Skip to the content
2 layers38 × 90 mmController board, the printed circuit board in 3D

the controller board and hard using ESP32-S2 for E-PIX and other boards

Size
38 × 90 mm
Copper layers
2
Thickness
1.6 mm
Parts
76
Nets
58
Pads
285
Tracks, vias
689, 266
Pours
4
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
25 Jan 2026
Updated
23 Feb 2026

Overview

Controller board is an open-source printed circuit board by rmf-hru-wg, from the rmf-hru-wg/E-PIX_controller repository on GitHub. It is a 2-layer board of 38 × 90 mm with 76 parts on 58 nets, routed with 689 tracks and 266 vias.

It is built around the ESP32-S3-MINI-1-N8, WS2812B and CUHS20S60,H3F. Its parts include 22 capacitors, 20 resistors, 18 connectors, 6 diodes and 2 ICs. It belongs with the ESP32 boards of this library.

Main components

3

Parts

76
QtyValueFootprintReferences
80.1uCapacitor_SMD:C_0603_1608MetricC2, C6, C7, C8, C19, C20, C21, C22
710kResistor_SMD:R_0603_1608MetricR6, R9, R10, R11, R14, R15, R16
62.2kResistor_SMD:R_0805_2012MetricR7, R8, R12, R13, R17, R18
50.1u/25VCapacitor_SMD:C_0603_1608MetricC3, C9, C10, C13, C14
510u/50V/3216Capacitor_SMD:C_1206_3216MetricC11, C15, C16, C17, C18
44.7kResistor_SMD:R_0805_2012MetricR2, R3, R19, R20
3MountingHoleMounting:MountingHole_3.2mm_M3_DIN965H3, H4, H6
221Resistor_SMD:R_0603_1608MetricR4, R5
247pCapacitor_SMD:C_0201_0603MetricC4, C5
2CUHS20S60/2A/60VDiode:Diode_US2HD5, D6
2I2CConnector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_VerticalJ11, J17
2SW_PushSwitch:SW_SKRPACE010SW1, SW2
2USB_C_Receptacle_USB2.0Conn:USB_C_Receptacle_XKB_U262-16XN-4BVC11_with_modelJ1, J18
2WS2812BLED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mmD8, D9
110u/35VCapacitor_SMD:C_1206_3216MetricC1
11kResistor_SMD:R_0805_2012MetricR1
122u/25V/2012Capacitor_SMD:C_0805_2012MetricC12
1AZ1117-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U7
1CUHS20S60Diode:Diode_US2HD2
1ESP32-S3-MINI-1RF_Module:ESP32-S2-MINI-1U1
1LEDLED_SMD:LED_0603_1608MetricD1
1LOGOLogo:E-PIX_05x05G***
1LOGOLogo:Robomech_05x05G***
1LOGOLogo:HRU_05x05G***
1VinConnector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_VerticalJ2
1handle_I2CConnector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_VerticalJ3
1handle_sw1Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_VerticalJ7
1handle_sw2Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_VerticalJ8
1handle_sw3Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_VerticalJ9
1input_01Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_VerticalJ4
1input_02Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_VerticalJ5
1input_03Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_VerticalJ6
1input_04Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_VerticalJ10
1input_05Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_VerticalJ13
1input_06Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_VerticalJ14
1input_07Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_VerticalJ15
1input_08Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_VerticalJ16
1stickConnector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_VerticalJ12

Similar boards

  • 2 layers50 × 50 mmI2C OPT, the printed circuit board in 3D

    I2C OPT

    Andreafacci/Optical-Wireless-Intra-Satellite-Bus

    Optical Wireless Intra-Satellite Communications

    158 parts
  • 2 layers45 × 60 mm4dn firing timing probe, the printed circuit board in 3D

    4dn firing timing probe

    doge-gif/4dn-firing-timing-probe

    DIY 4DN (srv250, renessa) engine fire timing probe

    22 parts
  • 4 layers182 × 150 mmStarman, the printed circuit board in 3D

    Starman

    adamm/starman

    Starman Christmas Tree Topper PCB

    248 parts3
  • 4 layers25.4 × 62.7 mmESP32 Board, the printed circuit board in 3D

    ESP32 Board

    Fred98246/ESP-32-Dev-Board

    Custom ESP32-S3-MINI-1 development board

    27 parts2MIT
  • 4 layers65 × 42 mmReceiver, the printed circuit board in 3D

    Receiver

    andrew153d/RemoteWelderController

    A pair of devices meant to retrofit older welders with wireless connectivity. This document covers the usage and mechanical makeup, the cost overview can be found here.

    131 parts1

Questions

How big is the Controller board PCB?

It measures 38 × 90 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Controller board use?

76 parts, built around the ESP32-S3-MINI-1-N8, WS2812B and CUHS20S60,H3F. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Controller board KiCad files?

From the rmf-hru-wg/E-PIX_controller repository on GitHub, at the commit this page was made from: the board is controller_board/controller_board.kicad_pcb and its schematic controller_board/controller_board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Controller board design in my own project?

Its repository states no licence, so its author keeps all rights: ask rmf-hru-wg before reusing the design.