2 layers65 × 56 mm
2 layers43.8 × 54 mm
1bitsy convertor
rmemory/generic_sensors- Size
- 43.8 × 54 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 23
- Nets
- 20
- Pads
- 87
- Tracks, vias
- 202, 18
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 13 Dec 2017
- Updated
- 19 Dec 2017
Overview
1bitsy convertor is an open-source printed circuit board by rmemory, from the rmemory/generic_sensors repository on GitHub. It is a 2-layer board of 43.8 × 54 mm with 23 parts on 20 nets, routed with 202 tracks and 18 vias.
Its parts include 15 connectors, 6 resistors and 2 ICs.
Parts
23| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 0 | Resistors_SMD:R_0805_HandSoldering | R3, R4, R5, R6 |
| 2 | 4.7k | Resistors_THT:R_Axial_DIN0414_L11.9mm_D4.5mm_P5.08mm_Vertical | R1, R2 |
| 1 | 1bitsy-complete | 1bitsy:1bitsy | U2 |
| 1 | 1bitsy_convertor | 1bitsy_convertor_footprints:1bitsy_convertor_pitch2.54mm | U1 |
| 1 | AIO_0 | Pin_Headers:Pin_Header_Straight_1x01_Pitch2.54mm | J4 |
| 1 | AIO_1 | Pin_Headers:Pin_Header_Straight_1x01_Pitch2.54mm | J10 |
| 1 | AIO_2 | Pin_Headers:Pin_Header_Straight_1x01_Pitch2.54mm | J5 |
| 1 | AIO_3 | Pin_Headers:Pin_Header_Straight_1x01_Pitch2.54mm | J9 |
| 1 | GND | Pin_Headers:Pin_Header_Straight_1x01_Pitch2.54mm | J7 |
| 1 | I2C_SCL | Pin_Headers:Pin_Header_Straight_1x01_Pitch2.54mm | J13 |
| 1 | I2C_SDA | Pin_Headers:Pin_Header_Straight_1x01_Pitch2.54mm | J11 |
| 1 | PWR_3.3 | Pin_Headers:Pin_Header_Straight_1x01_Pitch2.54mm | J3 |
| 1 | PWR_5V | Pin_Headers:Pin_Header_Straight_1x01_Pitch2.54mm | J6 |
| 1 | SPI_MISO | Pin_Headers:Pin_Header_Straight_1x01_Pitch2.54mm | J8 |
| 1 | SPI_MOSI | Pin_Headers:Pin_Header_Straight_1x01_Pitch2.54mm | J2 |
| 1 | SPI_SCK | Pin_Headers:Pin_Header_Straight_1x01_Pitch2.54mm | J1 |
| 1 | SPI_SCS | Pin_Headers:Pin_Header_Straight_1x01_Pitch2.54mm | J15 |
| 1 | USART_RX | Pin_Headers:Pin_Header_Straight_1x01_Pitch2.54mm | J14 |
| 1 | USART_TX | Pin_Headers:Pin_Header_Straight_1x01_Pitch2.54mm | J12 |
Questions
How big is the 1bitsy convertor PCB?
It measures 43.8 × 54 mm and has 2 copper layers, 1.6 mm thick.
What parts does the 1bitsy convertor use?
23 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 1bitsy convertor KiCad files?
From the rmemory/generic_sensors repository on GitHub, at the commit this page was made from: the board is 1bitsy_convertor/1bitsy_convertor.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the 1bitsy convertor design in my own project?
Its repository states no licence, so its author keeps all rights: ask rmemory before reusing the design.
Similar boards
- 2 layers14 × 100 mm
Yunomi
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
23 parts3kApache-2.0 - 2 layers50.8 × 52.2 mm
- 2 layers138.8 × 89.8 mm
- 2 layers32.9 × 53.3 mm
- 2 layers35.5 × 50 mm
- 2 layers19 × 19 mm
- 2 layers88.5 × 28 mm
ExpBreakout
Duet3D/Duet-2-Hardware
The KiCAD source for the Duet 3d printer controller see www.duet3d.com
23 parts258