

Ethernet bob base
AC Servo Driver for STM32F4
- Size
- 100 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 112
- Nets
- 158
- Pads
- 509
- Tracks, vias
- 544, 92
- Pours
- 10
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 9 Dec 2013
- Updated
- 23 Aug 2023
Overview
Ethernet bob base is an open-source printed circuit board by rene-dev, from the rene-dev/stmbl repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 100 × 100 mm with 112 parts on 158 nets, routed with 544 tracks and 92 vias.
It is built around the MCP2551-I/SN-HG, TJA1021T/10/C and LM5017MR, with the MC33879APEK among its other parts. Its parts include 46 resistors, 31 capacitors, 14 connectors, 8 diodes and 5 ICs. It belongs with the robots and motor control and interfaces and adapters boards of this library.
Main components
4MCP2551-I/SN-HG
SOP-8SOP-8 CAN Transceivers ROHSHGSEMICAN TransceiversTJA1021T/10/C
SO-81 1 10uA 175mV 4mA 5.5V~27V Transceiver ±6kV SO-8 LIN Transceivers ROHSNXP SemiconductorsLIN TransceiversLM5017MR
SO-8-40℃~+125℃@(TJ) 1 1.75uA 225kHz~1MHz 600mA 7.5V~100V Adjustable Buck Buck Built-in Yes SO-8 DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersMC33879APEK
SOT-1746-1-40℃~+125℃ 1.2A 5.5V~27.5V 750mΩ 8 Active High High Side Switch、Low Side Switch Overvoltage Protection、Under-voltage lockout、Reverse voltage protection、Overcurrent Protection、Over temperature protection、Short-Circuit Protection SOT-1746-1 Power Distribution Switches ROHSNXP SemiconductorsPower Distribution Switches
README
README.mdBuild Log: https://travis-ci.org/rene-dev/stmbl
DISCLAIMER
THE AUTHORS OF THIS SOFTWARE ACCEPT ABSOLUTELY NO LIABILITY FOR ANY HARM OR LOSS RESULTING FROM ITS USE. IT IS EXTREMELY UNWISE TO RELY ON SOFTWARE ALONE FOR SAFETY. Any machinery capable of harming persons must have provisions for completely removing power from all motors, etc, before persons enter any danger area. All machinery must be designed to comply with local and national safety codes, and the authors of this software can not, and do not, take any responsibility for such compliance.
This software is released under the GPLv3.
STMBL
There is work in progress on documentation: https://github.com/rene-dev/stmbl/blob/master/docs/src/Getting%20Started.adoc
IRC: #stmbl on irc.hackint.eu https://webirc.hackint.org/#stmbl
STMBL is an open source servo drive designed for Retrofitting CNC machines and Robots. It supports Industrial AC and DC servos with up to 320V and 2kW (see specs for details).
Documentation about the PCB and pinout of the feedback connector:
https://github.com/rene-dev/stmbl/wiki/Pinouts
https://github.com/rene-dev/stmbl/wiki/PCB
Hardware version 4.1

Driving a Bosch Turboscara
https://www.youtube.com/watch?v=d6NH1W7DUnQ
https://www.youtube.com/watch?v=oTllxnYAgFc
Driving a Manutec Robot
https://www.youtube.com/watch?v=gwgnAeGjZrA
https://www.youtube.com/watch?v=wXLcAZwjlzE
Driving a Weeke BP12 VMC
https://www.youtube.com/watch?v=24LftGNp4MI
Driving a Haas VF0 (Spindle + Axes)
https://www.youtube.com/watch?v=kqenepupJIs
Drivetest
https://www.youtube.com/watch?v=-E1o_5cFyto
Supported Motors
- Synchronous AC Servos
- Asynchronous AC Servos
- DC Servos
- 2 Phase HF spindle motors
Supported Feedback systems
- Resolvers
- Incremental encoders
- sin/cos encoder interpolation
- Mitsubishi absolute encoders
- Sanyo Denki absolute encoders
- Yaskawa absolute encoders
- Sick HIPERFACE®
- Tamagawa SmartAbs
Planned:
- EnDat
- BiSS
- SSI
- Sanyo Denki wire-saving incremental encoder
Supported Position/Velocity Commands Inputs:
- Smartserial
- Quadrature
- Step/direction
- RS485
TODO
- Sensorless FOC
Directories
- hw/spice/ Spice simulation for resolver interface
- hw/kicad/v4.0/ kicad files for version 4
- src/ STM32F4 code, command, feedback and control loop
- stm32f303/ STM32F3 code, running on the HV side, generating PWM
Commercial Applications
Should you find the GPL license insufficient for your needs, other licenses can be purchased from my company.
Likewise, please contact us should you wish to fund the further development of this project, or are interesed in custom hardware, software, or commercial support.
Parts
112| Qty | Value | Footprint | References |
|---|---|---|---|
| 41 | R | stmbl-kicad-lib:R_0603 | R1, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23, R24 +25 |
| 16 | C | stmbl-kicad-lib:C_0805 | C18, C19, C20, C21, C22, C23, C24, C25, C26, C27, C28, C29, C30, C31, C32, C33 |
| 8 | Conn_01x04_Male | stmbl-kicad-lib:RM3.5_1x4_UP | J5, J6, J7, J8, J9, J10, J11, J12 |
| 8 | LED | stmbl-kicad-lib:LED-0805 | D1, D2, D3, D4, D5, D6, D7, D8 |
| 5 | 100n | stmbl:C_0805 | C2, C12, C13, C14, C15 |
| 4 | 20µ | Capacitors_SMD:CP_Elec_6.3x7.7 | C1, C7, C10, C11 |
| 4 | MountingHole_Pad | Mounting_Holes:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H4 |
| 2 | 10µ | stmbl:C_0805 | C8, C9 |
| 2 | CONN_02X25 | Pin_Headers:Pin_Header_Straight_2x25_Pitch2.54mm | P1, P2 |
| 2 | Conn_01x02_Male | stmbl-kicad-lib:RM3.5_1x2_UP | J3, J4 |
| 2 | MC33879A | stmbl-kicad-lib:SOICW_32_EPAD | U4, U5 |
| 2 | SolderJumper_3_Bridged12 | stmbl-kicad-lib:SOLDER_JUMPER_3_NC | JP1, JP2 |
| 1 | 100k | stmbl:R_0603 | R4 |
| 1 | 100n | stmbl:C_0603 | C4 |
| 1 | 10n | stmbl:C_0603 | C6 |
| 1 | 127k | stmbl:R_0603 | R2 |
| 1 | 1k | stmbl:R_0603 | R6 |
| 1 | 1µ | stmbl:C_0805 | C5 |
| 1 | 220n | stmbl:C_0805 | C3 |
| 1 | 22µ 650mA | stmbl:SMD_INDUCTOR_32x25 | L1 |
| 1 | 25k | stmbl:R_0603 | R3 |
| 1 | 3.09k | stmbl:R_0603 | R5 |
| 1 | Conn_01x02_Male | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J2 |
| 1 | DB9_Male | Connectors_DSub:DSUB-9_Male_Vertical_Pitch2.77x2.84mm_MountingHoles | J1 |
| 1 | LM5017MR | stmbl-kicad-lib:SO8_PowerPAD | U1 |
| 1 | MCP2551-I-SN | stmbl-kicad-lib:SOIC-8-N | U3 |
| 1 | TJA1021T | stmbl-kicad-lib:SOIC-8-N | U2 |
| 1 | TestPoint | Measurement_Points:Measurement_Point_Round-TH_Small | TP1 |
More from rene-dev/stmbl
12- 4 layers59.2 × 66 mm

- 2 layers100 × 100 mm

- 2 layers100 × 100 mm

- 4 layers42 × 42 mm

- 4 layers99.8 × 74.9 mm

- 2 layers100 × 100 mm

- 2 layers99.9 × 99.9 mm

- 2 layers99.8 × 99.8 mm

- 2 layers100 × 100 mm

- 2 layers57 × 75 mm

- 2 layers87.5 × 50 mm

- 4 layers100 × 75 mm

Similar boards
- 4 layers84 × 66.5 mm

INV Board
davidmolony/MESC_FOC_ESC
MESC, Molony ESC, STM32F303 based FOC+BLDC ready, HALL, Encoder, Sensorless, single sides, 2 layer, ~90A @48V
192 parts60 - 2 layers

Ampli Test
andreadebortoli01/Irs2092S-Full-bridge
High-power 3 kW audio amplifier board based on 2 × IRS2092S drivers configured in a Full-Bridge (BTL) topology.
4 parts - 4 layers87.5 × 129.5 mm

- 2 layers

Kicad Workspace
maceintu/Ampli-D
Amplificateur audio stéréo classe D open hardware : entrées filaires et Bluetooth, DAC audiophile, pilotage par microcontrôleur STM32. Le dépôt contient l'ensemble de la conception — schémas, PCB et firmware.
162 parts - 2 layers100 × 100 mm

- 2 layers112 × 57 mm

Caravansensor
MartinVerges/womolin-waterlevel
DIY project to build a smart fuel sensor for RVs or in other projects. It is based on air pressure and is able to measure fresh water as well as grey and black water levels with high precision.
226 parts17 - 2 layers43 × 26 mm

LIN MFSW Adapter
mka1ugin/LIN_MFSW_Adapter
Аппаратно адаптер выполнен на микроконтроллере STM32F103C8T6, схема и печатная плата разработаны в среде KiCad. Печатная плата односторонняя, габаритные размеры 43 x 26 мм.
29 parts3 - 2 layers47.5 × 50 mm

J527
mka1ugin/J527
Дополнительный контроллер для подрулевого блока 5K0953569, реализующий работу кнопки ассистентов, круиза и обогрева руля
66 parts
Questions
How big is the Ethernet bob base PCB?
It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Ethernet bob base use?
112 parts, built around the MCP2551-I/SN-HG, TJA1021T/10/C, LM5017MR and MC33879APEK. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ethernet bob base KiCad files?
From the rene-dev/stmbl repository on GitHub, at the commit this page was made from: the board is hw/kicad/bob/ethernet_bob_base/ethernet_bob_base.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ethernet bob base design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).