

ESP32 PID Controller
- Size
- 58 × 58 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 10
- Nets
- 39
- Pads
- 60
- Tracks, vias
- 86, 10
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 2 Nov 2023
- Updated
- 1 Feb 2025
Overview
ESP32 PID Controller is an open-source printed circuit board by rifky-af, from the rifky-af/pcb-design repository on GitHub, published under the MIT licence. It is a 2-layer board of 58 × 58 mm with 10 parts on 39 nets, routed with 86 tracks and 10 vias.
It is built around the ESP32-DEVKITC-VE and IRLZ44N. Its parts include 3 ICs, 2 capacitors, 2 connectors, 1 resistor and 1 diode. It belongs with the ESP32 boards of this library.
Main components
2README
README.mdpcb-design
Parts
10| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 0.1 uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C2 |
| 1 | 0.33 uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C1 |
| 1 | 10K | Resistor_THT:R_Axial_DIN0414_L11.9mm_D4.5mm_P15.24mm_Horizontal | R1 |
| 1 | Barrel_Jack_Switch_Pin3Ring | Connector_BarrelJack:BarrelJack_Horizontal | J1 |
| 1 | ESP32-DevKitC | PCM_Espressif:ESP32-DevKitC | U3 |
| 1 | IRLZ44N | Package_TO_SOT_THT:TO-220-3_Vertical | Q1 |
| 1 | LED | LED_THT:LED_D3.0mm | D1 |
| 1 | LM35-LP | Package_TO_SOT_THT:TO-92_Inline | U2 |
| 1 | LM7805_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U1 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J2 |
More from rifky-af/pcb-design
7- 2 layers73.2 × 67.1 mm

- 2 layers40 × 31 mm

- 2 layers95 × 66 mm

- 2 layers61 × 25.4 mm

- 2 layers39 × 25 mm

- 2 layers68.6 × 22.9 mm

- 2 layers53.3 × 25.4 mm

Similar boards
- 2 layers86.9 × 63.7 mm

TTS Design
100-5x/Bullseye-Target-System
The Bullseye Turning Target System was developed for the practical precision pistol shooter. This system compliments Tom Talpey's excellent Bullseye Match app for your phone.
22 parts - 2 layers165 × 110 mm

- 2 layers119.4 × 119.4 mm

Esp32-pool controller
niko34/esp32-pool-controller
Contrôleur automatique de piscine ESP32 avec gestion pH, ORP, température, filtration, éclairage, app web locale, MQTT (HomeAssistant auto-discovery), API
93 partsMIT - 2 layers48.5 × 75 mm

Proiectv2
PaulMiron/esp32-wled-rgb-controller
ESP32 + WLED controller for 12V RGB LED strips with IRLZ44N MOSFETs and IR remote support. KiCad project.
14 partsGPL-2.0 - 2 layers200 × 132.6 mm

- 2 layers103.8 × 50 mm

Galagino pcb set
harbaum/galagino
A Galaga, Pac-Man and Donkey Kong arcade emulator for the ESP32
26 parts558 - 2 layers115 × 75 mm

SpinCoater
RParkerE/OpenSilicon
OpenSilicon enables DIY semiconductor fabrication with open-source guides for building IC equipment at home. The project includes BOMs, 3D files, firmware, and PDKs, supporting makers and researchers in chip fabrication.
11 parts55GPL-3.0 - 2 layers127.3 × 54.1 mm

ESP32 SolarBox
cole8888/SRNE-Solar-Charge-Controller-Monitor
Read data from SRNE solar charge controllers.
34 parts42
Questions
How big is the ESP32 PID Controller PCB?
It measures 58 × 58 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ESP32 PID Controller use?
10 parts, built around the ESP32-DEVKITC-VE and IRLZ44N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ESP32 PID Controller KiCad files?
From the rifky-af/pcb-design repository on GitHub, at the commit this page was made from: the board is ESP32_PID Controller/ESP32_PID Controller.kicad_pcb and its schematic Atiny85_USB/Atiny85_USB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ESP32 PID Controller design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).