4 layers39.9 × 57.9 mm
2 layers127 × 53.5 mm
Ir remote
danngreen/ir-remoteHobby project for an IR remote controlled audio board
- Size
- 127 × 53.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 106
- Nets
- 104
- Pads
- 361
- Tracks, vias
- 992, 75
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 7 Dec 2025
- Updated
- 29 May 2026
Overview
Ir remote is an open-source printed circuit board by danngreen, from the danngreen/ir-remote repository on GitHub. It is a 2-layer board of 127 × 53.5 mm with 106 parts on 104 nets, routed with 992 tracks and 75 vias.
It is built around the TLV61046ADBV, AP62200WU-7-52 and TSOP38238, with the USBLC6-2SC6 and NCP51460SN33 among its other parts. Its parts include 42 capacitors, 21 resistors, 9 ICs, 9 connectors and 2 inductors. It belongs with the STM32 boards of this library.
Main components
5
TLV61046ADBV
SOT-23-6-40℃~+125℃@(TJ) 1 1.05MHz 1.8V~5.5V 110uA 3.3V~28V Adjustable Boost Boost Built-in No Overcurrent Protection、Light load efficient mode、Load disconnect SOT-23-6 DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersAP62200WU-7-52
TSOT-26-40℃~+85℃@(TA) 1 2A 4.2V~18V 740kHz 800mV~7V Adjustable Buck Buck Built-in Yes TSOT-26 DC-DC Converters ROHSDiodes IncorporatedDC-DC Converters
TSOP38238
SIP-3-2.54mm-25℃~+85℃ 10mW 2.5V~5.5V 350uA 38kHz 45m ±45° SIP-3-2.54mm Infrared Remote Receiver (IRM) ROHSVishay IntertechnologyInfrared Remote Receiver (IRM)USBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)
NCP51460SN33
SOT-230℃~+100℃ 12uVp-p 18ppm/℃ 18uVrms 20mA 220uA 3.3V 4.2V~28V Fixed Series ±1% SOT-23 Voltage Reference ROHSonsemiVoltage Reference
Parts
106| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | TestPoint | 4ms_TestPoint:TestPoint_WireHole | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8, TP11, TP12, TP13, TP14 |
| 10 | 10uF_0603_10V | 4ms_Capacitor:C_0603 | C5, C10, C11, C13, C15, C27, C28, C29, C30, C40 |
| 7 | 1uF_0603_25V | 4ms_Capacitor:C_0603 | C2, C16, C19, C20, C21, C26, C32 |
| 6 | 0.1uF_0603_16V | 4ms_Capacitor:C_0603 | C1, C3, C9, C12, C14, C33 |
| 5 | 22uF_1206_25V | 4ms_Capacitor:C_1206 | C17, C18, C36, C37, C39 |
| 5 | 33Ω_0603 | 4ms_Resistor:R_0603 | R2, R3, R6, R7, R8 |
| 4 | 100nF_0603_16V | 4ms_Capacitor:C_0603 | C4, C31, C34, C35 |
| 4 | MountingHole | 4ms_Hardware:MountingHole_Screw_3mmHole_5.3mmHead | H1, H2, H3, H4 |
| 3 | 100k_0603 | 4ms_Resistor:R_0603 | R14, R15, R26 |
| 3 | 10uF_0805_25V | 4ms_Capacitor:C_0805 | C6, C38, C303 |
| 3 | Conn_01x02 | 4ms_Connector:Pins_1x02_2.54mm_TH | J1, J2, J8 |
| 2 | 100Ω_0603 | 4ms_Resistor:R_0603 | R13, R16 |
| 2 | 18pF_0603_50V | 4ms_Capacitor:C_0603 | C24, C25 |
| 2 | 1k_0603 | 4ms_Resistor:R_0603 | R10, R11 |
| 2 | 4.7k_0603 | 4ms_Resistor:R_0603 | R9, R12 |
| 2 | 47nF_0603_35V | 4ms_Capacitor:C_0603 | C22, C23 |
| 2 | 47pF_0603_50V | 4ms_Capacitor:C_0603 | C7, C8 |
| 2 | 5.1k_0603 | 4ms_Resistor:R_0603 | R17, R18 |
| 2 | Jack_RCA_Stereo | 4ms_Jack:RCA_Stereo_SwitchCraft-PJRAS2X1S | J5, J7 |
| 2 | NetTie | 4ms_SolderJumper:NetTie-2_SMD_Pad0.16mm_6mil | NT2, NT11 |
| 2 | TLV74018 | 4ms_Package_SOT:SOT-23-5 | U3, U4 |
| 1 | 10.2k_0603 | 4ms_Resistor:R_0603 | R27 |
| 1 | 10k_0603 | 4ms_Resistor:R_0603 | R5 |
| 1 | 10uH_0805_0.5A | 4ms_Resistor:R_0805_2012Metric | L3 |
| 1 | 15k_0603 | 4ms_Resistor:R_0603 | R1 |
| 1 | 16MHz_18pF_FA238 | 4ms_Crystal:FA-238 | X10 |
| 1 | 1uF_0402_25V | 4ms_Capacitor:C_0402 | C300 |
| 1 | 31.6k_0603 | 4ms_Resistor:R_0603 | R25 |
| 1 | 4.7uH_1.2A_40xx | Inductor_SMD:L_Taiyo-Yuden_NR-40xx | L11 |
| 1 | 71.5k_0603 | 4ms_Resistor:R_0603 | R4 |
| 1 | AP62200WU-7 | 4ms_Package_SOT:TSOT-23-6 | V11 |
| 1 | Conn_01x03 | 4ms_Connector:Pins_1x03_2.54mm_TH | J6 |
| 1 | Conn_01x04 | 4ms_Connector:Pins_1x04_2.54mm_TH_SWD | J12 |
| 1 | DRV8210DRLR | Package_TO_SOT_SMD:SOT-563 | U7 |
| 1 | NCP51460SN33 | 4ms_Package_SOT:SOT23-3_PO132 | V12 |
| 1 | Pins_02x04_P2.54mm_SMT | 4ms_Connector:Pins_2x04_P2.54mm_Vertical_SMD | J3 |
| 1 | STM32G431CBTx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | Slider_Dual_Motorized_PSM60-081A-xxx | 4ms_Potentiometer:Slider_Dual_Motorized_PSM60-081A-xxx | POT1 |
| 1 | SolderJumper_2_Open | 4ms_SolderJumper:JUMPER_SMD_1x2 | JP1 |
| 1 | TAR5S33U | 4ms_Package_SOT:SOT-563-5 | U8 |
| 1 | TLV320AIC3204 | Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mm_ThermalVias | U5 |
| 1 | TLV61046ADB | Package_TO_SOT_SMD:SOT-23-6 | U112 |
| 1 | TSOP38238 | OptoDevice:Vishay_MINICAST-3Pin | U2 |
| 1 | USB-C_Receptacle_Molex_2171790001 | 4ms_Connector:USB_C_Receptacle_Molex_2171790001 | J4 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U6 |
Questions
How big is the Ir remote PCB?
It measures 127 × 53.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Ir remote use?
106 parts, built around the TLV61046ADBV, AP62200WU-7-52, TSOP38238 and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ir remote KiCad files?
From the danngreen/ir-remote repository on GitHub, at the commit this page was made from: the board is pcb/ir-remote.kicad_pcb and its schematic pcb/ir-remote.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ir remote design in my own project?
Its repository states no licence, so its author keeps all rights: ask danngreen before reusing the design.
Similar boards
- 4 layers40 × 68 mm
- 2 layers58.7 × 110.9 mm
- 2 layers75.9 × 50.1 mm
Suspension telemetry
porast1/suspension-telemetry
Suspension telemetry system for mountain bike or dirt bike
77 parts14MIT - 4 layers50 × 65 mm
FeroFlyF405
Ozonised/FeroFlyF405
FeroFlyF405 an open source STM32F405 based flight controller running INAV
150 parts44CERN-OHL-P-2.0 - 2 layers
- 4 layers50 × 75.2 mm
RpiFly v3
r3dpath/RpiFly_Hardware
While most of the functionality here has been tested to work theres certainally some marginal design decisions, just beware.
108 parts1 - 4 layers37.8 × 25 mm
