
Frothfet
hoeken/frothfet
Yarrboard load controller board with current sense, volt sense, fuses, and sender support.

PCB and schematic design files for the RBPS hardware project.
RBPS is an open-source printed circuit board by riteshsalikeripatil, from the riteshsalikeripatil/Battery_Management_System repository on GitHub. It is a 4-layer board of 100 × 80 mm with 98 parts on 83 nets, routed with 556 tracks and 105 vias.
It is built around the BSC010N04LS, NCP18XH103F03RB and XT90PW-F. Its parts include 48 resistors, 27 capacitors, 7 diodes, 4 transistors and 3 connectors. It belongs with the STM32 boards of this library.
PCB and schematic design files for the RBPS hardware project.
RBPS/
├── hardware/
│ ├── RBPS.kicad_pro
│ ├── pcb/
│ │ └── RBPS.kicad_pcb
│ ├── schematic/
│ │ └── RBPS.kicad_sch
│ ├── custom-libraries/
│ │ ├── symbols/
│ │ ├── footprints/
│ │ └── 3d-models/
│ ├── custom-esp/
│ └── backups/
├── manufacturing/
│ ├── gerbers/
│ └── drill/
├── docs/
├── .gitignore
├── LICENSE
└── README.mdhardware/RBPS.kicad_pro - KiCad project configurationhardware/pcb/RBPS.kicad_pcb - PCB layouthardware/schematic/RBPS.kicad_sch - electrical schematicThe repository includes custom KiCad symbols, footprints and STEP models used by the design. Keeping these inside the repository makes the project easier to reproduce on another computer.
The manufacturing/ folders are intentionally included for future Gerber and drill exports. Generate the final fabrication files from the verified KiCad PCB before sending the board for manufacturing.
hardware/RBPS.kicad_pro.Do not commit KiCad temporary files, local preferences, caches, editor history, or large collections of automatic backups. The repository keeps only the design source files and required custom assets.
This repository contains the PCB design source package prepared for version control. Manufacturing outputs should be added only after the design is finalized and verified.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 25 | 100 | Resistor_SMD:R_0201_0603Metric | R1, R2, R3, R10, R11, R12, R13, R14, R18, R19, R25, R26, R27, R28, R29, R30 +9 |
| 14 | 0.1u | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14 |
| 13 | 100 | Resistor_SMD:R_1206_3216Metric | R34, R35, R36, R37, R38, R39, R40, R41, R42, R43, R44, R45, R46 |
| 5 | 0.1u | Capacitor_SMD:C_0201_0603Metric | C19, C20, C21, C23, C26 |
| 5 | 1k | Resistor_SMD:R_0201_0603Metric | R15, R17, R23, R24, R33 |
| 4 | BSC010N04LS | BSC010N04LS:INF-PG-TDSON-8-FL | Q1, Q2, Q4, Q5 |
| 4 | D_Zener | Diode_SMD:D_SOD-128 | D3, D4, D5, D6 |
| 3 | 0.22u | Capacitor_SMD:C_0201_0603Metric | C15, C16, C17 |
| 2 | 4.7k | Resistor_SMD:R_0201_0603Metric | R20, R21 |
| 2 | NCP18XH103F03RB | NCP18XH103F03RB:THRMC1608X95N | RT1, RT2 |
| 1 | 100 | Capacitor_SMD:C_0805_2012Metric | R47 |
| 1 | 100nF | Capacitor_SMD:C_0805_2012Metric | C24 |
| 1 | 100pF | Capacitor_SMD:C_0201_0603Metric | C27 |
| 1 | 10k | Resistor_SMD:R_0201_0603Metric | R22 |
| 1 | 1m | Resistor_SMD:R_Shunt_Vishay_WSK2512_6332Metric_T2.21mm | R16 |
| 1 | 1u | Capacitor_SMD:C_0805_2012Metric | C18 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric | C25 |
| 1 | 1u | Capacitor_SMD:C_0201_0603Metric | C22 |
| 1 | BAT+ | TestPoint:TestPoint_Pad_2.5x2.5mm | TP1 |
| 1 | BAT- | TestPoint:TestPoint_Pad_2.5x2.5mm | TP5 |
| 1 | BQ76940DBT | Package_SO:TSSOP-44_4.4x11.2mm_P0.5mm | U1 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_1.00mm:PinHeader_1x04_P1.00mm_Horizontal | J3 |
| 1 | Conn_01x14_Socket | Connector_JST:JST_EH_S14B-EH_1x14_P2.50mm_Horizontal | J1 |
| 1 | D_TVS | Diode_SMD:D_SMB | D7 |
| 1 | FAULT LED | LED_SMD:LED_0201_0603Metric | D2 |
| 1 | Fuse | Fuse:Fuse_2920_7451Metric | F2 |
| 1 | PACK+ | TestPoint:TestPoint_Pad_2.5x2.5mm | TP3 |
| 1 | PACK- | TestPoint:TestPoint_Pad_2.5x2.5mm | TP4 |
| 1 | PWR LED | LED_SMD:LED_0201_0603Metric | D1 |
| 1 | STM32C011D6Yx | Package_CSP:ST_WLCSP-12_1.7x1.42mm_Layout4x6_P0.35mm_Stagger | U2 |
| 1 | XT90PW-F | XT90PW-F:AMASS_XT90PW-F | J2 |

hoeken/frothfet
Yarrboard load controller board with current sense, volt sense, fuses, and sender support.

NicholasKorth/BedCooler
A dual-zone heating and cooling controller for a bed: a 6-layer KiCad board with an STM32G474 real-time controller and a Raspberry Pi Compute Module 5 host.


bruk-io/pcb-route
A fast autorouter for KiCad boards that, above all, reroutes incrementally: given the previous route, it keeps what an edit left standing and routes again only what the edit disturbed.




It measures 100 × 80 mm and has 4 copper layers, 1.74 mm thick.
98 parts, built around the BSC010N04LS, NCP18XH103F03RB and XT90PW-F. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the riteshsalikeripatil/Battery_Management_System repository on GitHub, at the commit this page was made from: the board is hardware/pcb/RBPS.kicad_pcb and its schematic hardware/custom-esp/custom_ESP.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask riteshsalikeripatil before reusing the design.