
Gps
xDocka15/GNSS_geret
Dokument popisuje zmeny/upravy v elektronike gnss-geret z 2024 tak aby vznikla jednodoskova prenostitelna verzia.
I learned that the real-time transit information for the Cincinnati Streetcar was published by Metro here: https://www.go-metro.com/about/developer-data/ in GTFS form.
StreetcarGTFSMap is an open-source printed circuit board by rgw3d, from the rgw3d/CincyStreetcarTracker repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 50.8 × 76.2 mm with 52 parts on 53 nets, routed with 447 tracks and 69 vias.
It is built around the ESP32-C3-WROOM-02-H4, HT16K33A and RT9080-TD, with the BSS138 among its other parts. Its parts include 19 diodes, 10 resistors, 4 capacitors, 3 ICs and 2 transistors. It belongs with the ESP32 and RISC-V boards of this library.
I learned that the real-time transit information for the Cincinnati Streetcar was published by Metro here: https://www.go-metro.com/about/developer-data/ in GTFS form.
And then I saw https://www.traintrackr.io/ and was inspired to make a version for Cincinnati.
![]()
| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | LED_Small_Filled | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D2, D3, D4, D5, D6, D7, D10, D11, D12, D13, D14, D15, D16, D17, D18 +2 |
| 5 | 10K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R4, R5, R6, R7 |
| 3 | 2.2uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C4 |
| 2 | 100K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9, R10 |
| 2 | 5.1K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2 |
| 2 | BSS138 | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q1, Q2 |
| 2 | RST | TestPoint:TestPoint_Pad_2.5x2.5mm | TP8, TP10 |
| 2 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mm | JP2, JP3 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3 |
| 1 | 4.7K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8 |
| 1 | BOOT_SWITCH | Button_Switch_SMD:SW_SPST_PTS647_Sx50 | SW2 |
| 1 | ESP32-C3-WROOM-02 | RF_Module:ESP32-C3-WROOM-02 | U2 |
| 1 | GND | TestPoint:TestPoint_Pad_2.5x2.5mm | TP9 |
| 1 | HT16K33A | Package_SO:SOP-28_8.4x18.16mm_P1.27mm | U1 |
| 1 | IO10 | TestPoint:TestPoint_Pad_2.5x2.5mm | TP5 |
| 1 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D100 |
| 1 | MTCK | TestPoint:TestPoint_Pad_2.5x2.5mm | TP3 |
| 1 | MTDI | TestPoint:TestPoint_Pad_2.5x2.5mm | TP2 |
| 1 | MTDO | TestPoint:TestPoint_Pad_2.5x2.5mm | TP4 |
| 1 | MTMS | TestPoint:TestPoint_Pad_2.5x2.5mm | TP1 |
| 1 | MountingHole | MountingHole:MountingHole_2.1mm | H1 |
| 1 | RST_SWITCH | Button_Switch_SMD:SW_SPST_PTS647_Sx50 | SW1 |
| 1 | RT9080 | Package_TO_SOT_SMD:TSOT-23-5 | U3 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |

xDocka15/GNSS_geret
Dokument popisuje zmeny/upravy v elektronike gnss-geret z 2024 tak aby vznikla jednodoskova prenostitelna verzia.


HekiNav/finland-live-train-map
Some of the LEDs are missing because they were removed after making the initial layout


AarnimM22/HD800-wireless
dual CS43131 + nrf5340 DAC/AMP for turning Sennheiser HD800 into wireless



danpham/nixie_clock
ESP32-C3 Nixie clock using IN14/IN3 tubes and HV5622 driver.
It measures 50.8 × 76.2 mm and has 2 copper layers, 1.6 mm thick.
52 parts, built around the ESP32-C3-WROOM-02-H4, HT16K33A, RT9080-TD and BSS138. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the rgw3d/CincyStreetcarTracker repository on GitHub, at the commit this page was made from: the board is hardware/StreetcarGTFSMap/StreetcarGTFSMap.kicad_pcb and its schematic hardware/StreetcarGTFSMap/StreetcarGTFSMap.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).