

MainConnector
- Size
- 99.1 × 99.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 56
- Nets
- 125
- Pads
- 263
- Tracks, vias
- 541, 125
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 17 Feb 2020
- Updated
- 6 Mar 2020
Overview
MainConnector is an open-source printed circuit board by revilo196, from the revilo196/Vac32Bot repository on GitHub. It is a 2-layer board of 99.1 × 99.1 mm with 56 parts on 125 nets, routed with 541 tracks and 125 vias.
It is built around the IRLZ44N, S8050 and S8550. Its parts include 16 resistors, 7 connectors, 5 diodes, 3 capacitors and 2 transistors.
Main components
3IRLZ44N
TO-22055V 47A N-Channel HEXFET® Power MOSFETInfineon TechnologiesUncategorisedS8050
SOT-23-55℃~+150℃ 1 NPN 100MHz 100nA 120 25V 300mW 500mA 5V 600mV NPN SOT-23 Bipolar (BJT) ROHShongjiachengBipolar (BJT)S8550
SOT-23-55℃~+150℃ 1 PNP 100nA 120 150MHz 25V 300mW 500mA 5V 600mV PNP SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)
README
README.mdVac32Bot
Clening roboter using STM32 and MBED
Parts
56| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | R | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R2, R3, R4, R5, R6, R7, R8 |
| 6 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H2, H2, H3, H4, H5, H6 |
| 5 | LED_Small | LED_SMD:LED_1206_3216Metric | D1, D2, D3, D4, D5 |
| 4 | 4.7k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R9, R10, R11, R12 |
| 3 | Conn_01x02 | Connector_JST:JST_EH_B02B-EH-A_1x02_P2.50mm_Vertical | J6, J8, JBattery1 |
| 3 | Conn_01x04 | Connector_JST:JST_EH_B04B-EH-A_1x04_P2.50mm_Vertical | J12, J13, J14 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R14, R16 |
| 2 | C | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C2, C3 |
| 2 | Conn_01x03 | Connector_JST:JST_EH_B03B-EH-A_1x03_P2.50mm_Vertical | ENC1, ENC2 |
| 2 | Conn_01x05 | Connector_JST:JST_EH_B05B-EH-A_1x05_P2.50mm_Vertical | I2C1, I2C2 |
| 2 | Conn_01x19 | Connector_PinHeader_2.54mm:PinHeader_1x19_P2.54mm_Vertical | ESP1, ESP2 |
| 2 | IRLZ44N | Package_TO_SOT_THT:TO-220-3_Vertical | Q1, Q2 |
| 2 | Jumper_NC_Dual | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP1, JP2 |
| 2 | S8050 | Package_TO_SOT_THT:TO-92_Inline | QNPN1, QNPN2 |
| 2 | S8550 | Package_TO_SOT_THT:TO-92_Inline | QPNP1, QPNP2 |
| 1 | 2.7k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R15 |
| 1 | 6.8k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R13 |
| 1 | CP_Small | Capacitor_SMD:CP_Elec_5x5.4 | C1 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | Conn_01x07 | Connector_JST:JST_EH_B07B-EH-A_1x07_P2.50mm_Vertical | MOTOR1 |
| 1 | Conn_01x08 | Connector_JST:JST_EH_B08B-EH-A_1x08_P2.50mm_Vertical | LIDAR1 |
| 1 | Conn_01x09 | Connector_JST:JST_EH_B09B-EH-A_1x09_P2.50mm_Vertical | SONAR1 |
| 1 | Conn_01x10 | Connector_JST:JST_EH_B10B-EH-A_1x10_P2.50mm_Vertical | MPU1 |
| 1 | NUCLEO64-F411RE | Module:ST_64_NUC | U2 |
More from revilo196/Vac32Bot
1- 2 layers35.6 × 58.4 mm

Similar boards
- 2 layers100.3 × 75.5 mm

- 2 layers

IEC-62056-21-Optical Probe
twam/IEC-62056-21-Optical-Probe
Optical-Probe for reading out power meters supporting IEC 62056-21 via USB
38 parts33 - 2 layers116.9 × 37.5 mm

Power Control Circuit
ambadran/spot-welder
Battery Spot Welder Circuit Using Capactive Discharge (CD) Circuit
41 parts2 - 2 layers140 × 27 mm

- 2 layers40.5 × 36.6 mm

XDuinoRails Hermes M
xDuinoRails/xDuinoRails_Hermes-M
Your DCC/Railcom signals and a +5V power source for your microcontroller on a breadboard
27 parts2CERN-OHL-W-2.0 - 6 layers30 × 20.1 mm

XDuinoRails Thor M
xDuinoRails/xDuinoRails_Thor
Make a Seeed XIAO board a mtc21 decoder, all the electronics needed is on this little board: - mtc21/plux16 compatible connector - DC Motor - 2x Functions - DCC / DCC-ACK / RailCom
46 parts1 - 2 layers90.7 × 55.4 mm

H bridge V3
ambadran/Revolute_Joint
Optimal Cheap Robotic Actuator allowing high Torque and moderate Speed. Allow PRECISE Absolute, Speed and Torque Control. Using 3D-printed Cycloidal Drive, Custom PCB and LQR Control Algorithm.
57 parts - 2 layers99.1 × 99 mm

XDuinoRail Debug
chatelao/xDuinoRail-Decoder
The friendly decoder development plattform for model railroad tinkers.
170 partsAGPL-3.0
Questions
How big is the MainConnector PCB?
It measures 99.1 × 99.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MainConnector use?
56 parts, built around the IRLZ44N, S8050 and S8550. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MainConnector KiCad files?
From the revilo196/Vac32Bot repository on GitHub, at the commit this page was made from: the board is hadware/mainboard/MainConnector.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the MainConnector design in my own project?
Its repository states no licence, so its author keeps all rights: ask revilo196 before reusing the design.