2 layers242.9 × 95.3 mm
4 layers44.5 × 40.6 mm
MoonPad
RephlexZero/MoonPad3Hall-effect keypad designed in KiCad, with case files
- Size
- 44.5 × 40.6 mm
- Copper layers
- 4
- Thickness
- 1.61 mm
- Parts
- 60
- Nets
- 66
- Pads
- 236
- Tracks, vias
- 263, 63
- Pours
- 14
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 11 May 2023
- Updated
- 17 Oct 2023
Overview
MoonPad is an open-source printed circuit board by RephlexZero, from the RephlexZero/MoonPad repository on GitHub. It is a 4-layer board of 44.5 × 40.6 mm with 60 parts on 66 nets, routed with 263 tracks and 63 vias.
It is built around the RP2040, SLSS49E-3 and W25Q16JVUXIQ, with the AP2112K-3.3, SK6812MINI-E and PRTR5V0U2X among its other parts. Its parts include 27 capacitors, 9 resistors, 7 diodes, 5 ICs and 2 connectors. It belongs with the RP2040 boards of this library.
Main components
7
RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)
SLSS49E-3
SOT-23-40℃~+150℃ 1.5mA 3V~12V 5mA Built-in Schmitt trigger Omnipolar SOT-23 Linear Hall Sensors ROHSSlkorHall Switches
W25Q16JVUXIQ
USON-8-EP(2x3)-40℃~+85℃ 100,000 cycles 10uA 133MHz 16Mbit 2.7V~3.6V 20 Years 3ms SPI USON-8-EP(2x3) NOR FLASH ROHSWinbond ElecNOR FLASH
AP2112K-3.3
SOT253.3V 600mA CMOS Low Dropout Linear Regulator with EnableDiodes IncorporatedUncategorised
SK6812MINI-E
SMD-40℃~+85℃ 0.6mA 1.78mm 120mcd~240mcd 120° 160mcd~320mcd 1kHz 2.8mm 2000V 3.2mm 3.7V~5.5V 460nm~470nm 515nm~525nm 620nm~625nm 800Kbit/s 815mcd~1275mcd Semi-transparent lens SMD RGB LEDs(Built-in IC) ROHSOPSCO OptoelectronicsRGB LEDs(Built-In IC)
PRTR5V0U2X
SOT-143-55℃~+125℃ 0.3pF、0.8pF 100W 10V、15V 5V 6.5V 6A 80nA ESD IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 Three channels Unidirectional SOT-143 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)
X322512MSB4SI
SMD3225-4P-40℃~+85℃ 12MHz 20pF 80Ω Crystal Oscillator ±10ppm ±20ppm SMD3225-4P Crystals ROHSYXCCrystals
Parts
60| Qty | Value | Footprint | References |
|---|---|---|---|
| 21 | 100n | Capacitor_SMD:C_0402_1005Metric | C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25, C26 +5 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4 |
| 4 | SK6812MINI | Moonpad:LED_SK6812MINI-B-012_3.7x3.5mm_P1.1mm | D2, D3, D4, D5 |
| 2 | 10k | Resistor_SMD:R_0402_1005Metric | R7, R8 |
| 2 | 1k | Resistor_SMD:R_0402_1005Metric | R1, R5 |
| 2 | 1u | Capacitor_SMD:C_0805_2012Metric | C1, C4 |
| 2 | 1u | Capacitor_SMD:C_0402_1005Metric | C8, C10 |
| 2 | 27 | Resistor_SMD:R_0402_1005Metric | R3, R4 |
| 2 | 30p | Capacitor_SMD:C_0402_1005Metric | C2, C3 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R2, R6 |
| 2 | SK6812MINI-E | kicad-keyboard-parts:MX_SK6812MINI-E_REV | D1, D6 |
| 2 | SLSS49E-3 | Package_TO_SOT_SMD:SOT-23 | U4, U5 |
| 2 | Wooting_1.00u | Button_Switch_Keyboard:Wooting_1.00u | X, Z |
| 1 | 1.1A | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | 470 | Resistor_SMD:R_0402_1005Metric | RLED1 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U6 |
| 1 | DNP | Capacitor_SMD:C_0402_1005Metric | R9 |
| 1 | OLED | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | PRTR5V0U2X | Package_TO_SOT_SMD:SOT-143 | D7 |
| 1 | RP2040 | Moonpad:RP2040-QFN-56 | U3 |
| 1 | Reset | Button_Switch_SMD:SW_SPST_TL3342 | SW1 |
| 1 | USB-C 2.0 Receptacle | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J3 |
| 1 | W25Q16JVUXIQ | W25Q16JVUXIQ:SON50P300X200X60-9N | IC1 |
| 1 | X322512MSB4SI | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
Questions
How big is the MoonPad PCB?
It measures 44.5 × 40.6 mm and has 4 copper layers, 1.61 mm thick.
What parts does the MoonPad use?
60 parts, built around the RP2040, SLSS49E-3, W25Q16JVUXIQ and AP2112K-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MoonPad KiCad files?
From the RephlexZero/MoonPad repository on GitHub, at the commit this page was made from: the board is MoonPad.kicad_pcb and its schematic MoonPad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the MoonPad design in my own project?
Its repository states no licence, so its author keeps all rights: ask RephlexZero before reusing the design.
Similar boards
- 2 layers248.9 × 120.7 mm
16nx
16n-faderbank/16nx
16nx is a controller for musical instruments. Sixteen faders,MIDI over USB and jack, CV out, and I2C out. Based around RP2040.
171 parts76 - 4 layers9.3 × 66.8 mm
- 4 layers
- 2 layers21 × 51 mm
Orphkicad
adammakesthingsdev/Orpheus-Pico-Kicad
Kicad files and JLCPCB production gerbers for Orpheus Pico
43 parts13 - 2 layers285.1 × 94.6 mm
YM60JIS PCB
ymkn/YM60JIS
A JIS layout 60% hot swappable custom mechanical keyboard PCB powered by RP2040.
173 parts10MIT - 2 layers285.1 × 94.6 mm
YuTofu PCB
ymkn/YuTofu
YuTofu is an unofficial compatible PCB for the well-known custom keyboard Tofu60 2.0.
169 parts5MIT - 2 layers228.8 × 76.2 mm
