
OpenBCI ESP32 ADS1298
ribbotson/OpenBCI_ESP32
Clone of OpenBCI Brain Computer Interface Hardware using ESP32 Processor

Clone of OpenBCI Brain Computer Interface Hardware using ESP32 Processor
OpenBCI ESP32 INPUT is an open-source printed circuit board by ribbotson, from the ribbotson/OpenBCI_ESP32 repository on GitHub. It is a 2-layer board of 50 × 50 mm with 80 parts on 75 nets, routed with 714 tracks and 41 vias.
It is built around the TPD4E1B06DCK. Its parts include 35 capacitors, 29 resistors, 7 ICs and 4 connectors. It belongs with the ESP32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 19 | 1n | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C4, C5, C6, C10, C11, C12, C13, C14, C15, C16, C33, C34, C35 +3 |
| 19 | 2k2 | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4, R5, R6, R10, R11, R12, R13, R14, R15, R16, R22, R23, R24 +3 |
| 8 | 0R | Resistor_SMD:R_0603_1608Metric | R18, R19, R20, R21, R25, R26, R27, R29 |
| 7 | 1u | Capacitor_SMD:C_0603_1608Metric | C18, C19, C21, C26, C28, C30, C32 |
| 6 | 0.1u | Capacitor_SMD:C_0603_1608Metric | C20, C23, C25, C27, C29, C31 |
| 6 | TPD4E1B06 | Package_TO_SOT_SMD:SOT-363_SC-70-6 | U1, U2, U3, U4, U5, U6 |
| 4 | MountingHole | MountingHole:MountingHole_2.7mm_M2.5 | H1, H2, H3, H4 |
| 1 | 100u | Capacitor_SMD:C_1210_3225Metric | C17 |
| 1 | 10u | Capacitor_SMD:C_0805_2012Metric | C22 |
| 1 | 1M | Resistor_SMD:R_0603_1608Metric | R17 |
| 1 | 1nf | Capacitor_SMD:C_0603_1608Metric | C24 |
| 1 | ADS1299IPAG1 | Package_QFP:TQFP-64_10x10mm_P0.5mm | U7 |
| 1 | Conn_02x02_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x02_P2.54mm_Vertical | J4 |
| 1 | Conn_02x03_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x03_P2.54mm_Vertical | J3 |
| 1 | Conn_02x08_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x08_P2.54mm_Vertical | J2 |
| 1 | Conn_02x13_Odd_Even | OpenBCI_ESP32:PinHeader_2x13_P2.54mm_OpenBCI | J1 |
| 1 | Logo_Open_Hardware_Small | Symbol:OSHW-Logo2_7.3x6mm_SilkScreen | LOGO1 |
| 1 | NF | Resistor_SMD:R_0603_1608Metric | R28 |

ribbotson/OpenBCI_ESP32
Clone of OpenBCI Brain Computer Interface Hardware using ESP32 Processor

ribbotson/OpenBCI_ESP32
Clone of OpenBCI Brain Computer Interface Hardware using ESP32 Processor

OpenBCI/Ganglion_Hardware_Design_Files
General repo for Ganglion hardware files

neuroidss/FreeEEG32-alpha1.0
ALPHA1.0 TEST FAILED, USE NEW VERSION INSTEAD FreeEEG32 alpha1.0 32 channels mobile electroencephalography under GNU AGPL 24 bits, 4kSPS ADCs 4x AD7770 MCU STM32F427ZI WIFI ESP-12F (ESP8266) USB CP2102N Accel & hyro…

prototipado/bioamp
BioAmp is an opensource project of a multichannel biopotential adquisition system for EEG, EMG, EOG and EOG signals.

kennito2035/convey
CONVEY: open 8-channel patient-isolated EEG/sEMG/ECG acquisition board (ADS1299, KiCad 10)

yelabb/pcbfork
A browser sandbox testing if LLMs can optimize KiCad board layouts by treating the AI as an untrusted proposal generator for low-noise biosignal PCBs


CalebBurton/Low-Cost_EEG
Repo for storing files related to the Low-Cost EEG project at Stellenbosch University during the 2018 Global Health Technologies exchange with Northwestern University.

It measures 50 × 50 mm and has 2 copper layers, 1.6 mm thick.
80 parts, built around the TPD4E1B06DCK. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ribbotson/OpenBCI_ESP32 repository on GitHub, at the commit this page was made from: the board is OpenBCI_ESP32_INPUT/OpenBCI_ESP32_INPUT.kicad_pcb and its schematic OpenBCI_ESP32_ADS1298/ADS1298.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ribbotson before reusing the design.