Skip to the content
2 layers53.3 × 91.4 mmESP32-C6 interface, the printed circuit board in 3D

ESP32-C6 interface

KakuheikiCreator/KiCAD
Size
53.3 × 91.4 mm
Copper layers
2
Thickness
1.6 mm
Parts
58
Nets
41
Pads
288
Tracks, vias
539, 34
Pours
2
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
1 Sep 2024
Updated
5 Jul 2025

Overview

ESP32-C6 interface is an open-source printed circuit board by KakuheikiCreator, from the KakuheikiCreator/KiCAD repository on GitHub, published under the MIT licence. It is a 2-layer board of 53.3 × 91.4 mm with 58 parts on 41 nets, routed with 539 tracks and 34 vias.

It is built around the ESP32-C6-WROOM-1-N8, AO3401A and CUHS20S60,H3F, with the RB160M-30 among its other parts. Its parts include 20 resistors, 10 capacitors, 8 connectors, 8 switches and 4 ICs. It belongs with the interfaces and adapters boards and the ESP32 and RISC-V boards of this library.

Main components

4

README

ESP32-C6_interface/README.md

ESP32-C6 interface PCB

This is a PCB that uses ESP32-C6, LCD (AQM1602), and four buttons.

Release History

VersionRelease DateOverview
V1.02025/07/05New Creation

License

MIT License

Photo

Image Image****

Parts

58
QtyValueFootprintReferences
8SW_PushButton_Switch_THT:SW_PUSH_6mm_H7.3mmSW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8
610KResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR5, R7, R8, R15, R17, R18
4100KResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR9, R10, R19, R20
41uCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC1, C2, C6, C7
43.3KResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1, R4, R11, R14
20.1uCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC3, C8
21.5KResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR3, R13
210uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC5, C10
2150Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR6, R16
21KResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR2, R12
22.2uHInductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolderL1, L2
24.7uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC4, C9
2AO3401APackage_TO_SOT_SMD:SOT-23Q1, Q2
2AQM1602YUser_Library:LCD_AQM1602YLCD1, LCD2
2Conn_01x02Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ1, J5
2Conn_01x04Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ2, J6
2Conn_01x14Connector_PinHeader_2.54mm:PinHeader_1x14_P2.54mm_VerticalJ4, J8
2Conn_01x16Connector_PinHeader_2.54mm:PinHeader_1x16_P2.54mm_VerticalJ3, J7
2ESP32-C6-WROOM-1PCM_Espressif:ESP32-C6-WROOM-1U1, U3
2~User_Library:LM3671U2, U4
1CUHS20S60Diode_SMD:D_SOD-323_HandSolderingD2
1RB160MDiode_SMD:Nexperia_CFP3_SOD-123WD1

More from KakuheikiCreator/KiCAD

3
  • 2 layers50.8 × 50.8 mmIpm165, the printed circuit board in 3D

    Ipm165

    KakuheikiCreator/KiCAD

    37 partsMIT

Similar boards

  • 2 layers100 × 100 mmFreeDSP Catamaran, the printed circuit board in 3D

    FreeDSP Catamaran

    freeDSP/FreeDSP_Catamaran_AB

    A mono contruction Differntial 1 Input 4 output ADAU1701 DSP board, 96kHz TDM8 interlink is available.

    257 parts12CC0-1.0
  • 2 layers134 × 109.5 mmFreeDSP SMD AB plus, the printed circuit board in 3D

    FreeDSP SMD AB plus

    CyberPit/FreeDSP_Classic_SMD_AB_plus-II

    An extended version of FreeDSP Classic SMD A/B

    233 parts6
  • 2 layers92 × 122 mmCalc, the printed circuit board in 3D

    Calc

    JeffreyWangDev/Sum-Intro-Number-thing

    115 partsMIT
  • 2 layers72.1 × 47.9 mmPowerMeter2026 nRF, the printed circuit board in 3D

    PowerMeter2026 nRF

    KUBTSSAvionics/PowerMeter2026

    PowerMeter2026

    23 parts
  • 2 layers50 × 50 mmI2C OPT, the printed circuit board in 3D

    I2C OPT

    Andreafacci/Optical-Wireless-Intra-Satellite-Bus

    Optical Wireless Intra-Satellite Communications

    158 parts
  • 2 layers45 × 60 mm4dn firing timing probe, the printed circuit board in 3D

    4dn firing timing probe

    doge-gif/4dn-firing-timing-probe

    DIY 4DN (srv250, renessa) engine fire timing probe

    22 parts
  • 2 layers38 × 90 mmController board, the printed circuit board in 3D

    Controller board

    rmf-hru-wg/E-PIX_controller

    the controller board and hard using ESP32-S2 for E-PIX and other boards

    76 parts

Questions

How big is the ESP32-C6 interface PCB?

It measures 53.3 × 91.4 mm and has 2 copper layers, 1.6 mm thick.

What parts does the ESP32-C6 interface use?

58 parts, built around the ESP32-C6-WROOM-1-N8, AO3401A, CUHS20S60,H3F and RB160M-30. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ESP32-C6 interface KiCad files?

From the KakuheikiCreator/KiCAD repository on GitHub, at the commit this page was made from: the board is ESP32-C6_interface/ESP32-C6_interface.kicad_pcb and its schematic 5way_lcd_interface/5way_lcd_interface.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the ESP32-C6 interface design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).