2 layers243.9 × 136.5 mm
Barobord
sadekbaroudi/barobord
I have spent a lot of time and money designing prototypes, testing, developing, etc. Any contributions would be greatly appreciated!
157 parts57
2 layers102 × 40 mm
Ieee pcb workshop
RioBlumenthal/IEEE-LED-PCBPCP Heart from IEEE workshop
- Size
- 102 × 40 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 37
- Nets
- 61
- Pads
- 169
- Tracks, vias
- 261, 31
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 9 Aug 2024
- Updated
- 9 Aug 2024
Overview
Ieee pcb workshop is an open-source printed circuit board by RioBlumenthal, from the RioBlumenthal/IEEE-LED-PCB repository on GitHub. It is a 2-layer board of 102 × 40 mm with 37 parts on 61 nets, routed with 261 tracks and 31 vias.
It is built around the ATMEGA32U4-AU and SK6812MINI-E. Its parts include 16 diodes, 6 capacitors, 6 resistors, 4 connectors and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2
ATMEGA32U4-AU
QFP-44(10x10)-40℃~+85℃ 10bit 16MHz 1KB 2.5KB 2.7V~5.5V 26 32KB 8 Bit AVR Built-in FLASH QFP-44(10x10) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
SK6812MINI-E
SMD-40℃~+85℃ 0.6mA 1.78mm 120mcd~240mcd 120° 160mcd~320mcd 1kHz 2.8mm 2000V 3.2mm 3.7V~5.5V 460nm~470nm 515nm~525nm 620nm~625nm 800Kbit/s 815mcd~1275mcd Semi-transparent lens SMD RGB LEDs(Built-in IC) ROHSOPSCO OptoelectronicsRGB LEDs(Built-In IC)
README
README.mdIEEE-LED-PCB
PCP Heart from IEEE workshop
Parts
37| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | SK6812MINI | LED_SMD:LED_SK6812MINI_PLCC4_3.5x3.5mm_P1.75mm | D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15, D16 |
| 2 | 100 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 2 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C6 |
| 2 | 22 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4 |
| 2 | 22pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C4 |
| 2 | Conn_01x10 | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J1, J2 |
| 2 | LOGO | LOGO | G***, G*** |
| 1 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5 |
| 1 | 100uF | Capacitor_SMD:CP_Elec_5x5.3 | C1 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
| 1 | 16MHz | Crystal:Crystal_SMD_5032-2Pin_5.0x3.2mm | Y1 |
| 1 | 470 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6 |
| 1 | ATmega32U4-A | Package_QFP:TQFP-44_10x10mm_P0.8mm | U1 |
| 1 | ICSP | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J3 |
| 1 | Jumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1 |
| 1 | RX | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2 |
| 1 | TX | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_GCT_USB3076-30-A | J4 |
Similar boards
- 2 layers102 × 40 mm
- 2 layers315.1 × 150.8 mm
- 4 layers286.3 × 133.3 mm
Phnx
sini6a/phnx
PHNX is an ergonomic keyboard featuring 54 MX compatible switches. It is inspired by the Miryoku layout and includes one additional row at the top along with macro keys on both sides.
186 parts4 - 2 layers354.9 × 107.3 mm
- 4 layers432 × 130.9 mm
Kbd
Ralle001/mechanical-keyboard-v1
I left this project because it is very expensive. For me these were the numbers: - PCB for JLCPCB would have cost around 52 USD - Plus all the components (not including the keys) around 170 USD - The keys are not that…
479 parts1 - 4 layers269.8 × 158.8 mm
Mithril
sanfeps/mithril_kb
mithril keyboard, a split keyboard with 4x6 column ortholinear staggered keys and 3 thumb keys.
247 parts1 - 2 layers304.8 × 83.1 mm
Questions
How big is the Ieee pcb workshop PCB?
It measures 102 × 40 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Ieee pcb workshop use?
37 parts, built around the ATMEGA32U4-AU and SK6812MINI-E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ieee pcb workshop KiCad files?
From the RioBlumenthal/IEEE-LED-PCB repository on GitHub, at the commit this page was made from: the board is starter_project/ieee_pcb_workshop.kicad_pcb and its schematic kicad/ieee_pcb_workshop.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ieee pcb workshop design in my own project?
Its repository states no licence, so its author keeps all rights: ask RioBlumenthal before reusing the design.