerminalBlock_RND:TerminalBlock_RND_205-00289_1x04_P5.08mm_Horizontal | J8 |
Similar boards
- 2 layers86.7 × 92.2 mm

- 2 layers

AC Power Controller
yojit-kumar/PH3144_ElectronicsProject
A repo to document and backup project details for the Electronics Lab project
20 partsCC0-1.0 - 2 layers100 × 70 mm

- 2 layers81.9 × 81.9 mm

Blinds
bgerp/ztm_doc
This repository is made to hold all the schematics and sheets around the Zontromat project and BCVT. This includes: - Electrical schematics and sheets. - Electronic schematics and sheets.
24 parts - 2 layers78.5 × 104.5 mm

- 2 layers100 × 50 mm

- 2 layers111.3 × 68.1 mm

MKS relay v4
3D-Printing-for-Microfluidics/3D_printer_control
2nd generation 3D printer control software
67 parts3GPL-3.0 - 2 layers

Watch cleaner pcb
DavidJ-Saving-Time/watch-cleaner
So this is a very rough draft of code designed to run on an esp32 to control a watch cleaning machine see this YouTube video https://youtu.be/Opr75n8DbYY I'll be adding to this and making it easier for people to use.
16 parts3MIT
Questions
How big is the Deurnode nieuw PCB?
It measures 224.8 × 60.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Deurnode nieuw use?
38 parts, built around the PC814, BC547 and IRLZ34N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Deurnode nieuw KiCad files?
From the Hans-Beerman/Deurnode_ESP32-PoE repository on GitHub, at the commit this page was made from: the board is Deurnode nieuw.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Deurnode nieuw design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).