
Ganglion 01
OpenBCI/Ganglion_Hardware_Design_Files
General repo for Ganglion hardware files

Repo for storing files related to the Low-Cost EEG project at Stellenbosch University during the 2018 Global Health Technologies exchange with Northwestern University.
Ganglion 01 is an open-source printed circuit board by CalebBurton, from the CalebBurton/Low-Cost_EEG repository on GitHub. It is a 4-layer board of 61.2 × 61.2 mm with 99 parts on 67 nets, routed with 1,193 tracks and 131 vias.
It is built around the LM7332MA, MCP6001OB and 74LVC1G66GW, with the MCP6V31U-E/LT, TPD4E1B06DCK and 74LVC2G00GT among its other parts. Its parts include 36 capacitors, 31 resistors, 21 ICs, 5 connectors and 2 diodes.
Repo for storing files related to the Low-Cost EEG project at Stellenbosch University during the 2018 Global Health Technologies exchange with Northwestern University.
Hardware is modified from the OpenBCI Ganglion, firmware is copied directly from the Ganglion library with no modification.
All design files were made with KiCad EDA software.
Tested with Arduino IDE v1.8.5, utilizing Simblee library v1.1.4 from https://www.simblee.com/package_simblee166_index.json. See this page for instructions on adding an external board to your board manager.
Programmed using an FTDI cable. FTDI drivers are not yet supported on macOS versions 10.11.0 and above, so programming was done in a Windows 10 virtual machine.
The OpenBCI GUI, used for visualizing and analyzing the output data, can be downloaded from OpenBCI's downloads page. OpenBCI also provides documentation for the Ganglion and the GUI.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 0.1uF | Capacitors_SMD:C_0603 | C1, C2, C3, C4, C15, C16, C20, C21, C22, C24, C26, C27, C31, C32 |
| 13 | 1uF | Capacitors_SMD:C_0603 | C10, C11, C14, C17, C19, C23, C25, C28, C30, C33, C40, C45, C46 |
| 10 | 100K | Resistors_SMD:R_0603 | R15, R17, R27, R28, R32, R33, R37, R44, R45, R46 |
| 5 | 1K | Resistors_SMD:R_0603 | R23, R24, R40, R41, R47 |
| 4 | 1M | Capacitors_SMD:C_0603 | R1, R12, R14, R30 |
| 4 | 330K | Resistors_SMD:R_0603 | R2, R4, R11, R49 |
| 3 | 10uF | Capacitors_SMD:C_0603 | C18, C29, C34 |
| 3 | 74LVC1G66 | TO_SOT_Packages_SMD:SC-70-5 | U18, U21, U22 |
| 3 | MCP6V31U | TO_SOT_Packages_SMD:SC-70-5 | U1, U25, U26 |
| 2 | 18pF | Capacitors_SMD:C_0603 | C38, C43 |
| 2 | 1M | Resistors_SMD:R_0603 | R42, R43 |
| 2 | 22uF | Capacitors_SMD:C_0603 | C9, C39 |
| 2 | 2K | Resistors_SMD:R_0603 | R16, R18 |
| 2 | 500K | Capacitors_SMD:C_0603 | R34, R36 |
| 2 | AD8237 | Housings_SSOP:MSOP-8_3x3mm_Pitch0.65mm | U2, U3 |
| 2 | CONN_01X04 | Socket_Strips:Socket_Strip_Straight_1x04 | P2, P3 |
| 2 | CONN_01X08 | Socket_Strips:Socket_Strip_Straight_1x08 | P4, P5 |
| 2 | NCP551 | TO_SOT_Packages_SMD:SOT-23-5 | U9, U11 |
| 2 | TPD4E1B06 | TO_SOT_Packages_SMD:SC-70-6 | U28, U29 |
| 1 | 0.01uF | Capacitors_SMD:C_0603 | C36 |
| 1 | 100 | Resistors_SMD:R_0603 | R39 |
| 1 | 100uF | Capacitors_SMD:C_1210 | C35 |
| 1 | 10K | Resistors_SMD:R_0603 | R38 |
| 1 | 74LVC2G00 | OpenBCI:VSSOP-8 | U23 |
| 1 | AD5621 | TO_SOT_Packages_SMD:SC-70-6 | U12 |
| 1 | CONN_02X08 | Pin_Headers:Pin_Header_Angled_2x08 | P1 |
| 1 | Crystal_Small | Crystals:Crystal_HC49-SD_SMD | Y1 |
| 1 | D_Schottky | Capacitors_SMD:C_0603 | D1 |
| 1 | JS_2_Battery | OpenBCI:JST_RA_SMT | B1 |
| 1 | LED | LEDs:LED_0603 | D2 |
| 1 | LM7332 | Housings_SSOP:MSOP-8_3x3mm_Pitch0.65mm | U6 |
| 1 | MCP3912 | Housings_SSOP:SSOP-28_5.3x10.2mm_Pitch0.65mm | U7 |
| 1 | MCP6001 | TO_SOT_Packages_SMD:SC-70-5 | U15 |
| 1 | MCP6V13T | TO_SOT_Packages_SMD:SOT-23-5 | U14 |
| 1 | NCP300 | TO_SOT_Packages_SMD:SOT-23-5 | U10 |
| 1 | SEEED_microSD | OpenBCI:ST-TF-0003A | U13 |
| 1 | SPDT | OpenBCI:SSSS810701 SSSS810701 | SW5 |
| 1 | TACT_SWITCH | OpenBCI:PTS810 | SW6 |
| 1 | rfd_77101 | OpenBCI:RFD77101 | U8 |

OpenBCI/Ganglion_Hardware_Design_Files
General repo for Ganglion hardware files



neuroidss/FreeEEG32-alpha1.0
ALPHA1.0 TEST FAILED, USE NEW VERSION INSTEAD FreeEEG32 alpha1.0 32 channels mobile electroencephalography under GNU AGPL 24 bits, 4kSPS ADCs 4x AD7770 MCU STM32F427ZI WIFI ESP-12F (ESP8266) USB CP2102N Accel & hyro…

prototipado/bioamp
BioAmp is an opensource project of a multichannel biopotential adquisition system for EEG, EMG, EOG and EOG signals.

ribbotson/OpenBCI_ESP32
Clone of OpenBCI Brain Computer Interface Hardware using ESP32 Processor

kennito2035/convey
CONVEY: open 8-channel patient-isolated EEG/sEMG/ECG acquisition board (ADS1299, KiCad 10)

yelabb/pcbfork
A browser sandbox testing if LLMs can optimize KiCad board layouts by treating the AI as an untrusted proposal generator for low-noise biosignal PCBs
It measures 61.2 × 61.2 mm and has 4 copper layers, 1.6 mm thick.
99 parts, built around the LM7332MA, MCP6001OB, 74LVC1G66GW and MCP6V31U-E/LT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the CalebBurton/Low-Cost_EEG repository on GitHub, at the commit this page was made from: the board is CAD Files/V01/Ganglion_01.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask CalebBurton before reusing the design.