4 layers50 × 75.2 mm
RpiFly v3
r3dpath/RpiFly_Hardware
While most of the functionality here has been tested to work theres certainally some marginal design decisions, just beware.
108 parts1
2 layers56.3 × 77 mm
Telescope
Rio6/Telescope- Size
- 56.3 × 77 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 83
- Nets
- 93
- Pads
- 324
- Tracks, vias
- 705, 102
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 28 Apr 2024
- Updated
- 1 Nov 2026
Overview
Telescope is an open-source printed circuit board by Rio6, from the Rio6/Telescope repository on GitHub. It is a 2-layer board of 56.3 × 77 mm with 83 parts on 93 nets, routed with 705 tracks and 102 vias.
It is built around the ESP32-WROOM-32, A5984GLPTR-T and AP62200WU-7-52, with the FT260S-U, MMBT3904 and CUS10S30 among its other parts. Its parts include 28 resistors, 16 capacitors, 6 ICs, 6 diodes and 6 connectors. It belongs with the ESP32 boards of this library.
Main components
7
ESP32-WROOM-32
SMD,18x25.5mm-40℃~+85℃ -98dBm 2.4GHz 2.7V~3.6V 20dBm Bluetooth4.2 ESP32-DOWDQ6 UART、SDIO、SPI、I2C、GPIO、PWM、ADC、DAC SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
A5984GLPTR-T
TSSOP-24-EP-40℃~+105℃ 2 32 640mΩ Bipolar Driver Yes TSSOP-24-EP Stepper Motor Driver ROHSAllegro MicroSystems, LLCStepper Motor Driver
AP62200WU-7-52
TSOT-26-40℃~+85℃@(TA) 1 2A 4.2V~18V 740kHz 800mV~7V Adjustable Buck Buck Built-in Yes TSOT-26 DC-DC Converters ROHSDiodes IncorporatedDC-DC Converters
FT260S-U
TSSOP-28-40℃~+85℃ 1.8V、2.5V、3.3V 24mA USB 2.0 USB to UART、USB to I2C TSSOP-28 USB Converters ROHSFTDIUSB Converters
MMBT3904
SOT-23-55℃~+150℃ 1 NPN 100 100nA 200mA 200mW 300MHz 300mV 40V 6V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)
CUS10S30
SOD-323Schottky DiodesDOWOPDZ3.6B
SOD-3231 Independent 3.6V 3.6V~3.85V 400mW 5uA@1V 90Ω SOD-323 Zener Diodes ROHSNexperiaZener Diodes
Parts
83| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R10, R11, R12, R14, R15, R16, R17, R18, R19, R20, R21, R25, R26, R28 |
| 9 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C3, C4, C5, C7, C8, C14, C15, C16 |
| 5 | 0R4 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3, R4, R6, R7, R23 |
| 4 | MMBT3904 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4 |
| 4 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1, JP2, JP3, JP4 |
| 3 | 22uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C9, C18, C19 |
| 3 | GSLC05B006 | Diode_SMD:D_SOD-323_HandSoldering | D1, D2, D3 |
| 3 | LOGO | LOGO | G***, G***, G*** |
| 3 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2, H3 |
| 2 | 0 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8, R9 |
| 2 | 33R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R5 |
| 2 | A5984GLPTR-T | Package_SO:TSSOP-24-1EP_4.4x7.8mm_P0.65mm_EP3.2x5mm | U1, U2 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R22 |
| 1 | 100uF | Capacitor_THT:C_Radial_D5.0mm_H7.0mm_P2.00mm | C1 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C17 |
| 1 | 12V | PJ-037B:CUI_PJ-037B | J4 |
| 1 | 130 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R13 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C13 |
| 1 | 3.3uH | Inductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | L1 |
| 1 | 31k6 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R24 |
| 1 | 4.7uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6 |
| 1 | AP62200WU-7 | Package_TO_SOT_SMD:TSOT-23-6_HandSoldering | U7 |
| 1 | AUX | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J6 |
| 1 | CUS10S30 | Diode_SMD:D_SOD-323_HandSoldering | D6 |
| 1 | DNP | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R27 |
| 1 | ESP32-WROOM-32 | RF_Module:ESP32-WROOM-32 | U5 |
| 1 | FT260S-U | FT260S_U:TSSOP28_FT260S_FTD-M | U3 |
| 1 | INA180A1 | Package_TO_SOT_SMD:SOT-23-5 | U6 |
| 1 | IO0 | TS04-66-43-BK-160:SW_TS04-66-43-BK-160-SMT | SW2 |
| 1 | LED | LED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D4 |
| 1 | M1 | Connector_JST:JST_PH_S4B-PH-K_1x04_P2.00mm_Horizontal | J2 |
| 1 | M2 | Connector_JST:JST_PH_S4B-PH-K_1x04_P2.00mm_Horizontal | J3 |
| 1 | PDZ3.6B | Diode_SMD:D_SOD-323_HandSoldering | D5 |
| 1 | PWR | R13-66:R13-66 | SW3 |
| 1 | RST | TS04-66-43-BK-160:SW_TS04-66-43-BK-160-SMT | SW1 |
| 1 | R_Potentiometer_US | Potentiometer_SMD:Potentiometer_Bourns_TC33X_Vertical | RV1 |
| 1 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | TP1 |
| 1 | UART | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | USB_B | Connector_USB:USB_B_OST_USB-B1HSxx_Horizontal | J1 |
The 82 most common of 83 parts.
Questions
How big is the Telescope PCB?
It measures 56.3 × 77 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Telescope use?
83 parts, built around the ESP32-WROOM-32, A5984GLPTR-T, AP62200WU-7-52 and FT260S-U. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Telescope KiCad files?
From the Rio6/Telescope repository on GitHub, at the commit this page was made from: the board is sch/telescope.kicad_pcb and its schematic sch/telescope.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Telescope design in my own project?
Its repository states no licence, so its author keeps all rights: ask Rio6 before reusing the design.
Similar boards
- 4 layers90 × 90 mm
StepperMotorBreakout
Smoothieware/Smoothieboard2
Hardware files for the Smoothieboard v2, and extension boards
56 parts71 - 2 layers120 × 151 mm
- 4 layers50 × 65 mm
FeroFlyF405
Ozonised/FeroFlyF405
FeroFlyF405 an open source STM32F405 based flight controller running INAV
150 parts44CERN-OHL-P-2.0 - 2 layers
- 2 layers127 × 53.5 mm
- 4 layers37.8 × 25 mm
- 4 layers88.9 × 58.4 mm
