
Deurnode nieuw
Hans-Beerman/Deurnode_ESP32-PoE
KiCad design Deurnode for the MakerSpace Leiden, based on the Olimex ESP32-PoE

Maxiclaro1 (2) is an open-source printed circuit board by Maxi6w, from the Maxi6w/Rele-Wifi-Claro repository on GitHub. It is a 2-layer board of 86.7 × 92.2 mm with 41 parts on 63 nets, routed with 234 tracks and 0 vias.
It is built around the L7805, MMBT2222A and PC814, with the SRD-05VDC-SL-C among its other parts. Its parts include 12 resistors, 8 diodes, 6 connectors, 5 switches and 4 transistors.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 220R | Resistor_SMD:R_0805_2012Metric | R2, R3, R4, R6, R7, R9, R10, R12 |
| 4 | 1K | Resistor_SMD:R_0805_2012Metric | R1, R5, R8, R11 |
| 4 | 1N4007 | Diode_SMD:D_0805_2012Metric | D2, D4, D6, D8 |
| 4 | LED | LED_SMD:LED_0805_2012Metric | D1, D3, D5, D7 |
| 4 | MMBT2222A | Package_TO_SOT_SMD:SOT-23 | Q5, Q6, Q8, Q9 |
| 4 | Screw_Terminal_01x03 | TerminalBlock:TerminalBlock_bornier-3_P5.08mm | J1, J3, J4, J5 |
| 2 | PC814 | PC814:DIL04 | OK1, OK2 |
| 2 | PC814 | DIL04:DIL04 | OK3, OK4 |
| 2 | SRD-05VDC-SL-C | SRD-05VDC-SL-C:RELAY_SRD-05VDC-SL-C | K1, K2 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | ENTRADA | TerminalBlock:TerminalBlock_Altech_AK300-2_P5.00mm | J2 |
| 1 | L7805 | Package_TO_SOT_SMD:TO-263-2 | U2 |
| 1 | SRD-05VDC-SL-C | RELAY:RELAY_SRD-05VDC-SL-C | K3 |
| 1 | SRD-05VDC-SL-C | RELAY_SRD-05VDC-SL-C:RELAY_SRD-05VDC-SL-C | K4 |
| 1 | SW_DPST_x2 | 2MS1T1B1M2QES:SW_2MS1T1B1M2QES-5 | SW1 |
| 1 | ~ | EESTN5:ESP32_DevKit_V1_CH9102X | U1 |

Hans-Beerman/Deurnode_ESP32-PoE
KiCad design Deurnode for the MakerSpace Leiden, based on the Olimex ESP32-PoE

yojit-kumar/PH3144_ElectronicsProject
A repo to document and backup project details for the Electronics Lab project


bgerp/ztm_doc
This repository is made to hold all the schematics and sheets around the Zontromat project and BCVT. This includes: - Electrical schematics and sheets. - Electronic schematics and sheets.


wildsystems/ws-uc06
Custom ESP32-C6 development board with power input protection, relay outputs, opto-isolated I/O, NTC sensor input, and JTAG debugging. Designed as a DIY-friendly controller base.

Plokkke/sauter-marapi-esphome
ESPHome / Home Assistant pilot wire (fil pilote) controller for the Sauter Marapi tactile towel radiator — KiCad PCB, reverse engineering notes. Study phase, untested.

It measures 86.7 × 92.2 mm and has 2 copper layers, 1.6 mm thick.
41 parts, built around the L7805, MMBT2222A, PC814 and SRD-05VDC-SL-C. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Maxi6w/Rele-Wifi-Claro repository on GitHub, at the commit this page was made from: the board is Maxiclaro1 (2).kicad_pcb and its schematic Maxiclaro1 (2).kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Maxi6w before reusing the design.