
TKD GYRO
RemcoMusic/ultimate-kicking-bag-pcb
This PCB is created for the Reaction time project

This PCB is created for the Reaction time project
TKD PCB is an open-source printed circuit board by RemcoMusic, from the RemcoMusic/ultimate-kicking-bag-pcb repository on GitHub. It is a 2-layer board with 96 parts on 100 nets, routed with 554 tracks and 33 vias.
It is built around the ESP32-WROOM-32D, FT232RL and AMS1117-3.3, with the WS2812B, S8050 and ZXMN6A09GQTA among its other parts. Its parts include 37 capacitors, 30 diodes, 12 resistors, 6 ICs and 4 transistors. It belongs with the ESP32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 32 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C10, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25 +16 |
| 24 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23, D24, D25 +8 |
| 5 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C2, C3, C6, C8, C11 |
| 3 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R2, R5, R7 |
| 3 | D | Diode_SMD:D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D4, D6 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R9, R11 |
| 2 | 12k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R8, R10 |
| 2 | 22R | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R3 |
| 2 | 330R | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R4, R6 |
| 2 | LED | Diode_SMD:D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D3, D5 |
| 2 | S8050 | Package_TO_SOT_THT:TO-92_Inline | Q3, Q4 |
| 2 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1, SW2 |
| 2 | ZXMN6A09GQTA | SamacSys_Parts:SOT230P700X165-4N | Q1, Q2 |
| 1 | 1048 | SamacSys_Parts:1048 | U5 |
| 1 | 5k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R12 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | Conn_01x06 | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J2 |
| 1 | Conn_01x07 | Connector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_Vertical | J4 |
| 1 | Conn_01x08 | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J5 |
| 1 | D | Diode_SMD:D_SOD-123 | D2 |
| 1 | ESP32-WROOM-32D | RF_Module:ESP32-WROOM-32 | U4 |
| 1 | FT232RL | Package_SO:SSOP-28_5.3x10.2mm_P0.65mm | U2 |
| 1 | LM1085-5.0 | Package_TO_SOT_SMD:TO-263-3_TabPin4 | U3 |
| 1 | R5460N233AF-TR-FE | SamacSys_Parts:SOT95P280X140-6N | IC1 |
| 1 | SW_SPDT | SamacSys_Parts:AYZ0103AGRLC | SW3 |
| 1 | USB2066-05-RBHM-15-STB-00-00-A | SamacSys_Parts:USB206605RBHM15STB0000A | J1 |

RemcoMusic/ultimate-kicking-bag-pcb
This PCB is created for the Reaction time project


LSDRM/DualPressure-Thermocouple_forVMCGUI
A customized DAQ board through UART protocol, embeding two pressure sensors and one thermocouple. Has been developed to be used with VMCGUI.

Rikeroo/habit-reminder
Low energy physical habit reminder, using RGB LEDs, a small task screen and tactile switches to build useful habits and get tasks done

aditgoyal5/Forward_Ignition_PCB
This repository is about a printed circuit board I built for Team Sammard.


HowardsPlayPen/Project5-ESP32-WROOM-PZEM
ESP32 Wroom based board for connecting to PZEM board to monitor 240V

TDA-2030/E-ink-screen
An assistant to help you view text and picture calendars

sqfmi/HPDL-1414-20x2-ESP32
20x2 Character Display with HPDL-1414 modules & ESP32
96 parts, built around the ESP32-WROOM-32D, FT232RL, AMS1117-3.3 and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the RemcoMusic/ultimate-kicking-bag-pcb repository on GitHub, at the commit this page was made from: the board is TKD_PCB/TKD_PCB.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask RemcoMusic before reusing the design.