2 layers159 × 100 mm
2 layers71 × 71 mm
Kc3-2019-Remo
ritscc/IRKit2KC3-2019 RCC勉強会
- Size
- 71 × 71 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 34
- Nets
- 66
- Pads
- 145
- Tracks, vias
- 316, 26
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 28 Aug 2019
- Updated
- 8 Sep 2019
Overview
Kc3-2019-Remo is an open-source printed circuit board by ritscc, from the ritscc/IRKit repository on GitHub, published under the MIT licence. It is a 2-layer board of 71 × 71 mm with 34 parts on 66 nets, routed with 316 tracks and 26 vias.
It is built around the ESP32-WROOM-32, AMS1117-3.3 and BS170, with the NDS9936 among its other parts. Its parts include 10 resistors, 6 capacitors, 4 ICs, 3 diodes and 3 switches. It belongs with the ESP32 boards of this library.
Main components
4
ESP32-WROOM-32
SMD,18x25.5mm-40℃~+85℃ -98dBm 2.4GHz 2.7V~3.6V 20dBm Bluetooth4.2 ESP32-DOWDQ6 UART、SDIO、SPI、I2C、GPIO、PWM、ADC、DAC SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
BS170
TO-92-55℃~+150℃ 1 N-channel 1.2Ω@10V 17pF 2.1V 24pF 500mA 60V 7pF 830mW N-Channel TO-92 MOSFETs ROHSonsemiMOSFETs
NDS9936
SOIC-8-55℃~+150℃ 185pF 2 N-Channel 2W 30V 315pF 35nC@10V 3V 50mΩ@10V 525pF 5A N-Channel SOIC-8 MOSFETs ROHSonsemiMOSFETs
README
README.mdIRKit
KC3 2019 RCC勉強会 IRKit 基板設計データ
Dependency
FootPrint
Setup
git clone git@github.com:ritscc/IRKit.git- Log in snapeda
- Download & unzip ZX62-B-PA(33), BS170 FootPront to IRKit project directory
./IRKit/
License
This software is released under the MIT License, see LICENSE.
Authors
RCC
Parts
34| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 0.1u | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C4, C5, C6, C7 |
| 2 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3, R8 |
| 2 | 22 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R10 |
| 1 | 1 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4 |
| 1 | 10k | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R9 |
| 1 | 22u | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C2 |
| 1 | 24k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5 |
| 1 | 2k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 4.7k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R7 |
| 1 | 47k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R6 |
| 1 | 47u | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | BS170 | BS170:TO92 | Q1 |
| 1 | CP2102-GMR_NRND | digikey-footprints:VFQFN-28-1EP_5x5mm | U4 |
| 1 | ESP32-WROOM-32 | RF_Module:ESP32-WROOM-32 | U2 |
| 1 | FLASH_SW | AKI-PARTS:TVBP06-B043CX-B | SW1 |
| 1 | GREEN_LED | LED_THT:LED_D5.0mm | D3 |
| 1 | LED | LED_SMD:LED_1206_3216Metric | D1 |
| 1 | LOGO | kc3_logo:kc3_logo | G*** |
| 1 | NDS9936 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | Q2 |
| 1 | OSI5FU5111C-40 | LED_THT:LED_D5.0mm | D2 |
| 1 | OSRB38C9AA | OptoDevice:Vishay_MOLD-3Pin | U3 |
| 1 | RST_SW | AKI-PARTS:TVBP06-B043CX-B | SW2 |
| 1 | USB_B_Micro | ZX62-B-5PA_33_:HRS_ZX62-B-5PA(33) | J1 |
| 1 | USER_SW | AKI-PARTS:TVBP06-B043CX-B | SW3 |
The 30 most common of 34 parts.
Questions
How big is the Kc3-2019-Remo PCB?
It measures 71 × 71 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Kc3-2019-Remo use?
34 parts, built around the ESP32-WROOM-32, AMS1117-3.3, BS170 and NDS9936. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Kc3-2019-Remo KiCad files?
From the ritscc/IRKit repository on GitHub, at the commit this page was made from: the board is KiCad/kc3-2019-Remo.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Kc3-2019-Remo design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers85 × 35 mm
- 2 layers71.1 × 24.1 mm
Dactyl manuform gimbal
sffubs/dactyl_manuform_gimbal
Instrutions and designs for building the dactyl-manuform-gimbal keyboard
20 parts57 - 2 layers35 × 130 mm
- 2 layers82.5 × 48 mm
DetectorInundacionPilas-001
iinjdpa/detector_inundacion
Detector de inundacion con ESP8266 usando pilas
33 parts1GPL-3.0 - 4 layers99.2 × 98.9 mm
Micromouse kicad
tadzio8425/Micromouse
Micromouse developed by the IEEE Robotics and Automation Society chapter of the Universidad de Los Andes, Bogotá (2023-2024).
102 partsMIT - 2 layers137 × 89 mm
OVHD Mainboard
stefanofinetti/MF_OverHead_Panel
Complete project for the Airbus A319/320/321/330 OverHead Panel
127 parts5GPL-3.0 - 2 layers90 × 76.5 mm
