
Hex Oscilloscope
HexFud/stm32-fpga-oscilloscope
A 1-Channel 20MHz 100MS/s Mixed-Signal Digital Storage Oscilloscope on a custom 4-layer PCB. Powered by STM32H7, Lattice iCE40 FPGA, and USB-C

hard- and firmware for a rp2350 sfp module interface
Pico sfp is an open-source printed circuit board by rm-1n, from the rm-1n/pico-sfp repository on GitHub. It is a 4-layer board of 85 × 54 mm with 126 parts on 106 nets, routed with 1,220 tracks and 294 vias.
It is built around the RP2350A, RTL8213B-CG and TPS62130RGT, with the W25Q128JVPIQ, LAN8720A-CP and TPD2EUSB30DRT among its other parts. Its parts include 50 capacitors, 44 resistors, 6 ICs, 4 connectors and 3 inductors. It belongs with the RP2040 and RP2350 boards of this library.
hardware project intended to connect a RP2350 to any network medium out there

| Qty | Value | Footprint | References |
|---|---|---|---|
| 30 | 0.1u | Capacitor_SMD:C_0402_1005Metric | C3, C10, C12, C16, C17, C18, C19, C24, C27, C28, C30, C31, C32, C33, C34, C35 +14 |
| 7 | 4.7k | Resistor_SMD:R_0402_1005Metric | R27, R28, R29, R30, R31, R32, R33 |
| 6 | 1k | Resistor_SMD:R_0402_1005Metric | R2, R6, R7, R19, R22, R23 |
| 5 | 10k | Resistor_SMD:R_0402_1005Metric | R35, R36, R37, R38, R39 |
| 5 | 4.7u | Capacitor_SMD:C_0402_1005Metric | C1, C2, C8, C11, C15 |
| 4 | 10 | Resistor_SMD:R_0402_1005Metric | R15, R16, R17, R18 |
| 4 | 10u | Capacitor_SMD:C_0402_1005Metric | C29, C40, C42, C45 |
| 4 | 1mm | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2, TP3, TP4 |
| 4 | 33 | Resistor_SMD:R_0402_1005Metric | R1, R12, R13, R14 |
| 4 | 33n | Capacitor_SMD:C_0402_1005Metric | C22, C23, C25, C26 |
| 4 | 50 | Resistor_SMD:R_0402_1005Metric | R20, R24, R25, R26 |
| 4 | M3 | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2, H3, H4 |
| 3 | BLM21P | Inductor_SMD:L_0805_2012Metric | FB1, FB2, FB3 |
| 2 | 100 | Resistor_SMD:R_0402_1005Metric | R40, R41 |
| 2 | 15p | Capacitor_SMD:C_0402_1005Metric | C13, C14 |
| 2 | 22u | Capacitor_SMD:C_0603_1608Metric | C48, C49 |
| 2 | 27 | Resistor_SMD:R_0402_1005Metric | R5, R8 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R9, R10 |
| 1 | 0 | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | 1.0u | Capacitor_SMD:C_0402_1005Metric | C20 |
| 1 | 1.5k | Resistor_SMD:R_0402_1005Metric | R11 |
| 1 | 100k | Resistor_SMD:R_0402_1005Metric | R42 |
| 1 | 12.1k | Resistor_SMD:R_0402_1005Metric | R21 |
| 1 | 1367073-1 | lib:1367073-1 | J3 |
| 1 | 2.2uH | Inductor_SMD:L_0603_1608Metric | L2 |
| 1 | 2.2uH | Inductor_SMD:L_Changjiang_FNR4020S | L3 |
| 1 | 2.49k | Resistor_SMD:R_0402_1005Metric | R34 |
| 1 | 2227023-1 | lib:2227023-1 | J4 |
| 1 | 24 kΩ | Resistor_SMD:R_0402_1005Metric | R44 |
| 1 | 3.3n | Capacitor_SMD:C_0402_1005Metric | C47 |
| 1 | 3.3u | Inductor_SMD:L_0603_1608Metric | L1 |
| 1 | 470p | Capacitor_SMD:C_0402_1005Metric | C21 |
| 1 | 75 kΩ | Resistor_SMD:R_0402_1005Metric | R43 |
| 1 | ABM8-272-T3 (12Mhz) | Crystal:Crystal_SMD_Abracon_ABM8G-4Pin_3.2x2.5mm | Y1 |
| 1 | ASE-25MHz | Crystal:Crystal_SMD_Abracon_ABM8G-4Pin_3.2x2.5mm | Y3 |
| 1 | ASE-50MHz | Crystal:Crystal_SMD_Abracon_ABM8G-4Pin_3.2x2.5mm | Y2 |
| 1 | DNP | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | LAN8720A | Package_DFN_QFN:VQFN-24-1EP_4x4mm_P0.5mm_EP2.5x2.5mm_ThermalVias | U4 |
| 1 | RP2350A | Package_DFN_QFN:QFN-60-1EP_7x7mm_P0.4mm_EP3.4x3.4mm | U2 |
| 1 | RTL8213B | Package_DFN_QFN:QFN-40-1EP_5x5mm_P0.4mm_EP3.6x3.6mm | U5 |
| 1 | TAG_CONNECT | Connector:Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_Vertical | J1 |
| 1 | TPD2EUSB30 | Package_TO_SOT_SMD:Texas_DRT-3 | U3 |
| 1 | TPS62130 | Package_DFN_QFN:VQFN-16-1EP_3x3mm_P0.5mm_EP1.68x1.68mm_ThermalVias | U6 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J2 |
| 1 | W25Q128JVP | Package_SON:WSON-8-1EP_6x5mm_P1.27mm_EP3.4x4.3mm | U1 |
The 121 most common of 126 parts.

HexFud/stm32-fpga-oscilloscope
A 1-Channel 20MHz 100MS/s Mixed-Signal Digital Storage Oscilloscope on a custom 4-layer PCB. Powered by STM32H7, Lattice iCE40 FPGA, and USB-C


mikesmitty/rp24-dcc-decoder
DIY DCC decoder for model railroad locomotives in an E24 form factor, powered by an RP2350 (Raspberry Pi Pico 2)

James-Livesey/ORGNET
A wireless networking peripheral for the Psion Organiser II, in a datapack form factor.


sequoia-hope/ultraroute
PCB autorouting experiments around copperroute: route jobs, leaderboards, board morphing

SorenGilkeyJohnson/iCEPico
A custom dev board based on the RP2350 microcontroller and the ICE40UP5K-SG48I FPGA.

Les-opossums/ELE_PAMI_2027
This repository contains the hardware design files for the PAMI2027A1 PCB (Rev A1), designed using KiCad 10.
It measures 85 × 54 mm and has 4 copper layers, 1.6 mm thick.
126 parts, built around the RP2350A, RTL8213B-CG, TPS62130RGT and W25Q128JVPIQ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the rm-1n/pico-sfp repository on GitHub, at the commit this page was made from: the board is hardware/pico-sfp/pico-sfp.kicad_pcb and its schematic hardware/pico-sfp/RTL8213B.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask rm-1n before reusing the design.