
Ssd1332-27pin breakout
rleh/random-pcbs
Some devboards I happend to design and wanted to share...

Some devboards I happend to design and wanted to share...
Mcp7941x devboard is an open-source printed circuit board by rleh, from the rleh/random-pcbs repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 47 × 20 mm with 10 parts on 8 nets, routed with 52 tracks and 27 vias.
It is built around the SC32S-7PF20PPM. Its parts include 3 capacitors, 2 resistors, 1 IC, 1 connector and 1 crystal. It belongs with the microcontroller boards boards of this library.
Some devboards I happed to design and wanted to share...

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 4k7 | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | 7pF | Capacitor_SMD:C_0603_1608Metric | C2, C3 |
| 1 | 100nF | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | Keystone 1058 | Battery:BatteryHolder_Keystone_1058_1x2032 | BT1 |
| 1 | MCP7940N-xMS | Package_SO:MSOP-8_3x3mm_P0.65mm | U1 |
| 1 | MFP | TestPoint:TestPoint_THTPad_D1.5mm_Drill0.7mm | TP1 |
| 1 | SC32S-7PF20PPM | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |

rleh/random-pcbs
Some devboards I happend to design and wanted to share...

rleh/random-pcbs
Some devboards I happend to design and wanted to share...


VTC-WISDOM/node_hardware
Schematic/PCB designs for WiSDOM nodes, also includes a few other related hardware projects

brendose/stm32_bluet_pill
This project is a 1.8V STM32WB55 Bluetooth Module with battery charging. The purpose of this project is to provide a development platform for mobile wearable devices.


usimd/window-sensor
BLE window sensor — nRF54L10 + BTHome v2 for Home Assistant



It measures 47 × 20 mm and has 2 copper layers, 1.6 mm thick.
10 parts, built around the SC32S-7PF20PPM. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the rleh/random-pcbs repository on GitHub, at the commit this page was made from: the board is mcp7941x-devboard/mcp7941x-devboard.kicad_pcb and its schematic ssd1332-27pin-breakout/boost.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).