Skip to the content
2 layers90 × 45 mmRoboCone1256Type, the printed circuit board in 3D
Size
90 × 45 mm
Copper layers
2
Thickness
1.6 mm
Parts
23
Nets
40
Pads
100
Tracks, vias
149, 6
Pours
31
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
27 Mar 2025
Updated
27 Mar 2025

Overview

RoboCone1256Type is an open-source printed circuit board by RickNYC12345, from the RickNYC12345/RoboConeFinal repository on GitHub. It is a 2-layer board of 90 × 45 mm with 23 parts on 40 nets, routed with 149 tracks and 6 vias.

It is built around the TSR 1-2450E. Its parts include 8 resistors, 8 connectors, 4 capacitors and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

1

Parts

23
QtyValueFootprintReferences
5796683-4796683_4:TE_796683-4J4, J5, J6, J7, J8
4100nFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC1, C2, C3, C4
410kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR3, R5, R7, R9
42.1kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR4, R6, R8, R10
2SSW-108-XX-X-SSAMTEC 8 Position pins:SAMTEC_SSW-108-XX-X-SJ1, J2
1
1282847-2282857_2:TE_282857-2J3
1Arduino_Nano_v3.xArduino_NANO_V3:MODULE_A000005A1
1TSR1-2450EConverter_DCDC:Converter_DCDC_TRACO_TSR1-xxxxE_THTU2

More from RickNYC12345/RoboConeFinal

3

Similar boards

  • 4 layers65 × 70 mmSwr meter, the printed circuit board in 3D

    Swr meter

    F6ITU/vswr_meter

    PD0LEW reflectometer fork

    70 parts3
  • 4 layers80 × 80 mmPICO iot, the printed circuit board in 3D

    PICO iot

    Ayan-nova/Design-of-a-Raspberry-PICO-Iot-Device-on-4-Layer-PCB-Design-With-Sensor-And-More

    Design a Raspberry Pi Pico W-based Industrial IoT Gateway and Edge Controller using Kicad software.

    60 parts1
  • 2 layers57 × 49.7 mmGp2026, the printed circuit board in 3D

    Gp2026

    baloghr/usonic

    KiCad 9 project gp2026 (hardware revision 1.01): schematic, PCB, custom footprints (Library.pretty) and 3D models (packages3D).

    17 parts1
  • 2 layers110.6 × 83.1 mmMain board proto, the printed circuit board in 3D

    Main board proto

    ismailEngineer/omniwheel-robot

    a small protoype to educate the control system of 3 OmniWheel Robot

    35 parts1
  • 2 layers101 × 70 mmHECU, the printed circuit board in 3D

    HECU

    twitch0001/HECU

    v1 - UWEFS HybridCU (Teensy 4.1 Based)

    40 parts1
  • 4 layers99 × 146 mmCarte principale, the printed circuit board in 3D

    Carte principale

    Unimakers/CDR-2027

    Ce repo est un site de documentation réalisé par l'équipe des première et deusième années pré-ingénieur de l'école Unilasalle-Amiens, membre de l'association de robotique Unimaker, dans le cadre de leur participation à…

    156 parts1
  • 2 layers24.2 × 24.1 mmVPC, the printed circuit board in 3D

    VPC

    Archfx/evie

    Camaro6 tweaks

    27 parts
  • 2 layers89 × 72.5 mmAug, the printed circuit board in 3D

    Aug

    augustjf/aug_electrical

    39 parts

Questions

How big is the RoboCone1256Type PCB?

It measures 90 × 45 mm and has 2 copper layers, 1.6 mm thick.

What parts does the RoboCone1256Type use?

23 parts, built around the TSR 1-2450E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the RoboCone1256Type KiCad files?

From the RickNYC12345/RoboConeFinal repository on GitHub, at the commit this page was made from: the board is B. Design/COPIED/RoboCone1256Type/RoboCone1256Type.kicad_pcb and its schematic B. Design/B7 - PCB Layout & Schematics/P_25_0022_A/DESIGN/RoboConeAnalog9_0/RoboConeAnalog9_0.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the RoboCone1256Type design in my own project?

Its repository states no licence, so its author keeps all rights: ask RickNYC12345 before reusing the design.