2 layers18.3 × 51.3 mm
2 layers24.1 × 51.3 mm
Devboard edgerail
rjhsun/stm32f0-devboard1A minimal development board featuring an STM32F030C8T6
- Size
- 24.1 × 51.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 48
- Nets
- 48
- Pads
- 165
- Tracks, vias
- 480, 54
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 16 Jul 2020
- Updated
- 25 Dec 2020
Overview
Devboard edgerail is an open-source printed circuit board by rjhsun, from the rjhsun/stm32f0-devboard repository on GitHub, published under the MIT licence. It is a 2-layer board of 24.1 × 51.3 mm with 48 parts on 48 nets, routed with 480 tracks and 54 vias.
It is built around the STM32F030C8T6 and TS-1187A-C-C-B. Its parts include 11 capacitors, 7 resistors, 3 connectors, 2 diodes and 2 switches. It belongs with the microcontroller boards boards and the STM32 boards of this library.
Main components
2
STM32F030C8T6
LQFP-48(7x7)-40℃~+85℃ 12bit 2.4V~3.6V 32 Bit 39 48MHz 64KB 8KB ARM Cortex-M0 Built-in FLASH LQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)
TS-1187A-C-C-B
SMD-4P,5.1x5.1mm-30℃~+85℃ 1.7mm 100,000 cycles 12V 2.6N 5.1mm 5.1mm 50mA Gold No Round Button SPST Surface Mount,Vertical Without Bracket SMD-4P,5.1x5.1mm Tactile Switches ROHSXKB ConnectionTactile Switches
README
README.mdstm32f0-devboard
A minimal development board featuring an STM32F030C8T6
Description
This is a minimal development board for STM32F0xxC MCUs designed for ease of turnkey assembly by JLCPCB Co. Ltd. The board includes HSE and LSE oscillators, reset and user button, power and user LED, BOOT0 boot mode select solder jumper, and a SWD programming header. All components, sans connectors, can be assembled by JLCPCB, and tooling holes for the SMT assembly process are provided.
Licensing
This project is released under the terms of the MIT License.
Parts
48| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C2, C3, C10, C11 |
| 4 | 10K | Resistor_SMD:R_0402_1005Metric | R1, R2, R3, R4 |
| 2 | 18pF | Capacitor_SMD:C_0402_1005Metric | C8, C9 |
| 2 | 33pF | Capacitor_SMD:C_0402_1005Metric | C6, C7 |
| 2 | PinHeader_0.1_01x20 | Connector_PinHeader_2.54mm:PinHeader_1x20_P2.54mm_Vertical | J1, J2 |
| 2 | TS-1187A-C-C-B | timekey:SW_Push_PTS526 | SW1, SW2 |
| 1 | 100 | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | 10nF | Capacitor_SMD:C_0402_1005Metric | C4 |
| 1 | 1uF | Capacitor_SMD:C_0402_1005Metric | C5 |
| 1 | 32.768kHz | timekey:Crystal_Q13FC1350000400 | Y2 |
| 1 | 330 | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C1 |
| 1 | 510 | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 8MHz | timekey:Crystal_X50328MSB2GI | Y1 |
| 1 | BLUE | LED_SMD:LED_0805_2012Metric | D2 |
| 1 | PinHeader_0.1_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | RED | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | SJ3 | timekey:SolderJumper-3_P1.3mm_Bridged12_Pad1.0x1.5mm_NoMark | JP1 |
| 1 | STM32F030C8T6 | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
The 29 most common of 48 parts.
More from rjhsun/stm32f0-devboard
1Similar boards
- 4 layers336.7 × 281.1 mm
- 4 layers45.5 × 66.7 mm
Sunshine pcb rounded
Nv7-GitHub/sunshine
The source code and PCB design for my melty brain combat robot, Sunshine!
54 parts1 - 2 layers25.9 × 56.4 mm
RSTM32F030C8T6
r-pv/rSTM32F030C8T6_ProMiniPlus
An ST development board based on the STM32F030C8T6 MCU compatible with STM32Duino (Arduino).
27 parts14GPL-3.0 - 2 layers77.5 × 42.3 mm
- 4 layers60 × 73.5 mm
Anthracite bottom
trope-oshw/anthracite
MIDI-controllable fuzz pedal: open hardware (CERN-OHL-S-2.0), firmware (GPL-3.0-or-later)
224 parts5CERN-OHL-S-2.0 - 4 layers52.1 × 40.7 mm
- 4 layers61.2 × 54.5 mm
CentralCommand
AlanFord/CentralCommand
Central Command pcb for the Contextual Electronics class
69 parts - 2 layers64 × 100 mm
Questions
How big is the Devboard edgerail PCB?
It measures 24.1 × 51.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Devboard edgerail use?
48 parts, built around the STM32F030C8T6 and TS-1187A-C-C-B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Devboard edgerail KiCad files?
From the rjhsun/stm32f0-devboard repository on GitHub, at the commit this page was made from: the board is devboard/devboard-edgerail.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Devboard edgerail design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).