2 layers96.6 × 82.8 mm
2 layers102.5 × 71 mm
Starbie PCB
rishishetty/Halflife-ProjectHalf Life Project Artifacts
- Size
- 102.5 × 71 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 9
- Nets
- 30
- Pads
- 54
- Tracks, vias
- 68, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 7 Oct 2026
- Updated
- 12 Oct 2026
Overview
Starbie PCB is an open-source printed circuit board by rishishetty, from the rishishetty/Halflife-Project repository on GitHub. It is a 2-layer board of 102.5 × 71 mm with 9 parts on 30 nets, routed with 68 tracks and 0 vias.
It is built around the DHT11. Its parts include 2 ICs, 2 connectors, 2 switches and 1 resistor. It belongs with the ESP32 and RISC-V boards of this library.
Main components
1README
Readme.mdThis is Week1 project of hacklife : Starbie Project design has been completed in Kicad with Schematic drawings PCB update from schematic PCB routingEdge cuts All gerber files and Drill files are generated
Parts
9| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | SW_Push | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW1, SW2 |
| 1 | 10K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
| 1 | Conn_01x04_Pin | Imported Parts:Display_128x64_096_I2C | J1 |
| 1 | Conn_01x08_Pin | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J2 |
| 1 | DHT11 | Sensor:Aosong_DHT11_5.5x12.0_P2.54mm | U2 |
| 1 | LOGO | Image:StarfishLogo_10x10mm | G*** |
| 1 | LOGO | Image:RIOLogo | G*** |
| 1 | XIAO-ESP32-C3-SMD | Imported Parts:XIAO-ESP32-C3-SMD | U1 |
Questions
How big is the Starbie PCB PCB?
It measures 102.5 × 71 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Starbie PCB use?
9 parts, built around the DHT11. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Starbie PCB KiCad files?
From the rishishetty/Halflife-Project repository on GitHub, at the commit this page was made from: the board is Starbie_PCB.kicad_pcb and its schematic Starbie_PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Starbie PCB design in my own project?
Its repository states no licence, so its author keeps all rights: ask rishishetty before reusing the design.
Similar boards
- 2 layers100 × 50 mm
Conveyor belt pcb
lansidev/conveyor-belt
Miniature 3D printed conveyor belt for simulation and fun working with sensors, all controllable with Raspberry Pi
22 parts9MIT - 2 layers93 × 20 mm
- 2 layers
OpenMQTTGatewayPCB
ebrithiljonas/OMG_PCB
All in One PCB for the OpenMQTTGateway Project
36 parts7GPL-3.0 - 2 layers62 × 19.3 mm
SniffingTrinket
GeorgK/SniffingTrinket
A room climate monitor using the Adafruit Trinket Pro
23 parts6GPL-3.0 - 2 layers
Arduino relay
bhaskar9980/Guardian
Guardian is an advanced, fully automated hydroponics system designed to optimize plant growth and maximize yield.
58 parts5MIT - 2 layers100 × 43.5 mm
Firefly
Twistx77/Firefly
Open WIFI-enabled RGB lamp with temperature, humidity, suspended air particles and eCO2 sensors.
33 parts5GPL-3.0 - 2 layers30.5 × 77.5 mm
Proyecto sensor temperatura
unla-investigacion-desarrollo/ecosistema-iot
Antes de desarrollar el sistema final, realizamos una etapa de exploración donde investigamos y experimentamos con las siguientes tecnologías:
8 parts5