
Barobord
sadekbaroudi/barobord
I have spent a lot of time and money designing prototypes, testing, developing, etc. Any contributions would be greatly appreciated!

A 75% keyboard PCB, with an accompanying acrylic case files
Asok75 is an open-source printed circuit board by aaronyaosong, from the aaronyaosong/75-Keyboard repository on GitHub. It is a 2-layer board of 315.1 × 150.8 mm with 351 parts on 236 nets, routed with 4,007 tracks and 135 vias.
It is built around the ATMEGA32U4-AU, PRTR5V0U2X and SK6812MINI-E. Its parts include 98 resistors, 91 diodes, 21 capacitors, 2 ICs and 1 transistor. It belongs with the AVR (ATmega, ATtiny) boards of this library.
A 75% keyboard PCB.
A simple acrylic case has also been designed - .dxf files are in the Case folder in the repository.
This PCB is designed to work with QMK firmware (firmware is in my branch of the QMK firmware in the expected location).
A VIA definition has also been created to be able to customise the layout of the keyboard easily.


| Qty | Value | Footprint | References |
|---|---|---|---|
| 90 | 1K | Resistor_SMD:R_0805_2012Metric | R1, R2, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23, R24, R25 +74 |
| 87 | SOD-123 | random-keyboard-parts:D_SOD-123-Pretty | D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23, D24 +71 |
| 76 | MX-LED | MX_Only:MXOnly-1U | MX_-1, MX_,1, MX_;1, MX_.1, MX_'1, MX_/1, MX_#0, MX_#1, MX_#2, MX_#3, MX_#4, MX_#5, MX_#6, MX_#7, MX_#8, MX_#9 +60 |
| 17 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C4, C5, C6, C8, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21 +1 |
| 14 | SK6812MINI | LED_SMD:LED_SK6812MINI_PLCC4_3.5x3.5mm_P1.75mm | RGB1, RGB2, RGB3, RGB4, RGB5, RGB6, RGB7, RGB8, RGB9, RGB10, RGB11, RGB12, RGB13, RGB14 |
| 13 | BreakawayTabs | random-keyboard-parts:breakaway-mousebites | Tab1, Tab2, Tab3, Tab4, Tab5, Tab6, Tab7, Tab8, Tab9, Tab10, Tab11, Tab12, Tab13 |
| 6 | MX-LED | MX_Only:MXOnly-1.25U | MX_CAPS2, MX_LALT1, MX_LCTRL1, MX_LSHIFT2, MX_LWIN1, MX_SPACE4 |
| 5 | MX-LED | MX_Only:MXOnly-1.5U | MX_\1, MX_LALT3, MX_RALT2, MX_RCTRL2, MX_TAB1 |
| 3 | 10K | Resistor_SMD:R_0805_2012Metric | R4, R5, R11 |
| 3 | LED_Small | random-keyboard-parts:LED_D3.0mm-Pretty | D86, D87, D88 |
| 3 | MountingHole | mounting_hole:mounting | H1, H2, H3 |
| 2 | 22 | Resistor_SMD:R_0805_2012Metric | R8, R9 |
| 2 | 22pF | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 2 | 5.1K | Resistor_SMD:R_0805_2012Metric | R6, R7 |
| 2 | MX-LED | MX_Only:MXOnly-1.75U | MX_CAPS1, MX_RSHIFT1 |
| 2 | MX-LED | MX_Only:MXOnly-1.5U-FLIPPED | MX_LALT2, MX_LCTRL2 |
| 2 | MX-LED | MX_Only:MXOnly-2.25U-ReversedStabilizers | MX_ENTER1, MX_SPACE6 |
| 2 | MX-LED | MX_Only:MXOnly-7U-ReversedStabilizers | MX_SPACE2, MX_SPACE3 |
| 1 | 100 | Resistor_SMD:R_0805_2012Metric | R10 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C3 |
| 1 | 16MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric | C7 |
| 1 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | 500mA | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | ATmega32U4-AU | Package_QFP:TQFP-44_10x10mm_P0.8mm | U1 |
| 1 | AVR-ISP-6 | random-keyboard-parts:Reset_Pretty-Mask | J1 |
| 1 | HRO-TYPE-C-31-M-12 | Type-C:HRO-TYPE-C-31-M-12-Assembly | USB1 |
| 1 | LOGO | silkscreen:southerncross-mask | G*** |
| 1 | LOGO | silkscreen:southerncross | G*** |
| 1 | MX-LED | MX_Only:MXOnly-ISO-ROTATED-ReversedStabilizers | MX_ENTER2 |
| 1 | MX-LED | MX_Only:MXOnly-2.25U | MX_LSHIFT1 |
| 1 | MX-LED | MX_Only:MXOnly-6.25U-ReversedStabilizers | MX_SPACE1 |
| 1 | MX-LED | MX_Only:MXOnly-2.75U-ReversedStabilizers | MX_SPACE5 |
| 1 | MX-LED | MX_Only:MXOnly-1U-FLIPPED | MX_LWIN2 |
| 1 | MX-LED | MX_Only:MXOnly-2U | MX_BCKSP1 |
| 1 | PRTR5V0U2X | random-keyboard-parts:SOT143B | U2 |
| 1 | SW_Push | random-keyboard-parts:SKQG-1155865 | SW1 |
| 1 | Schottky | random-keyboard-parts:D_SOD-123-Pretty | D1 |

sadekbaroudi/barobord
I have spent a lot of time and money designing prototypes, testing, developing, etc. Any contributions would be greatly appreciated!


markstory/ursa-minor-keyboard
Design and schematics for the ursaminor keyboard



makenova/reverie
a mini 1800 keyboard based on the Elongate, Clarabelle, and Garbage Truck Keyboards

makenova/micro_redox
A family of boards inspired by the microdox and ferris

It measures 315.1 × 150.8 mm and has 2 copper layers, 1.6 mm thick.
351 parts, built around the ATMEGA32U4-AU, PRTR5V0U2X and SK6812MINI-E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the aaronyaosong/75-Keyboard repository on GitHub, at the commit this page was made from: the board is Asok75.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask aaronyaosong before reusing the design.