2 layers100 × 100 mm
Panel
richardeoin/ax
This repository contains hardware and software for the AX5043 and AX5243 radios from AxSemi (now ON Semiconductor). They are probably the same die, but the AX5243 has fewer pins.
342 parts48
2 layers100 × 80 mm
Panel
richardeoin/ax48This repository contains hardware and software for the AX5043 and AX5243 radios from AxSemi (now ON Semiconductor). They are probably the same die, but the AX5243 has fewer pins.
- Size
- 100 × 80 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 118
- Nets
- 115
- Pads
- 351
- Tracks, vias
- 610, 155
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 28 Aug 2016
- Updated
- 6 Apr 2019
Overview
Panel is an open-source printed circuit board by richardeoin, from the richardeoin/ax repository on GitHub. It is a 2-layer board of 100 × 80 mm with 118 parts on 115 nets, routed with 610 tracks and 155 vias.
It is built around the DS2401P+T&R, TPS73433DRV and NX7002AK, with the STTH1L06 among its other parts. Its parts include 30 capacitors, 12 resistors, 12 inductors, 9 diodes and 6 ICs.
Main components
4
DS2401P+T&R
TSOC-6-40℃~+85℃ 1-Wire 2.8V~6V TSOC-6 Security Verification / Encryption ICs ROHSMaxim Integrated (Analog Devices)Security Verification / Encryption ICs
TPS73433DRV
WSON-6-EP(2x2)-40℃~+105℃@(Ta) 1 219mV@(250mA) 250mA 28uVrms 3.3V 44uA 6.5V 60dB@(1kHz) Fixed Over Current Protection、Thermal shutdown、Enable control、Input under-voltage protection、Noise bypass terminal Positive WSON-6-EP(2x2) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
NX7002AK
SOT-23-55℃~+150℃ 1 N-channel 1.33W 2.1V 20pF 300mA 4.5Ω@10V 430pC@4.5V 60V N-Channel SOT-23 MOSFETs ROHSNexperiaMOSFETs
STTH1L06
DO-411 Independent 1.3V@1A 1A 1uA@600V 30A 600V DO-41 Diodes - General Purpose ROHSSTMicroelectronicsDiodes - General Purpose
README
README.mdAX
This repository contains hardware and software for the AX5043 and AX5243 radios from AxSemi (now ON Semiconductor). They are probably the same die, but the AX5243 has fewer pins.
There is hardware for the Raspberry Pi, C.H.I.P. and a 2mm pitch breakout board.
The software has both C and Python APIs, and can be used without the cumbersome Ax-RadioLab GUI tool. Not all features of the radio are supported yet.
Parts
118| Qty | Value | Footprint | References |
|---|---|---|---|
| 36 | drill | rem:drill | , , , , , , , , , , , , , , , +20 |
| 5 | 100nF | agg:0402 | C1, C6, C10, C11, C29 |
| 5 | 10nF | agg:0402 | C7, C21, C22, C28, C30 |
| 5 | 1kΩ | agg:0402 | R5, R7, R9, R11, R12 |
| 5 | 330Ω | agg:0402 | R1, R2, R3, R4, R8 |
| 3 | 22nH | agg:0603 | L1, L2, L3 |
| 3 | 22pF | agg:0402 | C17, C23, C25 |
| 3 | 39pF | agg:0402 | C12, C20, C26 |
| 3 | 56pF | agg:0402 | C13, C14, C24 |
| 2 | 120nH | agg:0603 | L4, L6 |
| 2 | 15nH | agg:0402 | L5, L7 |
| 2 | 1nF | agg:0402 | C2, C3 |
| 2 | 1µF | agg:0402 | C4, C9 |
| 2 | 2.7pF | agg:0402 | C16, C19 |
| 2 | 4.7µF | agg:0402 | C5, C8 |
| 2 | COAX | rem:SMA-EDGE | P2, P3 |
| 2 | CONN_01x02 | Terminal_Blocks:TerminalBlock_Pheonix_PT-3.5mm_2pol | J1, J2 |
| 2 | TVS_DIODE | agg-unchecked:TSLP-2-17 | D8, D9 |
| 1 | 10kΩ | agg:0402 | R10 |
| 1 | 12nH | agg:0603 | L10 |
| 1 | 22nH | agg:0402 | L11 |
| 1 | 39nH | agg:0402 | L8 |
| 1 | 4.7kΩ | agg:0402 | R6 |
| 1 | 47nH | agg:0402 | L12 |
| 1 | 5.1pF | agg:0402 | C18 |
| 1 | 6.8nH | agg:0402 | L9 |
| 1 | 600Ω-1A-0.2DCR | agg:0603 | FB1 |
| 1 | 68pF | agg:0402 | C27 |
| 1 | AX5043 | rem:QFN-28-EP-AX | IC3 |
| 1 | CHIPv1_0 | agg:CHIPv1_0 | IC1 |
| 1 | DATA-ORANGE | rem:1206_LED_REVERSE | D3 |
| 1 | DFLS130L-7 | Diodes_SMD:SOD-123 | D7 |
| 1 | DS2401P | TO_SOT_Packages_SMD:TSOT-6-MK06A | U1 |
| 1 | INTERNET-GREEN | rem:1206_LED_REVERSE | D1 |
| 1 | LAN-YELLOW | rem:1206_LED_REVERSE | D2 |
| 1 | MGA-62563 | TO_SOT_Packages_SMD:SC-70-6 | U2 |
| 1 | NOSTUFF | agg:0402 | C15 |
| 1 | NX7002AK | agg:SOT-23 | Q1 |
| 1 | PAD | rem:BMI-S-x05 | P1 |
| 1 | RSSI-RED | rem:1206_LED_REVERSE | D4 |
| 1 | STTH1L06 | agg:DO-214AC-SMA | D6 |
| 1 | TG-5006CJ | rem:TG-5006CJ | IC4 |
| 1 | TPS73433 | agg:SOT-23-5 | IC2 |
| 1 | TX-RED | rem:1206_LED_REVERSE | D5 |
The 112 most common of 118 parts.
More from richardeoin/ax
5- 2 layers100 × 80 mm
Panel
richardeoin/ax
This repository contains hardware and software for the AX5043 and AX5243 radios from AxSemi (now ON Semiconductor). They are probably the same die, but the AX5243 has fewer pins.
134 parts48 - 2 layers65 × 56 mm
Ax gateway
richardeoin/ax
This repository contains hardware and software for the AX5043 and AX5243 radios from AxSemi (now ON Semiconductor). They are probably the same die, but the AX5243 has fewer pins.
92 parts48 - 2 layers41 × 60.5 mm
Ax chip
richardeoin/ax
This repository contains hardware and software for the AX5043 and AX5243 radios from AxSemi (now ON Semiconductor). They are probably the same die, but the AX5243 has fewer pins.
76 parts48 - 2 layers19 × 16 mm
Ax breakout
richardeoin/ax
This repository contains hardware and software for the AX5043 and AX5243 radios from AxSemi (now ON Semiconductor). They are probably the same die, but the AX5243 has fewer pins.
28 parts48
Similar boards
- 2 layers45 × 45 mm
- 2 layers149.9 × 99.5 mm
- 2 layers231 × 155 mm
GX894-PWB
NaokiS28/Konami-System-573-Documentation
Schematics and pinout information for the Konami System 573
128 parts16 - 4 layers80.6 × 54 mm
Frank next proto
rh1tech/frank-lab
FRANK Board Laboratory (work-in-progress board prototopyes)
211 parts4GPL-3.0 - 2 layers275 × 200 mm
- 4 layers80 × 72 mm
- 2 layers153.6 × 35.9 mm
Sthymuli cardinalboard.kicad pro
nathmo/Sthymuli-cardinalboard
companion boardto the sthymuli motherboard
31 parts - 4 layers97 × 78 mm
PUTM EV Frontbox 2023
PUT-Motorsport/PUTM_EV_FRONTBOX
PCB board aquiring data from the front side of the vehicle
322 partsMIT
Questions
How big is the Panel PCB?
It measures 100 × 80 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Panel use?
118 parts, built around the DS2401P+T&R, TPS73433DRV, NX7002AK and STTH1L06. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Panel KiCad files?
From the richardeoin/ax repository on GitHub, at the commit this page was made from: the board is hw/chip/panel/panel.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Panel design in my own project?
Its repository states no licence, so its author keeps all rights: ask richardeoin before reusing the design.